Hi,
sorry, i just forgot to add the values of the function parameters:
(gdb) print reg->cbdata
$1 = (void *) 0x0
(gdb) print openib_btl->super
$2 = {btl_component = 0x2b341edd7380, btl_eager_limit = 12288,
btl_rndv_eager_limit = 12288, btl_max_send_size = 65536,
btl_rdma_pipeline_send_length = 1048576,
btl_rdma_pipeline_frag_size = 1048576, btl_min_rdma_pipeline_size = 1060864,
btl_exclusivity = 1024, btl_latency = 10, btl_bandwidth = 800, btl_flags = 310,
btl_add_procs = 0x2b341eb8ee47 <mca_btl_openib_add_procs>, btl_del_procs =
0x2b341eb90156 <mca_btl_openib_del_procs>, btl_register = 0, btl_finalize =
0x2b341eb93186 <mca_btl_openib_finalize>,
btl_alloc = 0x2b341eb90a3e <mca_btl_openib_alloc>, btl_free = 0x2b341eb91400
<mca_btl_openib_free>, btl_prepare_src = 0x2b341eb91813
<mca_btl_openib_prepare_src>,
btl_prepare_dst = 0x2b341eb91f2e <mca_btl_openib_prepare_dst>, btl_send =
0x2b341eb94517 <mca_btl_openib_send>, btl_sendi = 0x2b341eb9340d
<mca_btl_openib_sendi>,
btl_put = 0x2b341eb94660 <mca_btl_openib_put>, btl_get = 0x2b341eb94c4e
<mca_btl_openib_get>, btl_dump = 0x2b341acd45cb <mca_btl_base_dump>, btl_mpool
= 0xf3f4110,
btl_register_error = 0x2b341eb90565 <mca_btl_openib_register_error_cb>,
btl_ft_event = 0x2b341eb952e7 <mca_btl_openib_ft_event>}
(gdb) print hdr->tag
$3 = 0 '\0'
(gdb) print des
$4 = (mca_btl_base_descriptor_t *) 0xf4a6700
(gdb) print reg->cbfunc
$5 = (mca_btl_base_module_recv_cb_fn_t) 0
Eloi
On Tuesday 10 August 2010 16:04:08 Eloi Gaudry wrote:
> Hi,
>
> Here is the output of a core file generated during a segmentation fault
> observed during a collective call (using openib):
>
> #0 0x0000000000000000 in ?? ()
> (gdb) where
> #0 0x0000000000000000 in ?? ()
> #1 0x00002aedbc4e05f4 in btl_openib_handle_incoming
> (openib_btl=0x1902f9b0, ep=0x1908a1c0, frag=0x190d9700, byte_len=18) at
> btl_openib_component.c:2881 #2 0x00002aedbc4e25e2 in handle_wc
> (device=0x19024ac0, cq=0, wc=0x7ffff279ce90) at
> btl_openib_component.c:3178 #3 0x00002aedbc4e2e9d in poll_device
> (device=0x19024ac0, count=2) at btl_openib_component.c:3318 #4
> 0x00002aedbc4e34b8 in progress_one_device (device=0x19024ac0) at
> btl_openib_component.c:3426 #5 0x00002aedbc4e3561 in
> btl_openib_component_progress () at btl_openib_component.c:3451 #6
> 0x00002aedb8b22ab8 in opal_progress () at runtime/opal_progress.c:207 #7
> 0x00002aedb859f497 in opal_condition_wait (c=0x2aedb888ccc0,
> m=0x2aedb888cd20) at ../opal/threads/condition.h:99 #8 0x00002aedb859fa31
> in ompi_request_default_wait_all (count=2, requests=0x7ffff279d0e0,
> statuses=0x0) at request/req_wait.c:262 #9 0x00002aedbd7559ad in
> ompi_coll_tuned_allreduce_intra_recursivedoubling (sbuf=0x7ffff279d444,
> rbuf=0x7ffff279d440, count=1, dtype=0x6788220, op=0x6787a20,
> comm=0x19d81ff0, module=0x19d82b20) at coll_tuned_allreduce.c:223
> #10 0x00002aedbd7514f7 in ompi_coll_tuned_allreduce_intra_dec_fixed
> (sbuf=0x7ffff279d444, rbuf=0x7ffff279d440, count=1, dtype=0x6788220,
> op=0x6787a20, comm=0x19d81ff0, module=0x19d82b20) at
> coll_tuned_decision_fixed.c:63
> #11 0x00002aedb85c7792 in PMPI_Allreduce (sendbuf=0x7ffff279d444,
> recvbuf=0x7ffff279d440, count=1, datatype=0x6788220, op=0x6787a20,
> comm=0x19d81ff0) at pallreduce.c:102 #12 0x0000000004387dbf in
> FEMTown::MPI::Allreduce (sendbuf=0x7ffff279d444, recvbuf=0x7ffff279d440,
> count=1, datatype=0x6788220, op=0x6787a20, comm=0x19d81ff0) at
> stubs.cpp:626 #13 0x0000000004058be8 in FEMTown::Domain::align (itf=
> {<FEMTown::Boost::shared_base_ptr<FEMTown::Domain::Interface>>
> = {_vptr.shared_base_ptr = 0x7ffff279d620, ptr_ = {px = 0x199942a4, pn =
> {pi_ = 0x6}}}, <No data fields>}) at interface.cpp:371
> #14 0x00000000040cb858 in FEMTown::Field::detail::align_itfs_and_neighbhors
> (dim=2, set={px = 0x7ffff279d780, pn = {pi_ = 0x2f279d640}},
> check_info=@0x7ffff279d7f0) at check.cpp:63 #15 0x00000000040cbfa8 in
> FEMTown::Field::align_elements (set={px = 0x7ffff279d950, pn = {pi_ =
> 0x66e08d0}}, check_info=@0x7ffff279d7f0) at check.cpp:159 #16
> 0x00000000039acdd4 in PyField_align_elements (self=0x0,
> args=0x2aaab0765050, kwds=0x19d2e950) at check.cpp:31 #17
> 0x0000000001fbf76d in FEMTown::Main::ExErrCatch<_object* (*)(_object*,
> _object*, _object*)>::exec<_object> (this=0x7ffff279dc20, s=0x0,
> po1=0x2aaab0765050, po2=0x19d2e950) at
> /home/qa/svntop/femtown/modules/main/py/exception.hpp:463
> #18 0x00000000039acc82 in PyField_align_elements_ewrap (self=0x0,
> args=0x2aaab0765050, kwds=0x19d2e950) at check.cpp:39 #19
> 0x00000000044093a0 in PyEval_EvalFrameEx (f=0x19b52e90, throwflag=<value
> optimized out>) at Python/ceval.c:3921 #20 0x000000000440aae9 in
> PyEval_EvalCodeEx (co=0x2aaab754ad50, globals=<value optimized out>,
> locals=<value optimized out>, args=0x3, argcount=1, kws=0x19ace4a0,
> kwcount=2, defs=0x2aaab75e4800, defcount=2, closure=0x0) at
> Python/ceval.c:2968
> #21 0x0000000004408f58 in PyEval_EvalFrameEx (f=0x19ace2d0,
> throwflag=<value optimized out>) at Python/ceval.c:3802 #22
> 0x000000000440aae9 in PyEval_EvalCodeEx (co=0x2aaab7550120, globals=<value
> optimized out>, locals=<value optimized out>, args=0x7, argcount=1,
> kws=0x19acc418, kwcount=3, defs=0x2aaab759e958, defcount=6, closure=0x0)
> at Python/ceval.c:2968
> #23 0x0000000004408f58 in PyEval_EvalFrameEx (f=0x19acc1c0,
> throwflag=<value optimized out>) at Python/ceval.c:3802 #24
> 0x000000000440aae9 in PyEval_EvalCodeEx (co=0x2aaab8b5e738, globals=<value
> optimized out>, locals=<value optimized out>, args=0x6, argcount=1,
> kws=0x19abd328, kwcount=5, defs=0x2aaab891b7e8, defcount=3, closure=0x0)
> at Python/ceval.c:2968
> #25 0x0000000004408f58 in PyEval_EvalFrameEx (f=0x19abcea0,
> throwflag=<value optimized out>) at Python/ceval.c:3802 #26
> 0x000000000440aae9 in PyEval_EvalCodeEx (co=0x2aaab3eb4198, globals=<value
> optimized out>, locals=<value optimized out>, args=0xb, argcount=1,
> kws=0x19a89df0, kwcount=10, defs=0x0, defcount=0, closure=0x0) at
> Python/ceval.c:2968
> #27 0x0000000004408f58 in PyEval_EvalFrameEx (f=0x19a89c40,
> throwflag=<value optimized out>) at Python/ceval.c:3802 #28
> 0x000000000440aae9 in PyEval_EvalCodeEx (co=0x2aaab3eb4288, globals=<value
> optimized out>, locals=<value optimized out>, args=0x1, argcount=0,
> kws=0x19a89330, kwcount=0, defs=0x2aaab8b66668, defcount=1, closure=0x0)
> at Python/ceval.c:2968
> #29 0x0000000004408f58 in PyEval_EvalFrameEx (f=0x19a891b0,
> throwflag=<value optimized out>) at Python/ceval.c:3802 #30
> 0x000000000440aae9 in PyEval_EvalCodeEx (co=0x2aaab8b6a738, globals=<value
> optimized out>, locals=<value optimized out>, args=0x0, argcount=0,
> kws=0x0, kwcount=0, defs=0x0, defcount=0, closure=0x0) at
> Python/ceval.c:2968
> #31 0x000000000440ac02 in PyEval_EvalCode (co=0x1902f9b0, globals=0x0,
> locals=0x190d9700) at Python/ceval.c:522 #32 0x000000000442853c in
> PyRun_StringFlags (str=0x192fd3d8 "DIRECT.Actran.main()", start=<value
> optimized out>, globals=0x192213d0, locals=0x192213d0, flags=0x0) at
> Python/pythonrun.c:1335 #33 0x0000000004429690 in PyRun_SimpleStringFlags
> (command=0x192fd3d8 "DIRECT.Actran.main()", flags=0x0) at
> Python/pythonrun.c:957 #34 0x0000000001fa1cf9 in
> FEMTown::Python::FEMPy::run_application (this=0x7ffff279f650) at
> fempy.cpp:873 #35 0x000000000434ce99 in FEMTown::Main::Batch::run
> (this=0x7ffff279f650) at batch.cpp:374 #36 0x0000000001f9aa25 in main
> (argc=8, argv=0x7ffff279fa48) at main.cpp:10 (gdb) f 1
> #1 0x00002aedbc4e05f4 in btl_openib_handle_incoming
> (openib_btl=0x1902f9b0, ep=0x1908a1c0, frag=0x190d9700, byte_len=18) at
> btl_openib_component.c:2881 2881 reg->cbfunc(
> &openib_btl->super, hdr->tag, des, reg->cbdata ); Current language: auto;
> currently c
> (gdb)
> #1 0x00002aedbc4e05f4 in btl_openib_handle_incoming
> (openib_btl=0x1902f9b0, ep=0x1908a1c0, frag=0x190d9700, byte_len=18) at
> btl_openib_component.c:2881 2881 reg->cbfunc(
> &openib_btl->super, hdr->tag, des, reg->cbdata ); (gdb) l
> 2876
> 2877 if(OPAL_LIKELY(!(is_credit_msg = is_credit_message(frag)))) {
> 2878 /* call registered callback */
> 2879 mca_btl_active_message_callback_t* reg;
> 2880 reg = mca_btl_base_active_message_trigger + hdr->tag;
> 2881 reg->cbfunc( &openib_btl->super, hdr->tag, des, reg->cbdata
> ); 2882 if(MCA_BTL_OPENIB_RDMA_FRAG(frag)) {
> 2883 cqp = (hdr->credits >> 11) & 0x0f;
> 2884 hdr->credits &= 0x87ff;
> 2885 } else {
>
> Regards,
> Eloi
>
> On Friday 16 July 2010 16:01:02 Eloi Gaudry wrote:
> > Hi Edgar,
> >
> > The only difference I could observed was that the segmentation fault
> > appeared sometimes later during the parallel computation.
> >
> > I'm running out of idea here. I wish I could use the "--mca coll tuned"
> > with "--mca self,sm,tcp" so that I could check that the issue is not
> > somehow limited to the tuned collective routines.
> >
> > Thanks,
> > Eloi
> >
> > On Thursday 15 July 2010 17:24:24 Edgar Gabriel wrote:
> > > On 7/15/2010 10:18 AM, Eloi Gaudry wrote:
> > > > hi edgar,
> > > >
> > > > thanks for the tips, I'm gonna try this option as well. the
> > > > segmentation fault i'm observing always happened during a collective
> > > > communication indeed... does it basically switch all collective
> > > > communication to basic mode, right ?
> > > >
> > > > sorry for my ignorance, but what's a NCA ?
> > >
> > > sorry, I meant to type HCA (InifinBand networking card)
> > >
> > > Thanks
> > > Edgar
> > >
> > > > thanks,
> > > > éloi
> > > >
> > > > On Thursday 15 July 2010 16:20:54 Edgar Gabriel wrote:
> > > >> you could try first to use the algorithms in the basic module, e.g.
> > > >>
> > > >> mpirun -np x --mca coll basic ./mytest
> > > >>
> > > >> and see whether this makes a difference. I used to observe sometimes
> > > >> a (similar ?) problem in the openib btl triggered from the tuned
> > > >> collective component, in cases where the ofed libraries were
> > > >> installed but no NCA was found on a node. It used to work however
> > > >> with the basic component.
> > > >>
> > > >> Thanks
> > > >> Edgar
> > > >>
> > > >> On 7/15/2010 3:08 AM, Eloi Gaudry wrote:
> > > >>> hi Rolf,
> > > >>>
> > > >>> unfortunately, i couldn't get rid of that annoying segmentation
> > > >>> fault when selecting another bcast algorithm. i'm now going to
> > > >>> replace MPI_Bcast with a naive implementation (using MPI_Send and
> > > >>> MPI_Recv) and see if that helps.
> > > >>>
> > > >>> regards,
> > > >>> éloi
> > > >>>
> > > >>> On Wednesday 14 July 2010 10:59:53 Eloi Gaudry wrote:
> > > >>>> Hi Rolf,
> > > >>>>
> > > >>>> thanks for your input. You're right, I miss the
> > > >>>> coll_tuned_use_dynamic_rules option.
> > > >>>>
> > > >>>> I'll check if I the segmentation fault disappears when using the
> > > >>>> basic bcast linear algorithm using the proper command line you
> > > >>>> provided.
> > > >>>>
> > > >>>> Regards,
> > > >>>> Eloi
> > > >>>>
> > > >>>> On Tuesday 13 July 2010 20:39:59 Rolf vandeVaart wrote:
> > > >>>>> Hi Eloi:
> > > >>>>> To select the different bcast algorithms, you need to add an
> > > >>>>> extra mca parameter that tells the library to use dynamic
> > > >>>>> selection. --mca coll_tuned_use_dynamic_rules 1
> > > >>>>>
> > > >>>>> One way to make sure you are typing this in correctly is to use
> > > >>>>> it with ompi_info. Do the following:
> > > >>>>> ompi_info -mca coll_tuned_use_dynamic_rules 1 --param coll
> > > >>>>>
> > > >>>>> You should see lots of output with all the different algorithms
> > > >>>>> that can be selected for the various collectives.
> > > >>>>> Therefore, you need this:
> > > >>>>>
> > > >>>>> --mca coll_tuned_use_dynamic_rules 1 --mca
> > > >>>>> coll_tuned_bcast_algorithm 1
> > > >>>>>
> > > >>>>> Rolf
> > > >>>>>
> > > >>>>> On 07/13/10 11:28, Eloi Gaudry wrote:
> > > >>>>>> Hi,
> > > >>>>>>
> > > >>>>>> I've found that "--mca coll_tuned_bcast_algorithm 1" allowed to
> > > >>>>>> switch to the basic linear algorithm. Anyway whatever the
> > > >>>>>> algorithm used, the segmentation fault remains.
> > > >>>>>>
> > > >>>>>> Does anyone could give some advice on ways to diagnose the issue
> > > >>>>>> I'm facing ?
> > > >>>>>>
> > > >>>>>> Regards,
> > > >>>>>> Eloi
> > > >>>>>>
> > > >>>>>> On Monday 12 July 2010 10:53:58 Eloi Gaudry wrote:
> > > >>>>>>> Hi,
> > > >>>>>>>
> > > >>>>>>> I'm focusing on the MPI_Bcast routine that seems to randomly
> > > >>>>>>> segfault when using the openib btl. I'd like to know if there
> > > >>>>>>> is any way to make OpenMPI switch to a different algorithm
> > > >>>>>>> than the default one being selected for MPI_Bcast.
> > > >>>>>>>
> > > >>>>>>> Thanks for your help,
> > > >>>>>>> Eloi
> > > >>>>>>>
> > > >>>>>>> On Friday 02 July 2010 11:06:52 Eloi Gaudry wrote:
> > > >>>>>>>> Hi,
> > > >>>>>>>>
> > > >>>>>>>> I'm observing a random segmentation fault during an internode
> > > >>>>>>>> parallel computation involving the openib btl and
> > > >>>>>>>> OpenMPI-1.4.2 (the same issue can be observed with
> > > >>>>>>>> OpenMPI-1.3.3).
> > > >>>>>>>>
> > > >>>>>>>> mpirun (Open MPI) 1.4.2
> > > >>>>>>>> Report bugs to http://www.open-mpi.org/community/help/
> > > >>>>>>>> [pbn08:02624] *** Process received signal ***
> > > >>>>>>>> [pbn08:02624] Signal: Segmentation fault (11)
> > > >>>>>>>> [pbn08:02624] Signal code: Address not mapped (1)
> > > >>>>>>>> [pbn08:02624] Failing at address: (nil)
> > > >>>>>>>> [pbn08:02624] [ 0] /lib64/libpthread.so.0 [0x349540e4c0]
> > > >>>>>>>> [pbn08:02624] *** End of error message ***
> > > >>>>>>>> sh: line 1: 2624 Segmentation fault
> > > >>>>>>>>
> > > >>>>>>>> \/share\/hpc3\/actran_suite\/Actran_11\.0\.rc2\.41872\/RedHatE
> > > >>>>>>>> L\ -5 \/ x 86 _6 4\ /bin\/actranpy_mp
> > > >>>>>>>> '--apl=/share/hpc3/actran_suite/Actran_11.0.rc2.41872/RedHatEL
> > > >>>>>>>> -5 /x 86 _ 64 /A c tran_11.0.rc2.41872'
> > > >>>>>>>> '--inputfile=/work/st25652/LSF_130073_0_47696_0/Case1_3Dreal_m
> > > >>>>>>>> 4_ n2 .d a t'
> > > >>>>>>>> '--scratch=/scratch/st25652/LSF_130073_0_47696_0/scratch'
> > > >>>>>>>> '--mem=3200' '--threads=1' '--errorlevel=FATAL' '--t_max=0.1'
> > > >>>>>>>> '--parallel=domain'
> > > >>>>>>>>
> > > >>>>>>>> If I choose not to use the openib btl (by using --mca btl
> > > >>>>>>>> self,sm,tcp on the command line, for instance), I don't
> > > >>>>>>>> encounter any problem and the parallel computation runs
> > > >>>>>>>> flawlessly.
> > > >>>>>>>>
> > > >>>>>>>> I would like to get some help to be able:
> > > >>>>>>>> - to diagnose the issue I'm facing with the openib btl
> > > >>>>>>>> - understand why this issue is observed only when using the
> > > >>>>>>>> openib btl and not when using self,sm,tcp
> > > >>>>>>>>
> > > >>>>>>>> Any help would be very much appreciated.
> > > >>>>>>>>
> > > >>>>>>>> The outputs of ompi_info and the configure scripts of OpenMPI
> > > >>>>>>>> are enclosed to this email, and some information on the
> > > >>>>>>>> infiniband drivers as well.
> > > >>>>>>>>
> > > >>>>>>>> Here is the command line used when launching a parallel
> > > >>>>>>>> computation
> > > >>>>>>>>
> > > >>>>>>>> using infiniband:
> > > >>>>>>>> path_to_openmpi/bin/mpirun -np $NPROCESS --hostfile
> > > >>>>>>>> host.list --mca
> > > >>>>>>>>
> > > >>>>>>>> btl openib,sm,self,tcp --display-map --verbose --version
> > > >>>>>>>> --mca mpi_warn_on_fork 0 --mca btl_openib_want_fork_support 0
> > > >>>>>>>> [...]
> > > >>>>>>>>
> > > >>>>>>>> and the command line used if not using infiniband:
> > > >>>>>>>> path_to_openmpi/bin/mpirun -np $NPROCESS --hostfile
> > > >>>>>>>> host.list --mca
> > > >>>>>>>>
> > > >>>>>>>> btl self,sm,tcp --display-map --verbose --version --mca
> > > >>>>>>>> mpi_warn_on_fork 0 --mca btl_openib_want_fork_support 0 [...]
> > > >>>>>>>>
> > > >>>>>>>> Thanks,
> > > >>>>>>>> Eloi
> > > >>>>>>
> > > >>>>>> _______________________________________________
> > > >>>>>> users mailing list
> > > >>>>>> us...@open-mpi.org
> > > >>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
--
Eloi Gaudry
Free Field Technologies
Company Website: http://www.fft.be
Company Phone: +32 10 487 959
