On 04/16/2014 08:30 AM, Oscar Mojica wrote:
How would be the command line to compile with the option -g ? What debugger can
I use?
Thanks
Replace any optimization flags (-O2, or similar) by -g.
Check if your compiler has the -traceback flag or similar
(man compiler-name).
The gdb debugger is normally available on Linux (or you can install it
with yum, apt-get, etc). An alternative is ddd, with a GUI (can also be
installed from yum, etc).
If you use a commercial compiler you may have a debugger with a GUI.
Enviado desde mi iPad
El 15/04/2014, a las 18:20, "Gus Correa" <g...@ldeo.columbia.edu> escribió:
Or just compiling with -g or -traceback (depending on the compiler) will
give you more information about the point of failure
in the error message.
On 04/15/2014 04:25 PM, Ralph Castain wrote:
Have you tried using a debugger to look at the resulting core file? It
will probably point you right at the problem. Most likely a case of
overrunning some array when #temps > 5
On Tue, Apr 15, 2014 at 10:46 AM, Oscar Mojica <o_moji...@hotmail.com
<mailto:o_moji...@hotmail.com>> wrote:
Hello everybody
I implemented a parallel simulated annealing algorithm in fortran.
The algorithm is describes as follows
1. The MPI program initially generates P processes that have rank
0,1,...,P-1.
2. The MPI program generates a starting point and sends it for all
processes set T=T0
3. At the current temperature T, each process begins to execute
iterative operations
4. At end of iterations, process with rank 0 is responsible for
collecting the solution obatined by
5. Each process at current temperature and broadcast the best
solution of them among all participating
process
6. Each process cools the temperatue and goes back to step 3, until
the maximum number of temperatures
is reach
I compiled with: mpif90 -o exe mpivfsa_version2.f
and run with: mpirun -np 4 ./exe in a single machine
So I have 4 processes, 1 iteration per temperature and for example
15 temperatures. When I run the program
with just 5 temperatures it works well, but when the number of
temperatures is higher than 5 it doesn't write the
ouput files and I get the following error message:
[oscar-Vostro-3550:06740] *** Process received signal ***
[oscar-Vostro-3550:06741] *** Process received signal ***
[oscar-Vostro-3550:06741] Signal: Segmentation fault (11)
[oscar-Vostro-3550:06741] Signal code: Address not mapped (1)
[oscar-Vostro-3550:06741] Failing at address: 0xad6af
[oscar-Vostro-3550:06742] *** Process received signal ***
[oscar-Vostro-3550:06740] Signal: Segmentation fault (11)
[oscar-Vostro-3550:06740] Signal code: Address not mapped (1)
[oscar-Vostro-3550:06740] Failing at address: 0xad6af
[oscar-Vostro-3550:06742] Signal: Segmentation fault (11)
[oscar-Vostro-3550:06742] Signal code: Address not mapped (1)
[oscar-Vostro-3550:06742] Failing at address: 0xad6af
[oscar-Vostro-3550:06740] [ 0]
/lib/x86_64-linux-gnu/libc.so.6(+0x364a0) [0x7f49ee2224a0]
[oscar-Vostro-3550:06740] [ 1]
/lib/x86_64-linux-gnu/libc.so.6(cfree+0x1c) [0x7f49ee26f54c]
[oscar-Vostro-3550:06740] [ 2] ./exe() [0x406742]
[oscar-Vostro-3550:06740] [ 3] ./exe(main+0x34) [0x406ac9]
[oscar-Vostro-3550:06740] [ 4]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) [0x7f49ee20d76d]
[oscar-Vostro-3550:06742] [ 0]
/lib/x86_64-linux-gnu/libc.so.6(+0x364a0) [0x7f6877fdc4a0]
[oscar-Vostro-3550:06742] [ 1]
/lib/x86_64-linux-gnu/libc.so.6(cfree+0x1c) [0x7f687802954c]
[oscar-Vostro-3550:06742] [ 2] ./exe() [0x406742]
[oscar-Vostro-3550:06742] [ 3] ./exe(main+0x34) [0x406ac9]
[oscar-Vostro-3550:06742] [ 4]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) [0x7f6877fc776d]
[oscar-Vostro-3550:06742] [ 5] ./exe() [0x401399]
[oscar-Vostro-3550:06742] *** End of error message ***
[oscar-Vostro-3550:06740] [ 5] ./exe() [0x401399]
[oscar-Vostro-3550:06740] *** End of error message ***
[oscar-Vostro-3550:06741] [ 0]
/lib/x86_64-linux-gnu/libc.so.6(+0x364a0) [0x7fa6c4c6e4a0]
[oscar-Vostro-3550:06741] [ 1]
/lib/x86_64-linux-gnu/libc.so.6(cfree+0x1c) [0x7fa6c4cbb54c]
[oscar-Vostro-3550:06741] [ 2] ./exe() [0x406742]
[oscar-Vostro-3550:06741] [ 3] ./exe(main+0x34) [0x406ac9]
[oscar-Vostro-3550:06741] [ 4]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) [0x7fa6c4c5976d]
[oscar-Vostro-3550:06741] [ 5] ./exe() [0x401399]
[oscar-Vostro-3550:06741] *** End of error message ***
--------------------------------------------------------------------------
mpirun noticed that process rank 0 with PID 6917 on node
oscar-Vostro-3550 exited on signal 11 (Segmentation fault).
--------------------------------------------------------------------------
2 total processes killed (some possibly by mpirun during cleanup)
If there is a segmentation fault in no case it must work .
I checked the program and didn't find the error. Why does the
program work with five temperatures?
Could someone help me to find the error and answer my question please.
The program and the necessary files to run it are attached
Thanks
_Oscar Fabian Mojica Ladino_
Geologist M.S. in Geophysics
_______________________________________________
users mailing list
us...@open-mpi.org <mailto:us...@open-mpi.org>
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
