Hi,
I think I've seen this before.
I can't speak to the details surrounding this issue, but when I upgraded to the
newest version of libtool, the problem went away <shrug>.
Take a look at "Use of GNU m4, Autoconf, Automake, and Libtool" in our HACKING
file. libtool-2.4.2.tar.gz **should** work, if that's the problem that you are
experiencing.
I would suggest starting with a fresh source tree, before you try again.
Hope that helps,
Samuel K. Gutierrez
Los Alamos National Laboratory
On Nov 8, 2011, at 2:06 PM, Gustavo Correa wrote:
> Dear OpenMPI pros
>
> When I try to build OpenMPI 1.4.4 with PGI compilers 11.7 [pgcc, pgcc,
> pgfortran]
> I get the awkward error message on the bottom of this email.
>
> I say awkward because I assigned the value 'shanghai-64' to the '-tp' flag,
> as you can see from the successful 'libtool:compile' command in the error
> message.
> However, the subsequent 'libtool:link' command has '-tp' without a value.
> Note that the remaining flags '-fast -Mfprelaxed' were also dropped in the
> libtool:link command.
> The 'partial' flag '-tp' is worse than no flag at all, and the pgcc compiler
> fails.
>
> By contrast, OpenMPI 1.4.3 builds just fine with the same compilers and
> the same compiler flags.
>
> Is this the revival of an old idiosyncrasy between libtool and PGI?
> Could perhaps the OMPI 1.4.4. configure script have stripped off my compiler
> flags after '-tp',
> when passing it to libtool in link mode? [Somehow it works in 1.4.3.]
> Is there any workaround or patch?
>
>
> Many thanks,
> Gus Correa
>
> ******
>
> More details:
> CentOS Linux 5.2 x86_64, libtool 1.5.22, PGI 11.7.
>
> Configure parameters:
> export CC=pgcc
> export CXX=pgcpp
> export F77='pgfortran'
> export FC=${F77}
>
> export CFLAGS='-tp shanghai-64 -fast -Mfprelaxed'
> export CXXFLAGS=${CFLAGS}
> export FFLAGS=${CFLAGS}
> export FCFLAGS=${FFLAGS}
>
> ../configure \
> --prefix=${MYINSTALLDIR} \
> --with-libnuma=/usr \
> --with-tm=/opt/torque/2.4.11/gnu-4.1.2 \
> --with-openib=/usr \
> --enable-static \
> 2>&1 | tee configure_${build_id}.log
>
> ****
>
> #################### ERROR MESSAGE ###########################
>
> libtool: compile: pgcc -DHAVE_CONFIG_H -I.
> -I../../../../../opal/mca/memory/ptmalloc2 -I../../../../opal/include
> -I../../../../orte/include -I../../../../ompi/include
> -I../../../../opal/mca/paffinity/linux/plpa/src/libplpa -DMALLOC_DEBUG=0
> -D_GNU_SOURCE=1 -DUSE_TSD_DATA_HACK=1 -DMALLOC_HOOKS=1
> -I../../../../../opal/mca/memory/ptmalloc2/sysdeps/pthread
> -I../../../../../opal/mca/memory/ptmalloc2/sysdeps/generic -I../../../../..
> -I../../../.. -I../../../../../opal/include -I../../../../../orte/include
> -I../../../../../ompi/include -D_REENTRANT -DNDEBUG -tp shanghai-64 -fast
> -Mfprelaxed -c ../../../../../opal/mca/memory/ptmalloc2/dummy.c -o dummy.o
> >/dev/null 2>&1
> /bin/sh ../../../../libtool --tag=CC --mode=link pgcc -DNDEBUG -tp
> shanghai-64 -fast -Mfprelaxed -export-dynamic -o libopenmpi_malloc.la
> -rpath /home/sw/openmpi/1.4.4/pgi-11.7/lib dummy.lo -lnsl -lutil
> libtool: link: pgcc -shared -fpic -DPIC .libs/dummy.o -lnsl -lutil -lc
> -tp -Wl,-soname -Wl,libopenmpi_malloc.so.0 -o
> .libs/libopenmpi_malloc.so.0.0.0
> pgcc-Fatal-Switch -tp must have a value
> -tp=amd64|amd64e|athlon|athlonxp|barcelona|barcelona-32|barcelona-64|core2|core2-32|core2-64|istanbul|istanbul-32|istanbul-64|k7|k8|k8-32|k8-64|k8-64e|nehalem|nehalem-32|nehalem-64|p5|p6|p7|p7-32|p7-64|penryn|penryn-32|penryn-64|piii|piv|px|px-32|px-64|sandybridge|sandybridge-32|sandybridge-64|shanghai|shanghai-32|shanghai-64|x64
> Choose target processor type
> amd64 Same as -tp k8-64
> amd64e Same as -tp k8-64e
> athlon AMD 32-bit Athlon Processor
> athlonxp AMD 32-bit Athlon XP Processor
> barcelona AMD Barcelona processor
> barcelona-32 AMD Barcelona processor, 32-bit mode
> barcelona-64 AMD Barcelona processor, 64-bit mode
> core2 Intel Core-2 Architecture
> core2-32 Intel Core-2 Architecture, 32-bit mode
> core2-64 Intel Core-2 Architecture, 64-bit mode
> istanbul AMD Istanbul processor
> istanbul-32 AMD Istanbul processor, 32-bit mode
> istanbul-64 AMD Istanbul processor, 64-bit mode
> k7 AMD Athlon Processor
> k8 AMD64 Processor
> k8-32 AMD64 Processor 32-bit mode
> k8-64 AMD64 Processor 64-bit mode
> k8-64e AMD64 Processor rev E or later, 64-bit mode
> nehalem Intel Nehalem processor
> nehalem-32 Intel Nehalem processor, 32-bit mode
> nehalem-64 Intel Nehalem processor, 64-bit mode
> p5 Intel P5 Pentium Architecture
> p6 Intel P6 Architecture (Pentium Pro, II, III)
> p7 Intel P7 Architecture (Pentium 4, Xeon, Centrino)
> p7-32 Intel P7 Architecture (Pentium 4, Xeon, Centrino)
> p7-64 Intel P7 Architecture with EM64T, 64-bit mode
> penryn Intel Penryn Architecture
> penryn-32 Intel Penryn Architecture, 32-bit mode
> penryn-64 Intel Penryn Architecture, 64-bit mode
> piii Intel Pentium III
> piv Intel Pentium 4
> px Generic x86 Processor
> px-32 Generic x86 Processor, 32-bit mode
> px-64 Generic x86-64 architecture
> sandybridge Intel SandyBridge processor
> sandybridge-32 Intel SandyBridge processor, 32-bit mode
> sandybridge-64 Intel SandyBridge processor, 64-bit mode
> shanghai AMD Shanghai processor
> shanghai-32 AMD Shanghai processor, 32-bit mode
> shanghai-64 AMD Shanghai processor, 64-bit mode
> x64 Unified AMD/Intel 64-bit mode
> make[2]: *** [libopenmpi_malloc.la] Error 2
> make[2]: Leaving directory
> `/home/swinst/openmpi/1.4.4/openmpi-1.4.4/build_pgi-11.7/opal/mca/memory/ptmalloc2'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory
> `/home/swinst/openmpi/1.4.4/openmpi-1.4.4/build_pgi-11.7/opal'
> make: *** [all-recursive] Error 1
>
>
> _______________________________________________
> users mailing list
> us...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/users
