I can schedule it into the 1.5 series, but I don't think it will make 1.5.1
(too close to release). Have to ask...
On Dec 1, 2010, at 2:12 PM, Jesse Ziser wrote:
> Sorry, one more question: I don't completely understand the version
> numbering, but can/will this fix go into 1.5.1 at some point? I notice that
> the trunk is labeled as 1.7.
>
> Thanks again
>
> Jesse Ziser wrote:
>> It turned out I was using development version 1.5.0. After going back to
>> the release version, I found that there was another problem on my end, which
>> had nothing to do with OpenMPI. So thanks for the help; all is well. (And
>> sorry for the belated reply.)
>> Ralph Castain wrote:
>>> After digging around a little, I found that you must be using the OMPI
>>> devel trunk as no release version contains this code. I also looked to see
>>> why it was done, and found that the concern was with an inadvertent sigpipe
>>> that can occur internal to OMPI due to a race condition.
>>>
>>> So I modified the trunk a little. We will ignore the first few sigpipe
>>> errors we get, but will then abort with an appropriate error.
>>>
>>> HTH
>>> Ralph
>>>
>>> On Nov 24, 2010, at 5:08 PM, Jesse Ziser wrote:
>>>
>>>> Hello,
>>>>
>>>> I've noticed that OpenMPI does not seem to detect when something
>>>> downstream of it fails. Specifically, I think it does not handle SIGPIPE
>>>> or pass it down to its young, but it still prints an error message every
>>>> time it occurs.
>>>>
>>>> For example, running a command like this:
>>>>
>>>> mpirun -np 1 ./mpi-cat </dev/zero | dd bs=1 count=1 >/dev/null
>>>>
>>>> (where mpi-cat is just a simple program that initializes MPI and then
>>>> copies its input to its output) hangs after the dd quits, and produces an
>>>> eternity of repetitions of this error message:
>>>>
>>>> [[35845,0],0] reports a SIGPIPE error on fd 13
>>>>
>>>> I am unsure whether this is the intended behavior, but it certainly seems
>>>> unfortunate from my persepective. Is there any way to make it exit
>>>> nicely, preferably with a single error, whenever what it's trying to write
>>>> to doesn't exist anymore? I think I could even submit a patch to make it
>>>> quit on SIGPIPE, if it is agreed that that makes sense.
>>>>
>>>> Here's the source for my mpi-cat example:
>>>>
>>>> #include <stdio.h>
>>>>
>>>> #include <mpi.h>
>>>>
>>>> int main (int iArgC, char *apArgV [])
>>>> {
>>>> int iRank;
>>>>
>>>> MPI_Init (&iArgC, &apArgV);
>>>>
>>>> MPI_Comm_rank (MPI_COMM_WORLD, &iRank);
>>>>
>>>> if (iRank == 0)
>>>> {
>>>> while(1)
>>>> if(putchar(getchar()) < 0)
>>>> break;
>>>> }
>>>>
>>>> MPI_Finalize ();
>>>>
>>>> return (0);
>>>> }
>>>>
>>>>
>>>> Thank you,
>>>>
>>>> Jesse Ziser
>>>> Applied Research Laboratories:
>>>> The University of Texas at Austin
>>>> _______________________________________________
>>>> users mailing list
>>>> us...@open-mpi.org
>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>
>>>
>>> _______________________________________________
>>> users mailing list
>>> us...@open-mpi.org
>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>> _______________________________________________
>> users mailing list
>> us...@open-mpi.org
>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>
> _______________________________________________
> users mailing list
> us...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/users
