Hello, I also experience a similar problem with the MUMPS solver, when I run it on a cluster. After several hours of running the code does not produce any results, although the command top shows that the program occupies 100% of the CPU.
The difference here, however, is that the same program runs fine on my PC. The differences between my PC and the cluster are: 1) 32bit vs 64-bit(cluster) 2) intel compiler vs portland compiler(cluster) Any thoughts on what might cause this? Thank you, Vasilis On Friday 20 November 2009 03:50:17 am Jiaye Li wrote: > Hello > > I installed openmpi-1.3.3 on my single node(cpu) intel 64bit quad-core > machine. The compiler info is: > > > *************************************************************************** > *********************************** intel-icc101018-10.1.018-1.i386 > libgcc-4.4.0-4.i586 > gcc-4.4.0-4.i586 > gcc-gfortran-4.4.0-4.i586 > gcc-c++-4.4.0-4.i586 > intel-ifort101018-10.1.018-1.i386 > > and the architecture is: > > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 23 > model name : Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz > stepping : 10 > cpu MHz : 2825.937 > cache size : 6144 KB > physical id : 0 > siblings : 4 > core id : 0 > cpu cores : 4 > apicid : 0 > initial apicid : 0 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 13 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca > cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm > constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est > tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm tpr_shadow vnmi flexpriority > bogomips : 5651.87 > clflush size : 64 > power management: > > *************************************************************************** > *********************************** > > I compiled PWscf program with openmpi and tested the program. At the > beginning, the execution of PW went on well, but after about 10 h, when > the program is going to finish. The program hang there, but the cpu time > is still occupied. (100% taken up by the program). There seems to be > something wrong, somewhere. Any ideas? Thank you in advance. > > This is the config.log of Ompi: > > *************************************************************************** > *********************************** This file contains any messages > produced by compilers while > running configure, to aid debugging if configure makes a mistake. > > It was created by Open MPI configure 1.3.3, which was > generated by GNU Autoconf 2.63. Invocation command line was > > $ ./configure --prefix=/opt/openmpi-1.3.3 --disable-static CC=gcc > FC=ifort F77=ifort --enable-shared > > ## --------- ## > ## Platform. ## > ## --------- ## > > hostname = localhost > uname -m = i686 > uname -r = 2.6.29.4-167.fc11.i686.PAE > uname -s = Linux > uname -v = #1 SMP Wed May 27 17:28:22 EDT 2009 > > /usr/bin/uname -p = unknown > /bin/uname -X = unknown > > /bin/arch = i686 > /usr/bin/arch -k = unknown > /usr/convex/getsysinfo = unknown > /usr/bin/hostinfo = unknown > /bin/machine = unknown > /usr/bin/oslevel = unknown > /bin/universe = unknown > > PATH: /home/jy/Download/XCrySDen-1.5.21-src-all > PATH: /home/jy/Download/XCrySDen-1.5.21-src-all > PATH: /home/jy/Download/XCrySDen-1.5.21-src-all > PATH: /home/jy/Download/XCrySDen-1.5.21-src-all > PATH: /home/jy/.wine/drive_c/windows > PATH: /home/jy/Download/XCrySDen-1.5.21-src > PATH: /home/jy/bin/vtstscripts > PATH: /opt/mpich2-1.2/bin > PATH: /opt/intel/fc/10.1.018/bin > PATH: /opt/intel/cc/10.1.018/bin > PATH: /usr/lib/qt-3.3/bin > PATH: /usr/kerberos/bin > PATH: /usr/lib/ccache > PATH: /usr/local/bin > PATH: /usr/bin > PATH: /bin > PATH: /usr/local/sbin > PATH: /usr/sbin > PATH: /sbin > PATH: /home/jy/Download/XCrySDen-1.5.21-src/scripts > PATH: /home/jy/Download/XCrySDen-1.5.21-src/util > PATH: /home/jy/Download/XCrySDen-1.5.21-src-all/scripts > PATH: /home/jy/Download/XCrySDen-1.5.21-src-all/util > PATH: /home/jy/Download/XCrySDen-1.5.21-src-all/scripts > PATH: /home/jy/Download/XCrySDen-1.5.21-src-all/util > PATH: /home/jy/bin > PATH: /home/jy/Download/XCrySDen-1.5.21-src-all/scripts > PATH: /home/jy/Download/XCrySDen-1.5.21-src-all/util > PATH: /home/jy/Download/XCrySDen-1.5.21-src-all/scripts > PATH: /home/jy/Download/XCrySDen-1.5.21-src-all/util > > > ## ----------- ## > ## Core tests. ## > ## ----------- ## > > configure:3424: checking for a BSD-compatible install > configure:3492: result: /usr/bin/install -c > configure:3503: checking whether build environment is sane > configure:3546: result: yes > configure:3571: checking for a thread-safe mkdir -p > configure:3610: result: /bin/mkdir -p > configure:3623: checking for gawk > configure:3639: found /usr/bin/gawk > configure:3650: result: gawk > configure:3661: checking whether make sets $(MAKE) > configure:3683: result: yes > configure:3853: checking how to create a ustar tar archive > configure:3866: tar --version > tar (GNU tar) 1.22 > Copyright (C) 2009 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later > <http://gnu.org/licenses/gpl.html > > >. > > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. > > ......... > > > configure: exit 0 > > > *************************************************************************** > *********************************** >
