You can try running it as suggested here: http://www.open-mpi.org/faq/?category=running#mpirun-prefix
On Mar 14, 2011, at 12:21 PM, Federico Golfrè Andreasi wrote: > > Thank you Jeff, > > my fault :( I didn't find that a link of that file was also mentioned in the > website page. > I was able to build from the trunk the revision 24472. > But when I try to run my program I still receive the error that Ralph told me > is dued to version mismacth. > > How can I check which openmpi version my program is running in the remore > shell ? > > I execute my programs using the command > /home/fandreasi/openmpi-trunk/bin/mpiexec -hostfile ./hostfile -n 12 ./my_bin > And in my .cshrc I've the instruction: > setenv LD_LIBRARY_PATH > /home/fandreasi/openmpi-trunk/lib:/home/fandreasi/openmpi-trunk/lib/openmpi > > thank you again ! > Federico > > > > > > 2011/3/10 Jeff Squyres <jsquy...@cisco.com> > This usually means you didn't install the GNU auto tools properly. > > Check the HACKING file in the top-level directory for specific instructions > on how to install the Autotools. > > > On Mar 10, 2011, at 7:50 AM, Federico Golfrè Andreasi wrote: > > > > > Hi Ralph, > > > > I did a chekout of the 22794 revision with svn. > > I've download and installed (with the default configuration) in my /home > > folder: > > - m4 version 1.4.16 > > - autoconf version 2.68 > > - automake version 1.11 > > - libtool version 2.2.6b > > I've modifyed my CSHRC to export the following: > > setenv PATH > > /home/fandreasi/m4-1.4.16/bin:/home/fandreasi/autoconf-2.68/bin:/home/fandreasi/automake-1.11/bin:/home/fandreasi/libtool-2.2.6b/bin:$PATH > > setenv LD_LIBRARY_PATH /home/fandreasi/libtool-2.2.6b/lib > > > > When I do the autogen it return me the error I've attached. > > Can you help me on this ? > > > > Thank you, > > Federico. > > > > > > > > > > > > > > > > Il giorno 05 marzo 2011 19:05, Ralph Castain <r...@open-mpi.org> ha scritto: > > Hi Federico > > > > I tested the trunk today and it works fine for me - I let it spin for 1000 > > cycles without issue. My test program is essentially identical to what you > > describe - you can see it in the orte/test/mpi directory. The "master" is > > loop_spawn.c, and the "slave" is loop_child.c. I only tested it on a single > > machine, though - will have to test multi-machine later. You might see if > > that makes a difference. > > > > The error you report in your attachment is a classic symptom of mismatched > > versions. Remember, we don't forward your ld_lib_path, so it has to be > > correct on your remote machine. > > > > As for r22794 - we don't keep anything that old on our web site. If you > > want to build it, the best way to get the code is to do a subversion > > checkout of the developer's trunk at that revision level: > > > > svn co -r 22794 http://svn.open-mpi.org/svn/ompi/trunk > > > > Remember to run autogen before configure. > > > > > > On Mar 4, 2011, at 4:43 AM, Federico Golfrè Andreasi wrote: > > > >> > >> Hi Ralph, > >> > >> I'm getting stuck with spawning stuff, > >> > >> I've downloaded the snapshot from the trunk of 1st of March > >> (openmpi-1.7a1r24472.tar.bz2), > >> I'm testing using a small program that does the following: > >> - master program starts and each rank prints his hostsname > >> - master program spawn a slave program with the same size > >> - each rank of the slave (spawned) program prints his hostname > >> - end > >> Not always he is able to complete the progam run, two different behaviour: > >> 1. not all the slave print their hostname and the program ends suddenly > >> 2. both program ends correctly but orted demon is still alive and I need > >> to press crtl-c to exit > >> > >> > >> I've tryed to recompile my test program with a previous snapshot > >> (openmpi-1.7a1r22794.tar.bz2) > >> where I have only the compiled version of OpenMPI (in another machine). > >> It gives me an error before starting (I've attacehd) > >> Surfing on the FAQ I found some tip and I verified to compile the program > >> with the correct OpenMPI version, > >> that the LD_LIBRARY_PATH is consistent. > >> So I would like to re-compile the openmpi-1.7a1r22794.tar.bz2 but where > >> can I found it ? > >> > >> > >> Thank you, > >> Federico > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> Il giorno 23 febbraio 2011 03:43, Ralph Castain <rhc.open...@gmail.com> ha > >> scritto: > >> Apparently not. I will investigate when I return from vacation next week. > >> > >> > >> Sent from my iPad > >> > >> On Feb 22, 2011, at 12:42 AM, Federico Golfrè Andreasi > >> <federico.gol...@gmail.com> wrote: > >> > >>> Hi Ralf, > >>> > >>> I've tested spawning with the OpenMPI 1.5 release but that fix is not > >>> there. > >>> Are you sure you've added it ? > >>> > >>> Thank you, > >>> Federico > >>> > >>> > >>> > >>> 2010/10/19 Ralph Castain <r...@open-mpi.org> > >>> The fix should be there - just didn't get mentioned. > >>> > >>> Let me know if it isn't and I'll ensure it is in the next one...but I'd > >>> be very surprised if it isn't already in there. > >>> > >>> > >>> On Oct 19, 2010, at 3:03 AM, Federico Golfrè Andreasi wrote: > >>> > >>>> Hi Ralf ! > >>>> > >>>> I saw that the new realease 1.5 is out. > >>>> I didn't found this fix in the "list of changes", is it present but not > >>>> mentioned since is a minor fix ? > >>>> > >>>> Thank you, > >>>> Federico > >>>> > >>>> > >>>> > >>>> 2010/4/1 Ralph Castain <r...@open-mpi.org> > >>>> Hi there! > >>>> > >>>> It will be in the 1.5.0 release, but not 1.4.2 (couldn't backport the > >>>> fix). I understand that will come out sometime soon, but no firm date > >>>> has been set. > >>>> > >>>> > >>>> On Apr 1, 2010, at 4:05 AM, Federico Golfrè Andreasi wrote: > >>>> > >>>>> Hi Ralph, > >>>>> > >>>>> > >>>>> I've downloaded and tested the openmpi-1.7a1r22817 snapshot, > >>>>> and it works fine for (multiple) spawning more than 128 processes. > >>>>> > >>>>> That fix will be included in the next release of OpenMPI, right ? > >>>>> Do you when it will be released ? Or where I can find that info ? > >>>>> > >>>>> Thank you, > >>>>> Federico > >>>>> > >>>>> > >>>>> > >>>>> 2010/3/1 Ralph Castain <r...@open-mpi.org> > >>>>> http://www.open-mpi.org/nightly/trunk/ > >>>>> > >>>>> I'm not sure this patch will solve your problem, but it is worth a try. > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> _______________________________________________ > >>>>> users mailing list > >>>>> us...@open-mpi.org > >>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users > >>>> > >>>> > >>>> _______________________________________________ > >>>> users mailing list > >>>> us...@open-mpi.org > >>>> http://www.open-mpi.org/mailman/listinfo.cgi/users > >>>> > >>>> _______________________________________________ > >>>> users mailing list > >>>> us...@open-mpi.org > >>>> http://www.open-mpi.org/mailman/listinfo.cgi/users > >>> > >>> > >>> _______________________________________________ > >>> users mailing list > >>> us...@open-mpi.org > >>> http://www.open-mpi.org/mailman/listinfo.cgi/users > >>> > >> > >> <OpenMPI.error> > > > > > > <autogen.log>_______________________________________________ > > users mailing list > > us...@open-mpi.org > > http://www.open-mpi.org/mailman/listinfo.cgi/users > > > -- > Jeff Squyres > jsquy...@cisco.com > For corporate legal information go to: > http://www.cisco.com/web/about/doing_business/legal/cri/ > > > _______________________________________________ > users mailing list > us...@open-mpi.org > http://www.open-mpi.org/mailman/listinfo.cgi/users > > _______________________________________________ > users mailing list > us...@open-mpi.org > http://www.open-mpi.org/mailman/listinfo.cgi/users
