The selection of cm is not wrong per se. You will find that the psm mtl is much better than the openib btl for QLogic harware.
-Nathan On Mon, 19 Mar 2012, Jens Glaser wrote:
Hello, I am using the latest trunk version of OMPI, in order to take advantage of the new CUDA RDMA features (smcuda BTL). RDMA support is superb, however, I have to give a manual parameter mpirun --mca pml ob1 ... to have the OB1 upper layer selected and, consequently, to get smcuda activated. Otherwise mpirun chooses the cm upper layer, which is wrong. The hardware is a InfiniBand: QLogic Corp. IBA7322 QDR InfiniBand HCA (rev 02). This is the output of mpirun - mca pml_base_verbose 100 [cas002:05518] select: component cm selected [cas002:05518] mca: base: close: component v closed [cas002:05518] mca: base: close: unloading component v [cas002:05518] mca: base: close: component bfo closed [cas002:05518] mca: base: close: unloading component bfo [cas002:05518] mca: base: close: component csum closed [cas002:05518] mca: base: close: unloading component csum [cas002:05518] mca: base: close: component dr closed [cas002:05518] mca: base: close: unloading component dr [cas002:05518] mca: base: close: component ob1 closed [cas002:05518] mca: base: close: unloading component ob1 [cas002:05520] mca: base: components_open: component cm open function successful [cas002:05520] mca: base: components_open: found loaded component csum [cas002:05520] mca: base: components_open: component csum has no register function [cas002:05520] mca: base: components_open: component csum open function successful [cas002:05520] mca: base: components_open: found loaded component dr [cas002:05520] mca: base: components_open: component dr has no register function [cas002:05520] mca: base: components_open: component dr open function successful [cas002:05520] mca: base: components_open: found loaded component ob1 [cas002:05520] mca: base: components_open: component ob1 has no register function [cas002:05520] mca: base: components_open: component ob1 open function successful [cas002:05520] select: component v not in the include list [cas002:05520] select: component bfo not in the include list [cas002:05520] select: initializing pml component cm [cas002:05520] select: init returned priority 30 [cas002:05520] select: component csum not in the include list [cas002:05520] select: component dr not in the include list [cas002:05520] select: initializing pml component ob1 [cas002:05520] select: init returned failure for component ob1 [cas002:05520] selected cm best priority 30 [cas002:05520] select: component cm selected [cas002:05520] mca: base: close: component v closed [cas002:05520] mca: base: close: unloading component v [cas002:05520] mca: base: close: component bfo closed [cas002:05520] mca: base: close: unloading component bfo [cas002:05520] mca: base: close: component csum closed [cas002:05520] mca: base: close: unloading component csum [cas002:05520] mca: base: close: component dr closed [cas002:05520] mca: base: close: unloading component dr [cas002:05520] mca: base: close: component ob1 closed [cas002:05520] mca: base: close: unloading component ob1 [cas002:05518] check:select: checking my pml cm against rank=0 pml cm [cas002:05517] check:select: rank=0 [cas002:05520] check:select: checking my pml cm against rank=0 pml cm [cas002:05519] check:select: checking my pml cm against rank=0 pml cm Configure options: ./configure --with-openib --with-cuda --prefix=/home/it1/glaser/local --with-tm=/opt/torque --enable-shared Does anyone have any idea what causes openmpi to select cm by default? Thanks, Jens. _______________________________________________ users mailing list us...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/users
