Hello Ralph, hello all, Two news, as usual a good and a bad one.
The good: we believe to find out *why* it hangsThe bad: it seem for me, this is a bug or at least undocumented feature of Open MPI /1.5.x.
In detail:As said, we see mystery hang-ups if starting on some nodes using some permutation of hostnames. Usually removing "some bad" nodes helps, sometimes a permutation of node names in the hostfile is enough(!). The behaviour is reproducible.
The machines have at least 2 networks:*eth0* is used for installation, monitoring, ... - this ethernet is very slim
*ib0* - is the "IP over IB" interface and is used for everything: the file systems, ssh and so on. The hostnames are bound to the ib0 network; our idea was not to use eth0 for MPI at all.
all machines are available from any over ib0 (are in one network).But on eth0 there are at least two different networks; especially the computer linuxbsc025 is in different network than the others and is not reachable from other nodes over eth0! (but reachable over ib0. The name used in the hostfile is resolved to the IP of ib0 ).
So I believe that Open MPI /1.5.x tries to communicate over eth0 and cannot do it, and hangs. The /1.4.3 does not hang, so this issue is 1.5.x-specific (seen in 1.5.3 and 1.5.4). A bug?
I also tried to disable the eth0 completely: $ mpiexec -mca btl_tcp_if_exclude eth0,lo -mca btl_tcp_if_include ib0 ......but this does not help. All right, the above command should disable the usage of eth0 for MPI communication itself, but it hangs just before the MPI is started, isn't it? (because one process lacks, the MPI_INIT cannot be passed)
Now a question: is there a way to forbid the mpiexec to use some interfaces at all?
Best wishes, Paul KapinosP.S. Of course we know about the good idea to bring all nodes into the same net on eth0, but at this point it is impossible due of technical reason[s]...
P.S.2 I'm not sure that the issue is really rooted in the above mentioned misconfiguration of eth0, but I have no better idea at this point...
The map seem to be correctly build, also the output if the daemons seem to be the same (see helloworld.txt)Unfortunately, it appears that OMPI was not built with --enable-debug as there is no debug info in the output. Without a debug installation of OMPI, the ability to determine the problem is pretty limited.
well, this will be the next option we will activate. We also have another issue here, on (not) using uDAPL..
You should also try putting that long list of nodes in a hostfile - see if that makes a difference. It will process the nodes thru a different code path, so if there is some problem in --host, this will tell us.No, with the host file instead of host list on command line the behaviour is the same. But, I just found out that the 1.4.3 does *not* hang on this constellation. The next thing I will try will be the installation of 1.5.4 :o) Best, Paul P.S. started: $ /opt/MPI/openmpi-1.5.3/linux/intel/bin/mpiexec --hostfile hostfile-mini -mca odls_base_verbose 5 --leave-session-attached --display-map helloworld 2>&1 | tee helloworld.txtOn Nov 21, 2011, at 9:33 AM, Paul Kapinos wrote:Hello Open MPI volks, We use OpenMPI 1.5.3 on our pretty new 1800+ nodes InfiniBand cluster, and we have some strange hangups if starting OpenMPI processes. The nodes are named linuxbsc001,linuxbsc002,... (with some lacuna due of offline nodes). Each node is accessible from each other over SSH (without password), also MPI programs between any two nodes are checked to run. So long, I tried to start some bigger number of processes, one process per node: $ mpiexec -np NN --host linuxbsc001,linuxbsc002,... MPI_FastTest.exe Now the problem: there are some constellations of names in the host list on which mpiexec reproducible hangs forever; and more surprising: other *permutation* of the *same* node names may run without any errors! Example: the command in laueft.txt runs OK, the command in haengt.txt hangs. Note: the only difference is that the node linuxbsc025 is put on the end of the host list. Amazed, too? Looking on the particular nodes during the above mpiexec hangs, we found the orted daemons started on *each* node and the binary on all but one node (orted.txt, MPI_FastTest.txt). Again amazing that the node with no user process started (leading to hangup in MPI_Init of all processes and thus to hangup, I believe) was always the same, linuxbsc005, which is NOT the permuted item linuxbsc025... This behaviour is reproducible. The hang-on only occure if the started application is a MPI application ("hostname" does not hang). Any Idea what is gonna on? Best, Paul Kapinos P.S: no alias names used, all names are real ones -- Dipl.-Inform. Paul Kapinos - High Performance Computing, RWTH Aachen University, Center for Computing and Communication Seffenter Weg 23, D 52074 Aachen (Germany) Tel: +49 241/80-24915 linuxbsc001: STDOUT: 24323 ? SLl 0:00 MPI_FastTest.exe linuxbsc002: STDOUT: 2142 ? SLl 0:00 MPI_FastTest.exe linuxbsc003: STDOUT: 69266 ? SLl 0:00 MPI_FastTest.exe linuxbsc004: STDOUT: 58899 ? SLl 0:00 MPI_FastTest.exe linuxbsc006: STDOUT: 68255 ? SLl 0:00 MPI_FastTest.exe linuxbsc007: STDOUT: 62026 ? SLl 0:00 MPI_FastTest.exe linuxbsc008: STDOUT: 54221 ? SLl 0:00 MPI_FastTest.exe linuxbsc009: STDOUT: 55482 ? SLl 0:00 MPI_FastTest.exe linuxbsc010: STDOUT: 59380 ? SLl 0:00 MPI_FastTest.exe linuxbsc011: STDOUT: 58312 ? SLl 0:00 MPI_FastTest.exe linuxbsc014: STDOUT: 56013 ? SLl 0:00 MPI_FastTest.exe linuxbsc016: STDOUT: 58563 ? SLl 0:00 MPI_FastTest.exe linuxbsc017: STDOUT: 54693 ? SLl 0:00 MPI_FastTest.exe linuxbsc018: STDOUT: 54187 ? SLl 0:00 MPI_FastTest.exe linuxbsc020: STDOUT: 55811 ? SLl 0:00 MPI_FastTest.exe linuxbsc021: STDOUT: 54982 ? SLl 0:00 MPI_FastTest.exe linuxbsc022: STDOUT: 50032 ? SLl 0:00 MPI_FastTest.exe linuxbsc023: STDOUT: 54044 ? SLl 0:00 MPI_FastTest.exe linuxbsc024: STDOUT: 51247 ? SLl 0:00 MPI_FastTest.exe linuxbsc025: STDOUT: 18575 ? SLl 0:00 MPI_FastTest.exe linuxbsc027: STDOUT: 48969 ? SLl 0:00 MPI_FastTest.exe linuxbsc028: STDOUT: 52397 ? SLl 0:00 MPI_FastTest.exe linuxbsc029: STDOUT: 52780 ? SLl 0:00 MPI_FastTest.exe linuxbsc030: STDOUT: 47537 ? SLl 0:00 MPI_FastTest.exe linuxbsc031: STDOUT: 54609 ? SLl 0:00 MPI_FastTest.exe linuxbsc032: STDOUT: 52833 ? SLl 0:00 MPI_FastTest.exe $ timex /opt/MPI/openmpi-1.5.3/linux/intel/bin/mpiexec -np 27 --host linuxbsc001,linuxbsc002,linuxbsc003,linuxbsc004,linuxbsc005,linuxbsc006,linuxbsc007,linuxbsc008,linuxbsc009,linuxbsc010,linuxbsc011,linuxbsc014,linuxbsc016,linuxbsc017,linuxbsc018,linuxbsc020,linuxbsc021,linuxbsc022,linuxbsc023,linuxbsc024,linuxbsc025,linuxbsc027,linuxbsc028,linuxbsc029,linuxbsc030,linuxbsc031,linuxbsc032 MPI_FastTest.exe $ timex /opt/MPI/openmpi-1.5.3/linux/intel/bin/mpiexec -np 27 --host linuxbsc001,linuxbsc002,linuxbsc003,linuxbsc004,linuxbsc005,linuxbsc006,linuxbsc007,linuxbsc008,linuxbsc009,linuxbsc010,linuxbsc011,linuxbsc014,linuxbsc016,linuxbsc017,linuxbsc018,linuxbsc020,linuxbsc021,linuxbsc022,linuxbsc023,linuxbsc024,linuxbsc027,linuxbsc028,linuxbsc029,linuxbsc030,linuxbsc031,linuxbsc032,linuxbsc025 MPI_FastTest.exe linuxbsc001: STDOUT: 24322 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 1 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc002: STDOUT: 2141 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 2 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc003: STDOUT: 69265 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 3 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc004: STDOUT: 58898 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 4 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc005: STDOUT: 65642 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 5 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc006: STDOUT: 68254 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 6 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc007: STDOUT: 62025 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 7 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc008: STDOUT: 54220 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 8 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc009: STDOUT: 55481 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 9 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc010: STDOUT: 59379 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 10 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc011: STDOUT: 58311 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 11 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc014: STDOUT: 56012 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 12 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc016: STDOUT: 58562 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 13 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc017: STDOUT: 54692 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 14 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc018: STDOUT: 54186 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 15 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc020: STDOUT: 55810 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 16 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc021: STDOUT: 54981 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 17 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc022: STDOUT: 50031 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 18 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc023: STDOUT: 54043 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 19 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc024: STDOUT: 51246 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 20 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc025: STDOUT: 18574 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 21 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc027: STDOUT: 48968 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 22 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc028: STDOUT: 52396 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 23 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc029: STDOUT: 52779 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 24 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc030: STDOUT: 47536 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 25 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc031: STDOUT: 54608 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 26 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh linuxbsc032: STDOUT: 52832 ? Ss 0:00 /opt/MPI/openmpi-1.5.3/linux/intel/bin/orted --daemonize -mca ess env -mca orte_ess_jobid 751435776 -mca orte_ess_vpid 27 -mca orte_ess_num_procs 28 --hnp-uri 751435776.0;tcp://134.61.194.2:33210 -mca plm rsh _______________________________________________ users mailing list us...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/users_______________________________________________ users mailing list us...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/users-- Dipl.-Inform. Paul Kapinos - High Performance Computing, RWTH Aachen University, Center for Computing and Communication Seffenter Weg 23, D 52074 Aachen (Germany) Tel: +49 241/80-24915 linuxbsc005 slots=1 linuxbsc006 slots=1 linuxbsc007 slots=1 linuxbsc008 slots=1 linuxbsc009 slots=1 linuxbsc010 slots=1 linuxbsc011 slots=1 linuxbsc014 slots=1 linuxbsc016 slots=1 linuxbsc017 slots=1 linuxbsc018 slots=1 linuxbsc020 slots=1 linuxbsc021 slots=1 linuxbsc022 slots=1 linuxbsc023 slots=1 linuxbsc024 slots=1 linuxbsc025 slots=1[linuxc2.rz.RWTH-Aachen.DE:22229] mca:base:select:( odls) Querying component [default] [linuxc2.rz.RWTH-Aachen.DE:22229] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxc2.rz.RWTH-Aachen.DE:22229] mca:base:select:( odls) Selected component [default] ======================== JOB MAP ======================== Data for node: linuxbsc005 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 0 Data for node: linuxbsc006 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 1 Data for node: linuxbsc007 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 2 Data for node: linuxbsc008 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 3 Data for node: linuxbsc009 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 4 Data for node: linuxbsc010 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 5 Data for node: linuxbsc011 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 6 Data for node: linuxbsc014 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 7 Data for node: linuxbsc016 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 8 Data for node: linuxbsc017 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 9 Data for node: linuxbsc018 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 10 Data for node: linuxbsc020 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 11 Data for node: linuxbsc021 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 12 Data for node: linuxbsc022 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 13 Data for node: linuxbsc023 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 14 Data for node: linuxbsc024 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 15 Data for node: linuxbsc025 Num procs: 1 Process OMPI jobid: [87,1] Process rank: 16 ============================================================= [linuxbsc007.rz.RWTH-Aachen.DE:07574] mca:base:select:( odls) Querying component [default] [linuxbsc007.rz.RWTH-Aachen.DE:07574] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc007.rz.RWTH-Aachen.DE:07574] mca:base:select:( odls) Selected component [default] [linuxbsc016.rz.RWTH-Aachen.DE:03146] mca:base:select:( odls) Querying component [default] [linuxbsc016.rz.RWTH-Aachen.DE:03146] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc016.rz.RWTH-Aachen.DE:03146] mca:base:select:( odls) Selected component [default] [linuxbsc005.rz.RWTH-Aachen.DE:22051] mca:base:select:( odls) Querying component [default] [linuxbsc005.rz.RWTH-Aachen.DE:22051] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc005.rz.RWTH-Aachen.DE:22051] mca:base:select:( odls) Selected component [default] [linuxbsc011.rz.RWTH-Aachen.DE:07131] mca:base:select:( odls) Querying component [default] [linuxbsc011.rz.RWTH-Aachen.DE:07131] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc011.rz.RWTH-Aachen.DE:07131] mca:base:select:( odls) Selected component [default] [linuxbsc025.rz.RWTH-Aachen.DE:43153] mca:base:select:( odls) Querying component [default] [linuxbsc025.rz.RWTH-Aachen.DE:43153] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc025.rz.RWTH-Aachen.DE:43153] mca:base:select:( odls) Selected component [default] [linuxbsc017.rz.RWTH-Aachen.DE:05044] mca:base:select:( odls) Querying component [default] [linuxbsc017.rz.RWTH-Aachen.DE:05044] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc017.rz.RWTH-Aachen.DE:05044] mca:base:select:( odls) Selected component [default] [linuxbsc018.rz.RWTH-Aachen.DE:01840] mca:base:select:( odls) Querying component [default] [linuxbsc018.rz.RWTH-Aachen.DE:01840] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc018.rz.RWTH-Aachen.DE:01840] mca:base:select:( odls) Selected component [default] [linuxbsc024.rz.RWTH-Aachen.DE:79549] mca:base:select:( odls) Querying component [default] [linuxbsc024.rz.RWTH-Aachen.DE:79549] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc024.rz.RWTH-Aachen.DE:79549] mca:base:select:( odls) Selected component [default] [linuxbsc022.rz.RWTH-Aachen.DE:73501] mca:base:select:( odls) Querying component [default] [linuxbsc022.rz.RWTH-Aachen.DE:73501] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc022.rz.RWTH-Aachen.DE:73501] mca:base:select:( odls) Selected component [default] [linuxbsc023.rz.RWTH-Aachen.DE:03364] mca:base:select:( odls) Querying component [default] [linuxbsc023.rz.RWTH-Aachen.DE:03364] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc023.rz.RWTH-Aachen.DE:03364] mca:base:select:( odls) Selected component [default] [linuxbsc006.rz.RWTH-Aachen.DE:16811] mca:base:select:( odls) Querying component [default] [linuxbsc006.rz.RWTH-Aachen.DE:16811] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc006.rz.RWTH-Aachen.DE:16811] mca:base:select:( odls) Selected component [default] [linuxbsc014.rz.RWTH-Aachen.DE:10206] mca:base:select:( odls) Querying component [default] [linuxbsc014.rz.RWTH-Aachen.DE:10206] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc014.rz.RWTH-Aachen.DE:10206] mca:base:select:( odls) Selected component [default] [linuxbsc008.rz.RWTH-Aachen.DE:00858] mca:base:select:( odls) Querying component [default] [linuxbsc008.rz.RWTH-Aachen.DE:00858] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc008.rz.RWTH-Aachen.DE:00858] mca:base:select:( odls) Selected component [default] [linuxbsc010.rz.RWTH-Aachen.DE:09727] mca:base:select:( odls) Querying component [default] [linuxbsc010.rz.RWTH-Aachen.DE:09727] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc010.rz.RWTH-Aachen.DE:09727] mca:base:select:( odls) Selected component [default] [linuxbsc020.rz.RWTH-Aachen.DE:06680] mca:base:select:( odls) Querying component [default] [linuxbsc020.rz.RWTH-Aachen.DE:06680] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc020.rz.RWTH-Aachen.DE:06680] mca:base:select:( odls) Selected component [default] [linuxbsc009.rz.RWTH-Aachen.DE:05145] mca:base:select:( odls) Querying component [default] [linuxbsc009.rz.RWTH-Aachen.DE:05145] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc009.rz.RWTH-Aachen.DE:05145] mca:base:select:( odls) Selected component [default] [linuxbsc021.rz.RWTH-Aachen.DE:01405] mca:base:select:( odls) Querying component [default] [linuxbsc021.rz.RWTH-Aachen.DE:01405] mca:base:select:( odls) Query of component [default] set priority to 1 [linuxbsc021.rz.RWTH-Aachen.DE:01405] mca:base:select:( odls) Selected component [default] _______________________________________________ users mailing list us...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/users_______________________________________________ users mailing list us...@open-mpi.org http://www.open-mpi.org/mailman/listinfo.cgi/users
-- Dipl.-Inform. Paul Kapinos - High Performance Computing, RWTH Aachen University, Center for Computing and Communication Seffenter Weg 23, D 52074 Aachen (Germany) Tel: +49 241/80-24915
smime.p7s
Description: S/MIME Cryptographic Signature
