Hello Tushar,
After looking at the log files you attached it appears that there are multiple
issues.
[0,1,11]: Myrinet/GM on host wasatch-55 was unable to find any NICs.
Another transport will be used instead, although this may result in
lower performance.
Usually they occur if there is a mismatch in mpirun version and mca blt
selection. I suggest the following order to check if the job actually works on
a single node
#!/bin/sh
#PBS -V
#PBS -q wasatch
#PBS -N SWMF
#PBS -l nodes=2:ppn=8
# change to the run directory
#cd $SWMF_v2.3/run
cat `echo ${PBS_NODEFILE}` > list_of_nodes
mpirun -np 8 -machinefile list_of_nodes /home/A00945081/SWMF_v2.3/run/SWMF.exe
> run.log
Rangam
________________________________________
From: users-boun...@open-mpi.org [users-boun...@open-mpi.org] On Behalf Of
Tushar Andriyas [thugnomic...@gmail.com]
Sent: Friday, November 19, 2010 1:11 PM
To: Open MPI Users
Subject: Re: [OMPI users] Unable to find the following executable
Hey Rangam,
I tried out the batch script and the error file comes out empty and the output
file has /home/A00945081/SWM_v2.3/run/SWMF.exe (WHEN RUN ON A SINGLE MACHINE)
and the same with multiple machines in the run. So, does that mean that the exe
is auto mounted ? What should I do next?
Tushar
On Fri, Nov 19, 2010 at 10:05 AM, Addepalli, Srirangam V
<srirangam.v.addepa...@ttu.edu<mailto:srirangam.v.addepa...@ttu.edu>> wrote:
Hello Tushar,
Try the following script.
#!/bin/sh
#PBS -V
#PBS -q wasatch
#PBS -N SWMF
#PBS -l nodes=1:ppn=8
# change to the run directory
#cd $SWMF_v2.3/run
cat `echo ${PBS_NODEFILE}` > list_of_nodes
The objective is to check if your user directories are auto mounted on compute
nodes and are available during run time.
If the job returns information about SWMF.exe then it can be safely assumed
that user directories are being auto mounted.
Rangam
________________________________________
From: users-boun...@open-mpi.org<mailto:users-boun...@open-mpi.org>
[users-boun...@open-mpi.org<mailto:users-boun...@open-mpi.org>] On Behalf Of
Tushar Andriyas [thugnomic...@gmail.com<mailto:thugnomic...@gmail.com>]
Sent: Friday, November 19, 2010 8:35 AM
To: Open MPI Users
Subject: Re: [OMPI users] Unable to find the following executable
It just gives back the info on folders in my home directory. Dont get me wrong
but i m kinda new in this. So, could u type out d full command which i need to
give?
Tushar
On Thu, Nov 18, 2010 at 8:35 AM, Ralph Castain
<r...@open-mpi.org<mailto:r...@open-mpi.org><mailto:r...@open-mpi.org<mailto:r...@open-mpi.org>>>
wrote:
You can qsub a simple "ls" on that path - that will tell you if the path is
valid on all machines in that allocation.
What typically happens is that home directories aren't remotely mounted, or are
mounted on a different location.
On Thu, Nov 18, 2010 at 8:31 AM, Tushar Andriyas
<thugnomic...@gmail.com<mailto:thugnomic...@gmail.com><mailto:thugnomic...@gmail.com<mailto:thugnomic...@gmail.com>>>
wrote:
no its not in the same directory as SWMF. I guess the path is the same since
all the machines in a cluster are configured d same way. How do I know if this
is not the case?
On Thu, Nov 18, 2010 at 8:25 AM, Ralph Castain
<r...@open-mpi.org<mailto:r...@open-mpi.org><mailto:r...@open-mpi.org<mailto:r...@open-mpi.org>>>
wrote:
Is you "hello world" test program in the same directory as SWMF? Is it possible
that the path you are specifying is not available on all of the remote
machines? That's the most common problem we see.
On Thu, Nov 18, 2010 at 7:59 AM, Tushar Andriyas
<thugnomic...@gmail.com<mailto:thugnomic...@gmail.com><mailto:thugnomic...@gmail.com<mailto:thugnomic...@gmail.com>>>
wrote:
Hi there,
Thanks for the expedite reply. The thing is that although the mpirun is setup
correctly (since a simple hello world works), when I run the main SWMF.exe
executable, the cluster machines somehow fail to find the executable (SWMF.exe).
So, I have attached the sample error file from one of the runs (SWMF.e143438)
and also the MAKEFILES so that you could better gauge the problem. The
makefiles have Linux as the OS and pgf90 as compiler with mpif90 as the linker.
I am using openmpi-1.2.7-pgi. Job is submitted using a batch file (job.bats)
and the scheduler is Torque (version I am not sure but I can see three on the
machines viz 2.0.0, 2.2.1, 2.5.2).
I have also attached an error file from one of the clusters (WASATCH viz
SWMF.e143439) and UINTA (SWMF.e143440) with the whole path of the exe as
Srirangam mentioned as follows (in the batch file).
mpirun --prefix /opt/libraries/openmpi/openmpi-1.2.7-pgi
/home/A00945081/SWMF_v2.3/run/SWMF.exe > runlog_`date +%y%m%d%H%M`
I have tried both mpirun and mpiexec but nothing seems to work.
Tushar
On Wed, Nov 17, 2010 at 8:12 PM, Addepalli, Srirangam V
<srirangam.v.addepa...@ttu.edu<mailto:srirangam.v.addepa...@ttu.edu><mailto:srirangam.v.addepa...@ttu.edu<mailto:srirangam.v.addepa...@ttu.edu>>>
wrote:
Hello Tushar,
Have you tried supplying the full path of the executable just to check ?
Rangam
________________________________________
From:
users-boun...@open-mpi.org<mailto:users-boun...@open-mpi.org><mailto:users-boun...@open-mpi.org<mailto:users-boun...@open-mpi.org>>
[users-boun...@open-mpi.org<mailto:users-boun...@open-mpi.org><mailto:users-boun...@open-mpi.org<mailto:users-boun...@open-mpi.org>>]
On Behalf Of Tushar Andriyas
[thugnomic...@gmail.com<mailto:thugnomic...@gmail.com><mailto:thugnomic...@gmail.com<mailto:thugnomic...@gmail.com>>]
Sent: Wednesday, November 17, 2010 8:49 PM
To:
us...@open-mpi.org<mailto:us...@open-mpi.org><mailto:us...@open-mpi.org<mailto:us...@open-mpi.org>>
Subject: [OMPI users] Unable to find the following executable
Hi there,
I am new to using mpi commands and was stuck in problem with running a code.
When I submit my job through a batch file, the job exits with the message that
the executable could not be found on the machines. I have tried a lot of
options such as PBS -V and so on on but the problem persists. If someone is
interested, I can send the full info on the cluster, the compiler and openmpi
settings and other stuff. BTW the launcher is torque (which you might have
guessed). The code does not have a forum so I am in a deep mire.
Thanks,
Tushar
_______________________________________________
users mailing list
us...@open-mpi.org<mailto:us...@open-mpi.org><mailto:us...@open-mpi.org<mailto:us...@open-mpi.org>>
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org<mailto:us...@open-mpi.org><mailto:us...@open-mpi.org<mailto:us...@open-mpi.org>>
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org<mailto:us...@open-mpi.org><mailto:us...@open-mpi.org<mailto:us...@open-mpi.org>>
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org<mailto:us...@open-mpi.org><mailto:us...@open-mpi.org<mailto:us...@open-mpi.org>>
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org<mailto:us...@open-mpi.org><mailto:us...@open-mpi.org<mailto:us...@open-mpi.org>>
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org<mailto:us...@open-mpi.org>
http://www.open-mpi.org/mailman/listinfo.cgi/users
