Using a completely standard build:
./configure --prefix=/scinet/gpc/mpi/openmpi/1.3.2-gcc-v4.4.0-ofed --with-openib
make make installwith a config.log attached, generating a distribution with an ompi_info --all that is also attached.
The very trivial attached program, which just does a series of SENDRECVs rightwards through MPI_COMM_WORLD, hangs extremely reliably when run like so on an 8 core box: mpirun -np 6 -mca btl self,sm ./diffusion-mpi The hanging seems to always occur within the first 500 or so iterations - but sometimes between the 10th and 20th and sometimes not until the late 400s. The hanging occurs both on a new dual socket quad core nehalem box, and an older harpertown machine. Running without sm, however, seems to work fine: mpirun -np 6 -mca btl self,tcp ./diffusion-mpi never gives any problems.Running with OpenMPI 1.3.3, built in the same way, gives the hangs significantly less frequently - it hangs one time out of every ten or so. But obviously this is still far too often to deploy in a production environment.
Where should we be looking to track down this problem? - Jonathan -- Jonathan Dursi <ljdu...@scinet.utoronto.ca>
config.log.gz
Description: GNU Zip compressed data
Package: Open MPI root@gpc-f101n001 Distribution
Open MPI: 1.3.2
Open MPI SVN revision: r21054
Open MPI release date: Apr 21, 2009
Open RTE: 1.3.2
Open RTE SVN revision: r21054
Open RTE release date: Apr 21, 2009
OPAL: 1.3.2
OPAL SVN revision: r21054
OPAL release date: Apr 21, 2009
Ident string: 1.3.2
MCA backtrace: execinfo (MCA v2.0, API v2.0, Component v1.3.2)
MCA memory: ptmalloc2 (MCA v2.0, API v2.0, Component v1.3.2)
MCA paffinity: linux (MCA v2.0, API v2.0, Component v1.3.2)
MCA carto: auto_detect (MCA v2.0, API v2.0, Component v1.3.2)
MCA carto: file (MCA v2.0, API v2.0, Component v1.3.2)
MCA maffinity: first_use (MCA v2.0, API v2.0, Component v1.3.2)
MCA timer: linux (MCA v2.0, API v2.0, Component v1.3.2)
MCA installdirs: env (MCA v2.0, API v2.0, Component v1.3.2)
MCA installdirs: config (MCA v2.0, API v2.0, Component v1.3.2)
MCA dpm: orte (MCA v2.0, API v2.0, Component v1.3.2)
MCA pubsub: orte (MCA v2.0, API v2.0, Component v1.3.2)
MCA allocator: basic (MCA v2.0, API v2.0, Component v1.3.2)
MCA allocator: bucket (MCA v2.0, API v2.0, Component v1.3.2)
MCA coll: basic (MCA v2.0, API v2.0, Component v1.3.2)
MCA coll: hierarch (MCA v2.0, API v2.0, Component v1.3.2)
MCA coll: inter (MCA v2.0, API v2.0, Component v1.3.2)
MCA coll: self (MCA v2.0, API v2.0, Component v1.3.2)
MCA coll: sm (MCA v2.0, API v2.0, Component v1.3.2)
MCA coll: sync (MCA v2.0, API v2.0, Component v1.3.2)
MCA coll: tuned (MCA v2.0, API v2.0, Component v1.3.2)
MCA io: romio (MCA v2.0, API v2.0, Component v1.3.2)
MCA mpool: fake (MCA v2.0, API v2.0, Component v1.3.2)
MCA mpool: rdma (MCA v2.0, API v2.0, Component v1.3.2)
MCA mpool: sm (MCA v2.0, API v2.0, Component v1.3.2)
MCA pml: cm (MCA v2.0, API v2.0, Component v1.3.2)
MCA pml: csum (MCA v2.0, API v2.0, Component v1.3.2)
MCA pml: ob1 (MCA v2.0, API v2.0, Component v1.3.2)
MCA pml: v (MCA v2.0, API v2.0, Component v1.3.2)
MCA bml: r2 (MCA v2.0, API v2.0, Component v1.3.2)
MCA rcache: vma (MCA v2.0, API v2.0, Component v1.3.2)
MCA btl: ofud (MCA v2.0, API v2.0, Component v1.3.2)
MCA btl: openib (MCA v2.0, API v2.0, Component v1.3.2)
MCA btl: self (MCA v2.0, API v2.0, Component v1.3.2)
MCA btl: sm (MCA v2.0, API v2.0, Component v1.3.2)
MCA btl: tcp (MCA v2.0, API v2.0, Component v1.3.2)
MCA topo: unity (MCA v2.0, API v2.0, Component v1.3.2)
MCA osc: pt2pt (MCA v2.0, API v2.0, Component v1.3.2)
MCA osc: rdma (MCA v2.0, API v2.0, Component v1.3.2)
MCA iof: hnp (MCA v2.0, API v2.0, Component v1.3.2)
MCA iof: orted (MCA v2.0, API v2.0, Component v1.3.2)
MCA iof: tool (MCA v2.0, API v2.0, Component v1.3.2)
MCA oob: tcp (MCA v2.0, API v2.0, Component v1.3.2)
MCA odls: default (MCA v2.0, API v2.0, Component v1.3.2)
MCA ras: slurm (MCA v2.0, API v2.0, Component v1.3.2)
MCA rmaps: rank_file (MCA v2.0, API v2.0, Component v1.3.2)
MCA rmaps: round_robin (MCA v2.0, API v2.0, Component v1.3.2)
MCA rmaps: seq (MCA v2.0, API v2.0, Component v1.3.2)
MCA rml: oob (MCA v2.0, API v2.0, Component v1.3.2)
MCA routed: binomial (MCA v2.0, API v2.0, Component v1.3.2)
MCA routed: direct (MCA v2.0, API v2.0, Component v1.3.2)
MCA routed: linear (MCA v2.0, API v2.0, Component v1.3.2)
MCA plm: rsh (MCA v2.0, API v2.0, Component v1.3.2)
MCA plm: slurm (MCA v2.0, API v2.0, Component v1.3.2)
MCA filem: rsh (MCA v2.0, API v2.0, Component v1.3.2)
MCA errmgr: default (MCA v2.0, API v2.0, Component v1.3.2)
MCA ess: env (MCA v2.0, API v2.0, Component v1.3.2)
MCA ess: hnp (MCA v2.0, API v2.0, Component v1.3.2)
MCA ess: singleton (MCA v2.0, API v2.0, Component v1.3.2)
MCA ess: slurm (MCA v2.0, API v2.0, Component v1.3.2)
MCA ess: tool (MCA v2.0, API v2.0, Component v1.3.2)
MCA grpcomm: bad (MCA v2.0, API v2.0, Component v1.3.2)
MCA grpcomm: basic (MCA v2.0, API v2.0, Component v1.3.2)
Prefix: /scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed
Exec_prefix: /scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed
Bindir: /scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/bin
Sbindir: /scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/sbin
Libdir: /scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/lib
Incdir: /scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/include
Mandir:
/scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/share/man
Pkglibdir:
/scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/lib/openmpi
Libexecdir: /scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/libexec
Datarootdir: /scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/share
Datadir: /scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/share
Sysconfdir: /scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/etc
Sharedstatedir: /scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/com
Localstatedir: /scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/var
Infodir:
/scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/share/info
Pkgdatadir:
/scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/share/openmpi
Pkglibdir:
/scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/lib/openmpi
Pkgincludedir:
/scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/include/openmpi
Configured architecture: x86_64-unknown-linux-gnu
Configure host: gpc-f101n001
Configured by: root
Configured on: Sat Aug 1 18:23:45 EDT 2009
Configure host: gpc-f101n001
Built by: northrup
Built on: Sat Aug 1 18:35:59 EDT 2009
Built host: gpc-f101n001
C bindings: yes
C++ bindings: yes
Fortran77 bindings: yes (all)
Fortran90 bindings: yes
Fortran90 bindings size: small
C compiler: icc
C compiler absolute: /scinet/gpc/x1/intel/Compiler/11.0/081/bin/intel64/icc
C char size: 1
C bool size: 1
C short size: 2
C int size: 4
C long size: 8
C float size: 4
C double size: 8
C pointer size: 8
C char align: 1
C bool align: 1
C int align: 4
C float align: 4
C double align: 8
C++ compiler: icpc
C++ compiler absolute:
/scinet/gpc/x1/intel/Compiler/11.0/081/bin/intel64/icpc
Fortran77 compiler: ifort
Fortran77 compiler abs:
/scinet/gpc/x1/intel/Compiler/11.0/081/bin/intel64/ifort
Fortran90 compiler: ifort
Fortran90 compiler abs:
/scinet/gpc/x1/intel/Compiler/11.0/081/bin/intel64/ifort
Fort integer size: 4
Fort logical size: 4
Fort logical value true: -1
Fort have integer1: yes
Fort have integer2: yes
Fort have integer4: yes
Fort have integer8: yes
Fort have integer16: no
Fort have real4: yes
Fort have real8: yes
Fort have real16: no
Fort have complex8: yes
Fort have complex16: yes
Fort have complex32: no
Fort integer1 size: 1
Fort integer2 size: 2
Fort integer4 size: 4
Fort integer8 size: 8
Fort integer16 size: -1
Fort real size: 4
Fort real4 size: 4
Fort real8 size: 8
Fort real16 size: 16
Fort dbl prec size: 4
Fort cplx size: 4
Fort dbl cplx size: 4
Fort cplx8 size: 8
Fort cplx16 size: 16
Fort cplx32 size: 32
Fort integer align: 1
Fort integer1 align: 1
Fort integer2 align: 1
Fort integer4 align: 1
Fort integer8 align: 1
Fort integer16 align: -1
Fort real align: 1
Fort real4 align: 1
Fort real8 align: 1
Fort real16 align: 1
Fort dbl prec align: 1
Fort cplx align: 1
Fort dbl cplx align: 1
Fort cplx8 align: 1
Fort cplx16 align: 1
Fort cplx32 align: 1
C profiling: yes
C++ profiling: yes
Fortran77 profiling: yes
Fortran90 profiling: yes
C++ exceptions: no
Thread support: posix (mpi: no, progress: no)
Sparse Groups: no
Build CFLAGS: -O3 -DNDEBUG -finline-functions -fno-strict-aliasing
-restrict -pthread -fvisibility=hidden
Build CXXFLAGS: -O3 -DNDEBUG -finline-functions -pthread
Build FFLAGS:
Build FCFLAGS:
Build LDFLAGS: -export-dynamic
Build LIBS: -lnsl -lutil
Wrapper extra CFLAGS: -pthread
Wrapper extra CXXFLAGS: -pthread
Wrapper extra FFLAGS:
Wrapper extra FCFLAGS:
Wrapper extra LDFLAGS:
Wrapper extra LIBS: -ldl -Wl,--export-dynamic -lnsl -lutil
Internal debug support: no
MPI parameter check: runtime
Memory profiling support: no
Memory debugging support: no
libltdl support: yes
Heterogeneous support: no
mpirun default --prefix: no
MPI I/O support: yes
MPI_WTIME support: gettimeofday
Symbol visibility support: yes
FT Checkpoint support: no (checkpoint thread: no)
MCA mca: parameter "mca_param_files" (current value:
"/home/ljdursi/.openmpi/mca-params.conf:/scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/etc/openmpi-mca-params.conf",
data source: default value)
Path for MCA configuration files containing default
parameter values
MCA mca: parameter "mca_base_param_file_prefix" (current
value: <none>, data source: default value)
Aggregate MCA parameter file sets
MCA mca: parameter "mca_base_param_file_path" (current value:
"/scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/share/openmpi/amca-param-sets:/home/ljdursi",
data source: default value)
Aggregate MCA parameter Search path
MCA mca: parameter "mca_base_param_file_path_force" (current
value: <none>, data source: default value)
Forced Aggregate MCA parameter Search path
MCA mca: parameter "mca_component_path" (current value:
"/scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/lib/openmpi:/home/ljdursi/.openmpi/components",
data source: default value)
Path where to look for Open MPI and ORTE components
MCA mca: parameter "mca_verbose" (current value: <none>, data
source: default value)
Top-level verbosity parameter
MCA mca: parameter "mca_component_show_load_errors" (current
value: "1", data source: default value)
Whether to show errors for components that failed to
load or not
MCA mca: parameter "mca_component_disable_dlopen" (current
value: "0", data source: default value)
Whether to attempt to disable opening dynamic
components or not
MCA mpi: parameter "mpi_param_check" (current value: "1", data
source: default value)
Whether you want MPI API parameters checked at
run-time or not. Possible values are 0 (no checking) and 1 (perform checking
at run-time)
MCA mpi: parameter "mpi_yield_when_idle" (current value: "-1",
data source: default value)
Yield the processor when waiting for MPI
communication (for MPI processes, will default to 1 when oversubscribing nodes)
MCA mpi: parameter "mpi_event_tick_rate" (current value: "-1",
data source: default value)
How often to progress TCP communications (0 = never,
otherwise specified in microseconds)
MCA mpi: parameter "mpi_show_handle_leaks" (current value:
"0", data source: default value)
Whether MPI_FINALIZE shows all MPI handles that were
not freed or not
MCA mpi: parameter "mpi_no_free_handles" (current value: "0",
data source: default value)
Whether to actually free MPI objects when their
handles are freed
MCA mpi: parameter "mpi_show_mpi_alloc_mem_leaks" (current
value: "0", data source: default value)
If >0, MPI_FINALIZE will show up to this many
instances of memory allocated by MPI_ALLOC_MEM that was not freed by
MPI_FREE_MEM
MCA mpi: parameter "mpi_show_mca_params" (current value:
<none>, data source: default value)
Whether to show all MCA parameter values during
MPI_INIT or not (good for reproducability of MPI jobs for debug purposes).
Accepted values are all, default, file, api, and enviro - or a comma delimited
combination of them
MCA mpi: parameter "mpi_show_mca_params_file" (current value:
<none>, data source: default value)
If mpi_show_mca_params is true, setting this string
to a valid filename tells Open MPI to dump all the MCA parameter values into a
file suitable for reading via the mca_param_files parameter (good for
reproducability of MPI jobs)
MCA mpi: parameter "mpi_keep_peer_hostnames" (current value:
"1", data source: default value)
If nonzero, save the string hostnames of all MPI peer
processes (mostly for error / debugging output messages). This can add quite a
bit of memory usage to each MPI process.
MCA mpi: parameter "mpi_abort_delay" (current value: "0", data
source: default value)
If nonzero, print out an identifying message when
MPI_ABORT is invoked (hostname, PID of the process that called MPI_ABORT) and
delay for that many seconds before exiting (a negative delay value means to
never abort). This allows attaching of a debugger before quitting the job.
MCA mpi: parameter "mpi_abort_print_stack" (current value:
"0", data source: default value)
If nonzero, print out a stack trace when MPI_ABORT is
invoked
MCA mpi: parameter "mpi_preconnect_mpi" (current value: "0",
data source: default value, synonyms: mpi_preconnect_all)
Whether to force MPI processes to fully wire-up the
MPI connections between MPI processes during MPI_INIT (vs. making connections
lazily -- upon the first MPI traffic between each process peer pair)
MCA mpi: parameter "mpi_preconnect_all" (current value: "0",
data source: default value, deprecated, synonym of: mpi_preconnect_mpi)
Whether to force MPI processes to fully wire-up the
MPI connections between MPI processes during MPI_INIT (vs. making connections
lazily -- upon the first MPI traffic between each process peer pair)
MCA mpi: parameter "mpi_leave_pinned" (current value: "-1",
data source: default value)
Whether to use the "leave pinned" protocol or not.
Enabling this setting can help bandwidth performance when repeatedly sending
and receiving large messages with the same buffers over RDMA-based networks (0
= do not use "leave pinned" protocol, 1 = use "leave pinned" protocol, -1 =
allow network to choose at runtime).
MCA mpi: parameter "mpi_leave_pinned_pipeline" (current value:
"0", data source: default value)
Whether to use the "leave pinned pipeline" protocol
or not.
MCA mpi: parameter "mpi_paffinity_alone" (current value: "0",
data source: default value)
If nonzero, assume that this job is the only (set of)
process(es) running on each node and bind processes to processors, starting
with processor ID 0
MCA mpi: parameter "mpi_warn_on_fork" (current value: "1",
data source: default value)
If nonzero, issue a warning if program forks under
conditions that could cause system errors
MCA mpi: information "mpi_have_sparse_group_storage" (value:
"0", data source: default value)
Whether this Open MPI installation supports storing
of data in MPI groups in "sparse" formats (good for extremely large process
count MPI jobs that create many communicators/groups)
MCA mpi: parameter "mpi_use_sparse_group_storage" (current
value: "0", data source: default value)
Whether to use "sparse" storage formats for MPI
groups (only relevant if mpi_have_sparse_group_storage is 1)
MCA orte: parameter "orte_base_help_aggregate" (current value:
"1", data source: default value)
If orte_base_help_aggregate is true, duplicate help
messages will be aggregated rather than displayed individually. This can be
helpful for parallel jobs that experience multiple identical failures; rather
than print out the same help/failure message N times, display it once with a
count of how many processes sent the same message.
MCA orte: parameter "orte_tmpdir_base" (current value: <none>,
data source: default value)
Base of the session directory tree
MCA orte: parameter "orte_no_session_dirs" (current value:
<none>, data source: default value)
Prohibited locations for session directories
(multiple locations separated by ',', default=NULL)
MCA orte: parameter "orte_debug" (current value: "0", data
source: default value)
Top-level ORTE debug switch (default verbosity: 1)
MCA orte: parameter "orte_debug_verbose" (current value: "-1",
data source: default value)
Verbosity level for ORTE debug messages (default: 1)
MCA orte: parameter "orte_debug_daemons" (current value: "0",
data source: default value)
Whether to debug the ORTE daemons or not
MCA orte: parameter "orte_debug_daemons_file" (current value:
"0", data source: default value)
Whether want stdout/stderr of daemons to go to a file
or not
MCA orte: parameter "orte_leave_session_attached" (current
value: "0", data source: default value)
Whether applications and/or daemons should leave
their sessions attached so that any output can be received - this allows X
forwarding without all the attendant debugging output
MCA orte: parameter "orte_do_not_launch" (current value: "0",
data source: default value)
Perform all necessary operations to prepare to launch
the application, but do not actually launch it
MCA orte: parameter "orte_daemon_spin" (current value: "0",
data source: default value)
Have any orteds spin until we can connect a debugger
to them
MCA orte: parameter "orte_daemon_fail" (current value: "-1",
data source: default value)
Have the specified orted fail after init for
debugging purposes
MCA orte: parameter "orte_daemon_fail_delay" (current value:
"0", data source: default value)
Have the specified orted fail after specified number
of seconds (default: 0 => no delay)
MCA orte: parameter "orte_heartbeat_rate" (current value: "0",
data source: default value)
Seconds between checks for daemon state-of-health
(default: 0 => do not check)
MCA orte: parameter "orte_startup_timeout" (current value: "0",
data source: default value)
Milliseconds/daemon to wait for startup before
declaring failed_to_start (default: 0 => do not check)
MCA orte: parameter "orte_timing" (current value: "0", data
source: default value)
Request that critical timing loops be measured
MCA orte: parameter "orte_base_user_debugger" (current value:
"totalview @mpirun@ -a @mpirun_args@ : ddt -n @np@ -start @executable@
@executable_argv@ @single_app@ : fxp @mpirun@ -a @mpirun_args@", data source:
default value)
Sequence of user-level debuggers to search for in
orterun
MCA orte: parameter "orte_abort_timeout" (current value: "1",
data source: default value)
Max time to wait [in secs] before aborting an ORTE
operation (default: 1sec)
MCA orte: parameter "orte_timeout_step" (current value: "1000",
data source: default value)
Time to wait [in usecs/proc] before aborting an ORTE
operation (default: 1000 usec/proc)
MCA orte: parameter "orte_default_hostfile" (current value:
<none>, data source: default value)
Name of the default hostfile (relative or absolute
path)
MCA orte: parameter "orte_keep_fqdn_hostnames" (current value:
"0", data source: default value)
Whether or not to keep FQDN hostnames [default: no]
MCA orte: parameter "orte_contiguous_nodes" (current value:
"2147483647", data source: default value)
Number of nodes after which contiguous nodename
encoding will automatically be used [default: INT_MAX]
MCA orte: parameter "orte_tag_output" (current value: "0", data
source: default value)
Tag all output with [job,rank] (default: false)
MCA orte: parameter "orte_xml_output" (current value: "0", data
source: default value)
Display all output in XML format (default: false)
MCA orte: parameter "orte_timestamp_output" (current value:
"0", data source: default value)
Timestamp all application process output (default:
false)
MCA orte: parameter "orte_output_filename" (current value:
<none>, data source: default value)
Redirect output from application processes into
filename.rank [default: NULL]
MCA orte: parameter "orte_show_resolved_nodenames" (current
value: "0", data source: default value)
Display any node names that are resolved to a
different name (default: false)
MCA orte: parameter "orte_hetero_apps" (current value: "0",
data source: default value)
Indicates that multiple app_contexts are being
provided that are a mix of 32/64 bit binaries (default: false)
MCA orte: parameter "orte_launch_agent" (current value:
"orted", data source: default value)
Command used to start processes on remote nodes
(default: orted)
MCA orte: parameter "orte_allocation_required" (current value:
"0", data source: default value)
Whether or not an allocation by a resource manager is
required [default: no]
MCA orte: parameter "orte_xterm" (current value: <none>, data
source: default value)
Create a new xterm window and display output from the
specified ranks there [default: none]
MCA orte: parameter "orte_forward_job_control" (current value:
"0", data source: default value)
Forward SIGTSTP (after converting to SIGSTOP) and
SIGCONT signals to the application procs [default: no]
MCA opal: parameter "opal_signal" (current value: "6,7,8,11",
data source: default value)
Comma-delimited list of integer signal numbers to
Open MPI to attempt to intercept. Upon receipt of the intercepted signal, Open
MPI will display a stack trace and abort. Open MPI will *not* replace signals
if handlers are already installed by the time MPI_INIT is invoked. Optionally
append ":complain" to any signal number in the comma-delimited list to make
Open MPI complain if it detects another signal handler (and therefore does not
insert its own).
MCA opal: parameter "opal_set_max_sys_limits" (current value:
"0", data source: default value)
Set to non-zero to automatically set any
system-imposed limits to the maximum allowed
MCA opal: parameter "opal_event_include" (current value:
"poll", data source: default value)
Comma-delimited list of libevent subsystems to use
(poll, select -- available on your platform)
MCA backtrace: parameter "backtrace" (current value: <none>, data
source: default value)
Default selection set of components for the backtrace
framework (<none> means use all components that can be found)
MCA backtrace: parameter "backtrace_base_verbose" (current value:
"0", data source: default value)
Verbosity level for the backtrace framework (0 = no
verbosity)
MCA backtrace: parameter "backtrace_execinfo_priority" (current
value: "0", data source: default value)
MCA memchecker: parameter "memchecker" (current value: <none>, data
source: default value)
Default selection set of components for the
memchecker framework (<none> means use all components that can be found)
MCA memory: parameter "memory" (current value: <none>, data
source: default value)
Default selection set of components for the memory
framework (<none> means use all components that can be found)
MCA memory: parameter "memory_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the memory framework (0 = no
verbosity)
MCA memory: parameter "memory_ptmalloc2_priority" (current value:
"0", data source: default value)
MCA paffinity: parameter "paffinity_base_verbose" (current value:
"0", data source: default value)
Verbosity level of the paffinity framework
MCA paffinity: parameter "paffinity" (current value: <none>, data
source: default value)
Default selection set of components for the paffinity
framework (<none> means use all components that can be found)
MCA paffinity: parameter "paffinity_linux_priority" (current value:
"10", data source: default value)
Priority of the linux paffinity component
MCA paffinity: information "paffinity_linux_plpa_version" (value:
"1.3rc4", data source: default value)
Version of PLPA that is embedded in Open MPI
MCA carto: parameter "carto_base_verbose" (current value: "0",
data source: default value)
Verbosity level of the carto framework
MCA carto: parameter "carto" (current value: <none>, data
source: default value)
Default selection set of components for the carto
framework (<none> means use all components that can be found)
MCA carto: parameter "carto_auto_detect_priority" (current
value: "11", data source: default value)
Priority of the auto_detect carto component
MCA carto: parameter "carto_file_path" (current value: <none>,
data source: default value)
The path to the cartography file
MCA carto: parameter "carto_file_priority" (current value: "10",
data source: default value)
Priority of the file carto component
MCA maffinity: parameter "maffinity_base_verbose" (current value:
"0", data source: default value)
Verbosity level of the maffinity framework
MCA maffinity: parameter "maffinity" (current value: <none>, data
source: default value)
Default selection set of components for the maffinity
framework (<none> means use all components that can be found)
MCA maffinity: parameter "maffinity_first_use_priority" (current
value: "10", data source: default value)
Priority of the first_use maffinity component
MCA timer: parameter "timer" (current value: <none>, data
source: default value)
Default selection set of components for the timer
framework (<none> means use all components that can be found)
MCA timer: parameter "timer_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the timer framework (0 = no
verbosity)
MCA timer: parameter "timer_linux_priority" (current value: "0",
data source: default value)
MCA dpm: parameter "dpm" (current value: <none>, data source:
default value)
Default selection set of components for the dpm
framework (<none> means use all components that can be found)
MCA dpm: parameter "dpm_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the dpm framework (0 = no
verbosity)
MCA pubsub: parameter "pubsub" (current value: <none>, data
source: default value)
Default selection set of components for the pubsub
framework (<none> means use all components that can be found)
MCA pubsub: parameter "pubsub_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the pubsub framework (0 = no
verbosity)
MCA pubsub: parameter "pubsub_orte_priority" (current value: "0",
data source: default value)
MCA allocator: parameter "allocator" (current value: <none>, data
source: default value)
Default selection set of components for the allocator
framework (<none> means use all components that can be found)
MCA allocator: parameter "allocator_base_verbose" (current value:
"0", data source: default value)
Verbosity level for the allocator framework (0 = no
verbosity)
MCA allocator: parameter "allocator_basic_priority" (current value:
"0", data source: default value)
MCA allocator: parameter "allocator_bucket_num_buckets" (current
value: "30", data source: default value)
MCA allocator: parameter "allocator_bucket_priority" (current value:
"0", data source: default value)
MCA coll: parameter "coll" (current value: <none>, data source:
default value)
Default selection set of components for the coll
framework (<none> means use all components that can be found)
MCA coll: parameter "coll_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the coll framework (0 = no
verbosity)
MCA coll: parameter "coll_basic_priority" (current value: "10",
data source: default value)
Priority of the basic coll component
MCA coll: parameter "coll_basic_crossover" (current value: "4",
data source: default value)
Minimum number of processes in a communicator before
using the logarithmic algorithms
MCA coll: parameter "coll_hierarch_priority" (current value:
"0", data source: default value)
Priority of the hierarchical coll component
MCA coll: parameter "coll_hierarch_verbose" (current value:
"0", data source: default value)
Turn verbose message of the hierarchical coll
component on/off
MCA coll: parameter "coll_hierarch_use_rdma" (current value:
"0", data source: default value)
Switch from the send btl list used to detect
hierarchies to the rdma btl list
MCA coll: parameter "coll_hierarch_ignore_sm" (current value:
"0", data source: default value)
Ignore sm protocol when detecting hierarchies.
Required to enable the usage of protocol specific collective operations
MCA coll: parameter "coll_hierarch_detection_alg" (current
value: "2", data source: default value)
Used to specify the algorithm for detecting
Hierarchy.To specify all levels or two levels of hierarchy
MCA coll: parameter "coll_inter_priority" (current value: "40",
data source: default value)
Priority of the inter coll component
MCA coll: parameter "coll_inter_verbose" (current value: "0",
data source: default value)
Turn verbose message of the inter coll component
on/off
MCA coll: parameter "coll_self_priority" (current value: "75",
data source: default value)
MCA coll: parameter "coll_sm_priority" (current value: "0",
data source: default value)
Priority of the sm coll component
MCA coll: parameter "coll_sm_control_size" (current value:
"4096", data source: default value)
Length of the control data -- should usually be
either the length of a cache line on most SMPs, or the size of a page on
machines that support direct memory affinity page placement (in bytes)
MCA coll: parameter "coll_sm_bootstrap_filename" (current
value: "shared_mem_sm_bootstrap", data source: default value)
Filename (in the Open MPI session directory) of the
coll sm component bootstrap rendezvous mmap file
MCA coll: parameter "coll_sm_bootstrap_num_segments" (current
value: "8", data source: default value)
Number of segments in the bootstrap file
MCA coll: parameter "coll_sm_fragment_size" (current value:
"8192", data source: default value)
Fragment size (in bytes) used for passing data
through shared memory (will be rounded up to the nearest control_size size)
MCA coll: parameter "coll_sm_mpool" (current value: "sm", data
source: default value)
Name of the mpool component to use
MCA coll: parameter "coll_sm_comm_in_use_flags" (current value:
"2", data source: default value)
Number of "in use" flags, used to mark a message
passing area segment as currently being used or not (must be >= 2 and <=
comm_num_segments)
MCA coll: parameter "coll_sm_comm_num_segments" (current value:
"8", data source: default value)
Number of segments in each communicator's shared
memory message passing area (must be >= 2, and must be a multiple of
comm_in_use_flags)
MCA coll: parameter "coll_sm_tree_degree" (current value: "4",
data source: default value)
Degree of the tree for tree-based operations (must be
=> 1 and <= min(control_size, 255))
MCA coll: information "coll_sm_shared_mem_used_bootstrap"
(value: "200", data source: default value)
Amount of shared memory used in the shared memory
bootstrap area (in bytes)
MCA coll: parameter "coll_sm_info_num_procs" (current value:
"4", data source: default value)
Number of processes to use for the calculation of the
shared_mem_size MCA information parameter (must be => 2)
MCA coll: information "coll_sm_shared_mem_used_data" (value:
"548864", data source: default value)
Amount of shared memory used in the shared memory
data area for info_num_procs processes (in bytes)
MCA coll: parameter "coll_sync_priority" (current value: "50",
data source: default value)
Priority of the sync coll component; only relevant if
barrier_before or barrier_after is > 0
MCA coll: parameter "coll_sync_barrier_before" (current value:
"0", data source: default value)
Do a synchronization before each Nth collective
MCA coll: parameter "coll_sync_barrier_after" (current value:
"0", data source: default value)
Do a synchronization after each Nth collective
MCA coll: parameter "coll_tuned_priority" (current value: "30",
data source: default value)
Priority of the tuned coll component
MCA coll: parameter
"coll_tuned_pre_allocate_memory_comm_size_limit" (current value: "32768", data
source: default value)
Size of communicator were we stop pre-allocating
memory for the fixed internal buffer used for message requests etc that is hung
off the communicator data segment. I.e. if you have a 100'000 nodes you might
not want to pre-allocate 200'000 request handle slots per communicator instance!
MCA coll: parameter "coll_tuned_init_tree_fanout" (current
value: "4", data source: default value)
Inital fanout used in the tree topologies for each
communicator. This is only an initial guess, if a tuned collective needs a
different fanout for an operation, it build it dynamically. This parameter is
only for the first guess and might save a little time
MCA coll: parameter "coll_tuned_init_chain_fanout" (current
value: "4", data source: default value)
Inital fanout used in the chain (fanout followed by
pipeline) topologies for each communicator. This is only an initial guess, if a
tuned collective needs a different fanout for an operation, it build it
dynamically. This parameter is only for the first guess and might save a little
time
MCA coll: parameter "coll_tuned_use_dynamic_rules" (current
value: "0", data source: default value)
Switch used to decide if we use static (compiled/if
statements) or dynamic (built at runtime) decision function rules
MCA io: parameter "io_base_freelist_initial_size" (current
value: "16", data source: default value)
Initial MPI-2 IO request freelist size
MCA io: parameter "io_base_freelist_max_size" (current value:
"64", data source: default value)
Max size of the MPI-2 IO request freelist
MCA io: parameter "io_base_freelist_increment" (current
value: "16", data source: default value)
Increment size of the MPI-2 IO request freelist
MCA io: parameter "io" (current value: <none>, data source:
default value)
Default selection set of components for the io
framework (<none> means use all components that can be found)
MCA io: parameter "io_base_verbose" (current value: "0", data
source: default value)
Verbosity level for the io framework (0 = no
verbosity)
MCA io: parameter "io_romio_priority" (current value: "10",
data source: default value)
Priority of the io romio component
MCA io: parameter "io_romio_delete_priority" (current value:
"10", data source: default value)
Delete priority of the io romio component
MCA io: information "io_romio_version" (value: "from MPICH2
v1.0.7 with additional compilation/bug patches from romio-ma...@mcs.anl.gov",
data source: default value)
Version of ROMIO
MCA io: information "io_romio_user_configure_params" (value:
<none>, data source: default value)
User-specified command line parameters passed to
ROMIO's configure script
MCA io: information "io_romio_complete_configure_params"
(value: " CFLAGS='-O3 -DNDEBUG -finline-functions -fno-strict-aliasing
-restrict -pthread' CPPFLAGS=' ' FFLAGS='' LDFLAGS=' ' --enable-shared
--disable-static --prefix=/scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed
--with-mpi=open_mpi --disable-aio", data source: default value)
Complete set of command line parameters passed to
ROMIO's configure script
MCA mpool: parameter "mpool" (current value: <none>, data
source: default value)
Default selection set of components for the mpool
framework (<none> means use all components that can be found)
MCA mpool: parameter "mpool_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the mpool framework (0 = no
verbosity)
MCA mpool: parameter "mpool_fake_priority" (current value: "0",
data source: default value)
MCA mpool: parameter "mpool_rdma_rcache_name" (current value:
"vma", data source: default value)
The name of the registration cache the mpool should
use
MCA mpool: parameter "mpool_rdma_rcache_size_limit" (current
value: "0", data source: default value)
the maximum size of registration cache in bytes. 0 is
unlimited (default 0)
MCA mpool: parameter "mpool_rdma_print_stats" (current value:
"0", data source: default value)
print pool usage statistics at the end of the run
MCA mpool: parameter "mpool_rdma_priority" (current value: "0",
data source: default value)
MCA mpool: parameter "mpool_sm_allocator" (current value:
"bucket", data source: default value)
Name of allocator component to use with sm mpool
MCA mpool: parameter "mpool_sm_min_size" (current value:
"67108864", data source: default value)
Minimum size of the sm mpool shared memory file
MCA mpool: parameter "mpool_sm_verbose" (current value: "0",
data source: default value)
Enable verbose output for mpool sm component
MCA mpool: parameter "mpool_sm_priority" (current value: "0",
data source: default value)
MCA pml: parameter "pml_base_verbose" (current value: "0",
data source: default value)
Verbosity level of the PML framework
MCA pml: parameter "pml" (current value: <none>, data source:
default value)
Default selection set of components for the pml
framework (<none> means use all components that can be found)
MCA pml: parameter "pml_cm_free_list_num" (current value: "4",
data source: default value)
Initial size of request free lists
MCA pml: parameter "pml_cm_free_list_max" (current value:
"-1", data source: default value)
Maximum size of request free lists
MCA pml: parameter "pml_cm_free_list_inc" (current value:
"64", data source: default value)
Number of elements to add when growing request free
lists
MCA pml: parameter "pml_cm_priority" (current value: "30",
data source: default value)
CM PML selection priority
MCA pml: parameter "pml_csum_free_list_num" (current value:
"4", data source: default value)
MCA pml: parameter "pml_csum_free_list_max" (current value:
"-1", data source: default value)
MCA pml: parameter "pml_csum_free_list_inc" (current value:
"64", data source: default value)
MCA pml: parameter "pml_csum_send_pipeline_depth" (current
value: "3", data source: default value)
MCA pml: parameter "pml_csum_recv_pipeline_depth" (current
value: "4", data source: default value)
MCA pml: parameter "pml_csum_rdma_put_retries_limit" (current
value: "5", data source: default value)
MCA pml: parameter "pml_csum_max_rdma_per_request" (current
value: "4", data source: default value)
MCA pml: parameter "pml_csum_max_send_per_range" (current
value: "4", data source: default value)
MCA pml: parameter "pml_csum_unexpected_limit" (current value:
"128", data source: default value)
MCA pml: parameter "pml_csum_allocator" (current value:
"bucket", data source: default value)
Name of allocator component for unexpected messages
MCA pml: parameter "pml_csum_priority" (current value: "0",
data source: default value)
MCA pml: parameter "pml_ob1_free_list_num" (current value:
"4", data source: default value)
MCA pml: parameter "pml_ob1_free_list_max" (current value:
"-1", data source: default value)
MCA pml: parameter "pml_ob1_free_list_inc" (current value:
"64", data source: default value)
MCA pml: parameter "pml_ob1_priority" (current value: "20",
data source: default value)
MCA pml: parameter "pml_ob1_send_pipeline_depth" (current
value: "3", data source: default value)
MCA pml: parameter "pml_ob1_recv_pipeline_depth" (current
value: "4", data source: default value)
MCA pml: parameter "pml_ob1_rdma_put_retries_limit" (current
value: "5", data source: default value)
MCA pml: parameter "pml_ob1_max_rdma_per_request" (current
value: "4", data source: default value)
MCA pml: parameter "pml_ob1_max_send_per_range" (current
value: "4", data source: default value)
MCA pml: parameter "pml_ob1_unexpected_limit" (current value:
"128", data source: default value)
MCA pml: parameter "pml_ob1_allocator" (current value:
"bucket", data source: default value)
Name of allocator component for unexpected messages
MCA pml: parameter "pml_v_priority" (current value: "-1", data
source: default value)
MCA pml: parameter "pml_v_output" (current value: "stderr",
data source: default value)
MCA pml: parameter "pml_v_verbose" (current value: "0", data
source: default value)
MCA bml: parameter "bml" (current value: <none>, data source:
default value)
Default selection set of components for the bml
framework (<none> means use all components that can be found)
MCA bml: parameter "bml_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the bml framework (0 = no
verbosity)
MCA bml: parameter "bml_r2_show_unreach_errors" (current
value: "1", data source: default value)
Show error message when procs are unreachable
MCA bml: parameter "bml_r2_priority" (current value: "0", data
source: default value)
MCA rcache: parameter "rcache" (current value: <none>, data
source: default value)
Default selection set of components for the rcache
framework (<none> means use all components that can be found)
MCA rcache: parameter "rcache_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the rcache framework (0 = no
verbosity)
MCA rcache: parameter "rcache_vma_priority" (current value: "0",
data source: default value)
MCA btl: parameter "btl_base_verbose" (current value: "0",
data source: default value)
Verbosity level of the BTL framework
MCA btl: parameter "btl" (current value: <none>, data source:
default value)
Default selection set of components for the btl
framework (<none> means use all components that can be found)
MCA btl: parameter "btl_ofud_max_btls" (current value: "4",
data source: default value)
Maximum number of HCAs/ports to use
MCA btl: parameter "btl_ofud_mpool" (current value: "rdma",
data source: default value)
Name of the memory pool to be used
MCA btl: parameter "btl_ofud_ib_pkey_index" (current value:
"0", data source: default value)
IB pkey index
MCA btl: parameter "btl_ofud_ib_qkey" (current value:
"20119859", data source: default value)
IB qkey
MCA btl: parameter "btl_ofud_ib_service_level" (current value:
"0", data source: default value)
IB service level
MCA btl: parameter "btl_ofud_ib_src_path_bits" (current value:
"0", data source: default value)
IB source path bits
MCA btl: parameter "btl_ofud_sd_num" (current value: "128",
data source: default value)
maximum send descriptors to post
MCA btl: parameter "btl_ofud_rd_num" (current value: "6000",
data source: default value)
number of receive buffers
MCA btl: parameter "btl_ofud_min_send_size" (current value:
"2048", data source: default value)
minimum send size
MCA btl: parameter "btl_ofud_max_send_size" (current value:
"2048", data source: default value)
maximum send size
MCA btl: parameter "btl_ofud_exclusivity" (current value:
"1024", data source: default value)
BTL exclusivity
MCA btl: parameter "btl_ofud_bandwidth" (current value: "800",
data source: default value)
Approximate maximum bandwidth of interconnect
MCA btl: parameter "btl_ofud_priority" (current value: "0",
data source: default value)
MCA btl: parameter "btl_openib_verbose" (current value: "0",
data source: default value)
Output some verbose OpenIB BTL information (0 = no
output, nonzero = output)
MCA btl: parameter "btl_openib_warn_no_device_params_found"
(current value: "1", data source: default value, synonyms:
btl_openib_warn_no_hca_params_found)
Warn when no device-specific parameters are found in
the INI file specified by the btl_openib_device_param_files MCA parameter (0 =
do not warn; any other value = warn)
MCA btl: parameter "btl_openib_warn_no_hca_params_found"
(current value: "1", data source: default value, deprecated, synonym of:
btl_openib_warn_no_device_params_found)
Warn when no device-specific parameters are found in
the INI file specified by the btl_openib_device_param_files MCA parameter (0 =
do not warn; any other value = warn)
MCA btl: parameter "btl_openib_warn_default_gid_prefix"
(current value: "1", data source: default value)
Warn when there is more than one active ports and at
least one of them connected to the network with only default GID prefix
configured (0 = do not warn; any other value = warn)
MCA btl: parameter "btl_openib_warn_nonexistent_if" (current
value: "1", data source: default value)
Warn if non-existent devices and/or ports are
specified in the btl_openib_if_[in|ex]clude MCA parameters (0 = do not warn;
any other value = warn)
MCA btl: parameter "btl_openib_want_fork_support" (current
value: "-1", data source: default value)
Whether fork support is desired or not (negative =
try to enable fork support, but continue even if it is not available, 0 = do
not enable fork support, positive = try to enable fork support and fail if it
is not available)
MCA btl: parameter "btl_openib_device_param_files" (current
value:
"/scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/share/openmpi/mca-btl-openib-device-params.ini",
data source: default value, synonyms: btl_openib_hca_param_files)
Colon-delimited list of INI-style files that contain
device vendor/part-specific parameters
MCA btl: parameter "btl_openib_hca_param_files" (current
value:
"/scinet/gpc/mpi/openmpi/1.3.2-intel-v11.0-ofed/share/openmpi/mca-btl-openib-device-params.ini",
data source: default value, deprecated, synonym of:
btl_openib_device_param_files)
Colon-delimited list of INI-style files that contain
device vendor/part-specific parameters
MCA btl: parameter "btl_openib_device_type" (current value:
"all", data source: default value)
Specify to only use IB or iWARP network adapters
(infiniband = only use InfiniBand HCAs; iwarp = only use iWARP NICs; all = use
any available adapters)
MCA btl: parameter "btl_openib_max_btls" (current value: "-1",
data source: default value)
Maximum number of device ports to use (-1 = use all
available, otherwise must be >= 1)
MCA btl: parameter "btl_openib_free_list_num" (current value:
"8", data source: default value)
Intial size of free lists (must be >= 1)
MCA btl: parameter "btl_openib_free_list_max" (current value:
"-1", data source: default value)
Maximum size of free lists (-1 = infinite, otherwise
must be >= 0)
MCA btl: parameter "btl_openib_free_list_inc" (current value:
"32", data source: default value)
Increment size of free lists (must be >= 1)
MCA btl: parameter "btl_openib_mpool" (current value: "rdma",
data source: default value)
Name of the memory pool to be used (it is unlikely
that you will ever want to change this
MCA btl: parameter "btl_openib_reg_mru_len" (current value:
"16", data source: default value)
Length of the registration cache most recently used
list (must be >= 1)
MCA btl: parameter "btl_openib_cq_size" (current value:
"1000", data source: default value, synonyms: btl_openib_ib_cq_size)
Size of the OpenFabrics completion queue (will
automatically be set to a minimum of (2 * number_of_peers * btl_openib_rd_num))
MCA btl: parameter "btl_openib_ib_cq_size" (current value:
"1000", data source: default value, deprecated, synonym of: btl_openib_cq_size)
Size of the OpenFabrics completion queue (will
automatically be set to a minimum of (2 * number_of_peers * btl_openib_rd_num))
MCA btl: parameter "btl_openib_max_inline_data" (current
value: "-1", data source: default value, synonyms:
btl_openib_ib_max_inline_data)
Maximum size of inline data segment (-1 = run-time
probe to discover max value, otherwise must be >= 0). If not explicitly set,
use max_inline_data from the INI file containing device-specific parameters
MCA btl: parameter "btl_openib_ib_max_inline_data" (current
value: "-1", data source: default value, deprecated, synonym of:
btl_openib_max_inline_data)
Maximum size of inline data segment (-1 = run-time
probe to discover max value, otherwise must be >= 0). If not explicitly set,
use max_inline_data from the INI file containing device-specific parameters
MCA btl: parameter "btl_openib_pkey" (current value: "0", data
source: default value, synonyms: btl_openib_ib_pkey_val)
OpenFabrics partition key (pkey) value. Unsigned
integer decimal or hex values are allowed (e.g., "3" or "0x3f") and will be
masked against the maximum allowable IB paritition key value (0x7fff)
MCA btl: parameter "btl_openib_ib_pkey_val" (current value:
"0", data source: default value, deprecated, synonym of: btl_openib_pkey)
OpenFabrics partition key (pkey) value. Unsigned
integer decimal or hex values are allowed (e.g., "3" or "0x3f") and will be
masked against the maximum allowable IB paritition key value (0x7fff)
MCA btl: parameter "btl_openib_psn" (current value: "0", data
source: default value, synonyms: btl_openib_ib_psn)
OpenFabrics packet sequence starting number (must be
>= 0)
MCA btl: parameter "btl_openib_ib_psn" (current value: "0",
data source: default value, deprecated, synonym of: btl_openib_psn)
OpenFabrics packet sequence starting number (must be
>= 0)
MCA btl: parameter "btl_openib_ib_qp_ous_rd_atom" (current
value: "4", data source: default value)
InfiniBand outstanding atomic reads (must be >= 0)
MCA btl: parameter "btl_openib_mtu" (current value: "3", data
source: default value, synonyms: btl_openib_ib_mtu)
OpenFabrics MTU, in bytes (if not specified in INI
files). Valid values are: 1=256 bytes, 2=512 bytes, 3=1024 bytes, 4=2048
bytes, 5=4096 bytes
MCA btl: parameter "btl_openib_ib_mtu" (current value: "3",
data source: default value, deprecated, synonym of: btl_openib_mtu)
OpenFabrics MTU, in bytes (if not specified in INI
files). Valid values are: 1=256 bytes, 2=512 bytes, 3=1024 bytes, 4=2048
bytes, 5=4096 bytes
MCA btl: parameter "btl_openib_ib_min_rnr_timer" (current
value: "25", data source: default value)
InfiniBand minimum "receiver not ready" timer, in
seconds (must be >= 0 and <= 31)
MCA btl: parameter "btl_openib_ib_timeout" (current value:
"20", data source: default value)
InfiniBand transmit timeout, plugged into formula:
4.096 microseconds * (2^btl_openib_ib_timeout)(must be >= 0 and <= 31)
MCA btl: parameter "btl_openib_ib_retry_count" (current value:
"7", data source: default value)
InfiniBand transmit retry count (must be >= 0 and <=
7)
MCA btl: parameter "btl_openib_ib_rnr_retry" (current value:
"7", data source: default value)
InfiniBand "receiver not ready" retry count; applies
*only* to SRQ/XRC queues. PP queues use RNR retry values of 0 because Open MPI
performs software flow control to guarantee that RNRs never occur (must be >= 0
and <= 7; 7 = "infinite")
MCA btl: parameter "btl_openib_ib_max_rdma_dst_ops" (current
value: "4", data source: default value)
InfiniBand maximum pending RDMA destination
operations (must be >= 0)
MCA btl: parameter "btl_openib_ib_service_level" (current
value: "0", data source: default value)
InfiniBand service level (must be >= 0 and <= 15)
MCA btl: parameter "btl_openib_use_eager_rdma" (current value:
"-1", data source: default value)
Use RDMA for eager messages (-1 = use device default,
0 = do not use eager RDMA, 1 = use eager RDMA)
MCA btl: parameter "btl_openib_eager_rdma_threshold" (current
value: "16", data source: default value)
Use RDMA for short messages after this number of
messages are received from a given peer (must be >= 1)
MCA btl: parameter "btl_openib_max_eager_rdma" (current value:
"16", data source: default value)
Maximum number of peers allowed to use RDMA for short
messages (RDMA is used for all long messages, except if explicitly disabled,
such as with the "dr" pml) (must be >= 0)
MCA btl: parameter "btl_openib_eager_rdma_num" (current value:
"16", data source: default value)
Number of RDMA buffers to allocate for small
messages(must be >= 1)
MCA btl: parameter "btl_openib_btls_per_lid" (current value:
"1", data source: default value)
Number of BTLs to create for each InfiniBand LID
(must be >= 1)
MCA btl: parameter "btl_openib_max_lmc" (current value: "0",
data source: default value)
Maximum number of LIDs to use for each device port
(must be >= 0, where 0 = use all available)
MCA btl: parameter "btl_openib_enable_apm_over_lmc" (current
value: "0", data source: default value)
Maximum number of alterative paths for each device
port (must be >= -1, where 0 = disable apm, -1 = all availible alternative
paths )
MCA btl: parameter "btl_openib_enable_apm_over_ports" (current
value: "0", data source: default value)
Enable alterative path migration (APM) over different
ports of the same device (must be >= 0, where 0 = disable APM over ports , 1 =
enable APM over ports of the same device)
MCA btl: parameter "btl_openib_use_async_event_thread"
(current value: "1", data source: default value)
If nonzero, use the thread that will handle
InfiniBand asyncihronous events
MCA btl: parameter "btl_openib_buffer_alignment" (current
value: "64", data source: default value)
Prefered communication buffer alignment, in bytes
(must be > 0 and power of two)
MCA btl: parameter "btl_openib_use_message_coalescing"
(current value: "1", data source: default value)
Use message coalescing
MCA btl: parameter "btl_openib_cq_poll_ratio" (current value:
"100", data source: default value)
how often poll high priority CQ versus low priority CQ
MCA btl: parameter "btl_openib_eager_rdma_poll_ratio" (current
value: "100", data source: default value)
how often poll eager RDMA channel versus CQ
MCA btl: parameter "btl_openib_hp_cq_poll_per_progress"
(current value: "10", data source: default value)
max number of completion events to process for each
call of BTL progress engine
MCA btl: information "btl_openib_have_fork_support" (value:
"1", data source: default value)
Whether the OpenFabrics stack supports applications
that invoke the "fork()" system call or not (0 = no, 1 = yes). Note that this
value does NOT indicate whether the system being run on supports "fork()" with
OpenFabrics applications or not.
MCA btl: parameter "btl_openib_exclusivity" (current value:
"1024", data source: default value)
BTL exclusivity (must be >= 0)
MCA btl: parameter "btl_openib_flags" (current value: "310",
data source: default value)
BTL bit flags (general flags: SEND=1, PUT=2, GET=4,
SEND_INPLACE=8, RDMA_MATCHED=64, HETEROGENEOUS_RDMA=256; flags only used by the
"dr" PML (ignored by others): ACK=16, CHECKSUM=32, RDMA_COMPLETION=128)
MCA btl: parameter "btl_openib_rndv_eager_limit" (current
value: "12288", data source: default value)
Size (in bytes) of "phase 1" fragment sent for all
large messages (must be >= 0 and <= eager_limit)
MCA btl: parameter "btl_openib_eager_limit" (current value:
"12288", data source: default value)
Maximum size (in bytes) of "short" messages (must be
>= 1).
MCA btl: parameter "btl_openib_max_send_size" (current value:
"65536", data source: default value)
Maximum size (in bytes) of a single "phase 2"
fragment of a long message when using the pipeline protocol (must be >= 1)
MCA btl: parameter "btl_openib_rdma_pipeline_send_length"
(current value: "1048576", data source: default value)
Length of the "phase 2" portion of a large message
(in bytes) when using the pipeline protocol. This part of the message will be
split into fragments of size max_send_size and sent using send/receive
semantics (must be >= 0; only relevant when the PUT flag is set)
MCA btl: parameter "btl_openib_rdma_pipeline_frag_size"
(current value: "1048576", data source: default value)
Maximum size (in bytes) of a single "phase 3"
fragment from a long message when using the pipeline protocol. These fragments
will be sent using RDMA semantics (must be >= 1; only relevant when the PUT
flag is set)
MCA btl: parameter "btl_openib_min_rdma_pipeline_size"
(current value: "262144", data source: default value)
Messages smaller than this size (in bytes) will not
use the RDMA pipeline protocol. Instead, they will be split into fragments of
max_send_size and sent using send/receive semantics (must be >=0, and is
automatically adjusted up to at least
(eager_limit+btl_rdma_pipeline_send_length); only relevant when the PUT flag is
set)
MCA btl: parameter "btl_openib_bandwidth" (current value:
"800", data source: default value)
Approximate maximum bandwidth of interconnect(must be
>= 1)
MCA btl: parameter "btl_openib_latency" (current value: "10",
data source: default value)
Approximate latency of interconnect (must be >= 0)
MCA btl: parameter "btl_openib_receive_queues" (current value:
"P,128,256,192,128:S,2048,256,128,32:S,12288,256,128,32:S,65536,256,128,32",
data source: default value)
Colon-delimited, comma delimited list of receive
queues: P,4096,8,6,4:P,32768,8,6,4
MCA btl: parameter "btl_openib_if_include" (current value:
<none>, data source: default value)
Comma-delimited list of devices/ports to be used
(e.g. "mthca0,mthca1:2"; empty value means to use all ports found). Mutually
exclusive with btl_openib_if_exclude.
MCA btl: parameter "btl_openib_if_exclude" (current value:
<none>, data source: default value)
Comma-delimited list of device/ports to be excluded
(empty value means to not exclude any ports). Mutually exclusive with
btl_openib_if_include.
MCA btl: parameter "btl_openib_ipaddr_include" (current value:
<none>, data source: default value)
Comma-delimited list of IP Addresses to be used (e.g.
"192.168.1.0/24"). Mutually exclusive with btl_openib_ipaddr_exclude.
MCA btl: parameter "btl_openib_ipaddr_exclude" (current value:
<none>, data source: default value)
Comma-delimited list of IP Addresses to be excluded
(e.g. "192.168.1.0/24"). Mutually exclusive with btl_openib_ipaddr_include.
MCA btl: parameter "btl_openib_cpc_include" (current value:
<none>, data source: default value)
Method used to select OpenFabrics connections (valid
values: oob,rdmacm)
MCA btl: parameter "btl_openib_cpc_exclude" (current value:
<none>, data source: default value)
Method used to exclude OpenFabrics connections (valid
values: oob,rdmacm)
MCA btl: parameter "btl_openib_connect_oob_priority" (current
value: "50", data source: default value)
The selection method priority for oob
MCA btl: parameter "btl_openib_connect_rdmacm_priority"
(current value: "30", data source: default value)
The selection method priority for rdma_cm
MCA btl: parameter "btl_openib_connect_rdmacm_port" (current
value: "0", data source: default value)
The selection method port for rdma_cm
MCA btl: parameter "btl_openib_connect_rdmacm_resolve_timeout"
(current value: "2000", data source: default value)
The timeout (in miliseconds) for address and route
resolution
MCA btl: parameter
"btl_openib_connect_rdmacm_reject_causes_connect_error" (current value: "0",
data source: default value)
The drivers for some devices are buggy such that an
RDMA REJECT action may result in a CONNECT_ERROR event instead of a REJECTED
event. Setting this MCA parameter to true tells Open MPI to treat
CONNECT_ERROR events on connections where a REJECT is expected as a REJECT
(default: false)
MCA btl: parameter "btl_openib_priority" (current value: "0",
data source: default value)
MCA btl: parameter "btl_self_free_list_num" (current value:
"0", data source: default value)
Number of fragments by default
MCA btl: parameter "btl_self_free_list_max" (current value:
"-1", data source: default value)
Maximum number of fragments
MCA btl: parameter "btl_self_free_list_inc" (current value:
"32", data source: default value)
Increment by this number of fragments
MCA btl: parameter "btl_self_exclusivity" (current value:
"65536", data source: default value)
BTL exclusivity (must be >= 0)
MCA btl: parameter "btl_self_flags" (current value: "10", data
source: default value)
BTL bit flags (general flags: SEND=1, PUT=2, GET=4,
SEND_INPLACE=8, RDMA_MATCHED=64, HETEROGENEOUS_RDMA=256; flags only used by the
"dr" PML (ignored by others): ACK=16, CHECKSUM=32, RDMA_COMPLETION=128)
MCA btl: parameter "btl_self_rndv_eager_limit" (current value:
"131072", data source: default value)
Size (in bytes) of "phase 1" fragment sent for all
large messages (must be >= 0 and <= eager_limit)
MCA btl: parameter "btl_self_eager_limit" (current value:
"131072", data source: default value)
Maximum size (in bytes) of "short" messages (must be
>= 1).
MCA btl: parameter "btl_self_max_send_size" (current value:
"262144", data source: default value)
Maximum size (in bytes) of a single "phase 2"
fragment of a long message when using the pipeline protocol (must be >= 1)
MCA btl: parameter "btl_self_rdma_pipeline_send_length"
(current value: "2147483647", data source: default value)
Length of the "phase 2" portion of a large message
(in bytes) when using the pipeline protocol. This part of the message will be
split into fragments of size max_send_size and sent using send/receive
semantics (must be >= 0; only relevant when the PUT flag is set)
MCA btl: parameter "btl_self_rdma_pipeline_frag_size" (current
value: "2147483647", data source: default value)
Maximum size (in bytes) of a single "phase 3"
fragment from a long message when using the pipeline protocol. These fragments
will be sent using RDMA semantics (must be >= 1; only relevant when the PUT
flag is set)
MCA btl: parameter "btl_self_min_rdma_pipeline_size" (current
value: "0", data source: default value)
Messages smaller than this size (in bytes) will not
use the RDMA pipeline protocol. Instead, they will be split into fragments of
max_send_size and sent using send/receive semantics (must be >=0, and is
automatically adjusted up to at least
(eager_limit+btl_rdma_pipeline_send_length); only relevant when the PUT flag is
set)
MCA btl: parameter "btl_self_bandwidth" (current value: "100",
data source: default value)
Approximate maximum bandwidth of interconnect(must be
>= 1)
MCA btl: parameter "btl_self_latency" (current value: "0",
data source: default value)
Approximate latency of interconnect (must be >= 0)
MCA btl: parameter "btl_self_priority" (current value: "0",
data source: default value)
MCA btl: parameter "btl_sm_free_list_num" (current value: "8",
data source: default value)
MCA btl: parameter "btl_sm_free_list_max" (current value:
"-1", data source: default value)
MCA btl: parameter "btl_sm_free_list_inc" (current value:
"64", data source: default value)
MCA btl: parameter "btl_sm_max_procs" (current value: "-1",
data source: default value)
MCA btl: parameter "btl_sm_mpool" (current value: "sm", data
source: default value)
MCA btl: parameter "btl_sm_fifo_size" (current value: "4096",
data source: default value)
MCA btl: parameter "btl_sm_num_fifos" (current value: "1",
data source: default value)
MCA btl: parameter "btl_sm_fifo_lazy_free" (current value:
"120", data source: default value)
MCA btl: parameter "btl_sm_sm_extra_procs" (current value:
"0", data source: default value)
MCA btl: parameter "btl_sm_exclusivity" (current value:
"65535", data source: default value)
BTL exclusivity (must be >= 0)
MCA btl: parameter "btl_sm_flags" (current value: "1", data
source: default value)
BTL bit flags (general flags: SEND=1, PUT=2, GET=4,
SEND_INPLACE=8, RDMA_MATCHED=64, HETEROGENEOUS_RDMA=256; flags only used by the
"dr" PML (ignored by others): ACK=16, CHECKSUM=32, RDMA_COMPLETION=128)
MCA btl: parameter "btl_sm_rndv_eager_limit" (current value:
"4096", data source: default value)
Size (in bytes) of "phase 1" fragment sent for all
large messages (must be >= 0 and <= eager_limit)
MCA btl: parameter "btl_sm_eager_limit" (current value:
"4096", data source: default value)
Maximum size (in bytes) of "short" messages (must be
>= 1).
MCA btl: parameter "btl_sm_max_send_size" (current value:
"32768", data source: default value)
Maximum size (in bytes) of a single "phase 2"
fragment of a long message when using the pipeline protocol (must be >= 1)
MCA btl: parameter "btl_sm_bandwidth" (current value: "900",
data source: default value)
Approximate maximum bandwidth of interconnect(must be
>= 1)
MCA btl: parameter "btl_sm_latency" (current value: "100",
data source: default value)
Approximate latency of interconnect (must be >= 0)
MCA btl: parameter "btl_sm_priority" (current value: "0", data
source: default value)
MCA btl: parameter "btl_tcp_links" (current value: "1", data
source: default value)
MCA btl: parameter "btl_tcp_if_include" (current value:
<none>, data source: default value)
MCA btl: parameter "btl_tcp_if_exclude" (current value: "lo",
data source: default value)
MCA btl: parameter "btl_tcp_free_list_num" (current value:
"8", data source: default value)
MCA btl: parameter "btl_tcp_free_list_max" (current value:
"-1", data source: default value)
MCA btl: parameter "btl_tcp_free_list_inc" (current value:
"32", data source: default value)
MCA btl: parameter "btl_tcp_sndbuf" (current value: "131072",
data source: default value)
MCA btl: parameter "btl_tcp_rcvbuf" (current value: "131072",
data source: default value)
MCA btl: parameter "btl_tcp_endpoint_cache" (current value:
"30720", data source: default value)
The size of the internal cache for each TCP
connection. This cache is used to reduce the number of syscalls, by replacing
them with memcpy. Every read will read the expected data plus the amount of the
endpoint_cache
MCA btl: parameter "btl_tcp_use_nagle" (current value: "0",
data source: default value)
Whether to use Nagle's algorithm or not (using
Nagle's algorithm may increase short message latency)
MCA btl: parameter "btl_tcp_port_min_v4" (current value: "0",
data source: default value)
The minimum port where the TCP BTL will try to bind
(default 0)
MCA btl: parameter "btl_tcp_port_range_v4" (current value:
"65535", data source: default value)
The number of ports where the TCP BTL will try to
bind (default 64K). This parameter together with the port min, define a range
of ports where Open MPI will open sockets.
MCA btl: parameter "btl_tcp_port_min_v6" (current value: "0",
data source: default value)
The minimum port where the TCP BTL will try to bind
(default 0)
MCA btl: parameter "btl_tcp_port_range_v6" (current value:
"65535", data source: default value)
The number of ports where the TCP BTL will try to
bind (default 64K). This parameter together with the port min, define a range
of ports where Open MPI will open sockets.
MCA btl: parameter "btl_tcp_exclusivity" (current value:
"100", data source: default value)
BTL exclusivity (must be >= 0)
MCA btl: parameter "btl_tcp_flags" (current value: "314", data
source: default value)
BTL bit flags (general flags: SEND=1, PUT=2, GET=4,
SEND_INPLACE=8, RDMA_MATCHED=64, HETEROGENEOUS_RDMA=256; flags only used by the
"dr" PML (ignored by others): ACK=16, CHECKSUM=32, RDMA_COMPLETION=128)
MCA btl: parameter "btl_tcp_rndv_eager_limit" (current value:
"65536", data source: default value)
Size (in bytes) of "phase 1" fragment sent for all
large messages (must be >= 0 and <= eager_limit)
MCA btl: parameter "btl_tcp_eager_limit" (current value:
"65536", data source: default value)
Maximum size (in bytes) of "short" messages (must be
>= 1).
MCA btl: parameter "btl_tcp_max_send_size" (current value:
"131072", data source: default value)
Maximum size (in bytes) of a single "phase 2"
fragment of a long message when using the pipeline protocol (must be >= 1)
MCA btl: parameter "btl_tcp_rdma_pipeline_send_length"
(current value: "131072", data source: default value)
Length of the "phase 2" portion of a large message
(in bytes) when using the pipeline protocol. This part of the message will be
split into fragments of size max_send_size and sent using send/receive
semantics (must be >= 0; only relevant when the PUT flag is set)
MCA btl: parameter "btl_tcp_rdma_pipeline_frag_size" (current
value: "2147483647", data source: default value)
Maximum size (in bytes) of a single "phase 3"
fragment from a long message when using the pipeline protocol. These fragments
will be sent using RDMA semantics (must be >= 1; only relevant when the PUT
flag is set)
MCA btl: parameter "btl_tcp_min_rdma_pipeline_size" (current
value: "0", data source: default value)
Messages smaller than this size (in bytes) will not
use the RDMA pipeline protocol. Instead, they will be split into fragments of
max_send_size and sent using send/receive semantics (must be >=0, and is
automatically adjusted up to at least
(eager_limit+btl_rdma_pipeline_send_length); only relevant when the PUT flag is
set)
MCA btl: parameter "btl_tcp_bandwidth" (current value: "100",
data source: default value)
Approximate maximum bandwidth of interconnect(must be
>= 1)
MCA btl: parameter "btl_tcp_latency" (current value: "100",
data source: default value)
Approximate latency of interconnect (must be >= 0)
MCA btl: parameter "btl_tcp_disable_family" (current value:
"0", data source: default value)
MCA btl: parameter "btl_tcp_priority" (current value: "0",
data source: default value)
MCA btl: parameter "btl_base_include" (current value: <none>,
data source: default value)
MCA btl: parameter "btl_base_exclude" (current value: <none>,
data source: default value)
MCA btl: parameter "btl_base_warn_component_unused" (current
value: "1", data source: default value)
This parameter is used to turn on warning messages
when certain NICs are not used
MCA mtl: parameter "mtl" (current value: <none>, data source:
default value)
Default selection set of components for the mtl
framework (<none> means use all components that can be found)
MCA mtl: parameter "mtl_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the mtl framework (0 = no
verbosity)
MCA topo: parameter "topo" (current value: <none>, data source:
default value)
Default selection set of components for the topo
framework (<none> means use all components that can be found)
MCA topo: parameter "topo_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the topo framework (0 = no
verbosity)
MCA topo: parameter "topo_unity_priority" (current value: "0",
data source: default value)
MCA osc: parameter "osc" (current value: <none>, data source:
default value)
Default selection set of components for the osc
framework (<none> means use all components that can be found)
MCA osc: parameter "osc_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the osc framework (0 = no
verbosity)
MCA osc: parameter "osc_pt2pt_no_locks" (current value: "0",
data source: default value)
Enable optimizations available only if MPI_LOCK is
not used.
MCA osc: parameter "osc_pt2pt_eager_limit" (current value:
"16384", data source: default value)
Max size of eagerly sent data
MCA osc: parameter "osc_pt2pt_priority" (current value: "0",
data source: default value)
MCA osc: parameter "osc_rdma_eager_send" (current value: "1",
data source: default value)
Attempt to start data movement during communication
call, instead of at synchrnoization time. Info key of same name overrides this
value.
MCA osc: parameter "osc_rdma_use_buffers" (current value: "0",
data source: default value)
Coalesce messages during an epoch to reduce network
utilization. Info key of same name overrides this value.
MCA osc: parameter "osc_rdma_use_rdma" (current value: "0",
data source: default value)
Use real RDMA operations to transfer data. Info key
of same name overrides this value.
MCA osc: parameter "osc_rdma_rdma_completion_wait" (current
value: "1", data source: default value)
Wait for all completion of rdma events before sending
acknowledgment. Info key of same name overrides this value.
MCA osc: parameter "osc_rdma_no_locks" (current value: "0",
data source: default value)
Enable optimizations available only if MPI_LOCK is
not used. Info key of same name overrides this value.
MCA osc: parameter "osc_rdma_priority" (current value: "0",
data source: default value)
MCA iof: parameter "iof" (current value: <none>, data source:
default value)
Default selection set of components for the iof
framework (<none> means use all components that can be found)
MCA iof: parameter "iof_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the iof framework (0 = no
verbosity)
MCA iof: parameter "iof_hnp_priority" (current value: "0",
data source: default value)
MCA iof: parameter "iof_orted_priority" (current value: "0",
data source: default value)
MCA iof: parameter "iof_tool_priority" (current value: "0",
data source: default value)
MCA oob: parameter "oob" (current value: <none>, data source:
default value)
Default selection set of components for the oob
framework (<none> means use all components that can be found)
MCA oob: parameter "oob_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the oob framework (0 = no
verbosity)
MCA oob: parameter "oob_tcp_verbose" (current value: "0", data
source: default value)
Verbose level for the OOB tcp component
MCA oob: parameter "oob_tcp_peer_limit" (current value: "-1",
data source: default value)
Maximum number of peer connections to simultaneously
maintain (-1 = infinite)
MCA oob: parameter "oob_tcp_peer_retries" (current value:
"60", data source: default value)
Number of times to try shutting down a connection
before giving up
MCA oob: parameter "oob_tcp_debug" (current value: "0", data
source: default value)
Enable (1) / disable (0) debugging output for this
component
MCA oob: parameter "oob_tcp_sndbuf" (current value: "131072",
data source: default value)
TCP socket send buffering size (in bytes)
MCA oob: parameter "oob_tcp_rcvbuf" (current value: "131072",
data source: default value)
TCP socket receive buffering size (in bytes)
MCA oob: parameter "oob_tcp_if_include" (current value:
<none>, data source: default value)
Comma-delimited list of TCP interfaces to use
MCA oob: parameter "oob_tcp_if_exclude" (current value:
<none>, data source: default value)
Comma-delimited list of TCP interfaces to exclude
MCA oob: parameter "oob_tcp_connect_sleep" (current value:
"1", data source: default value)
Enable (1) / disable (0) random sleep for connection
wireup.
MCA oob: parameter "oob_tcp_listen_mode" (current value:
"event", data source: default value)
Mode for HNP to accept incoming connections: event,
listen_thread.
MCA oob: parameter "oob_tcp_listen_thread_max_queue" (current
value: "10", data source: default value)
High water mark for queued accepted socket list size.
Used only when listen_mode is listen_thread.
MCA oob: parameter "oob_tcp_listen_thread_wait_time" (current
value: "10", data source: default value)
Time in milliseconds to wait before actively checking
for new connections when listen_mode is listen_thread.
MCA oob: parameter "oob_tcp_port_min_v4" (current value: "0",
data source: default value)
Starting port allowed (IPv4)
MCA oob: parameter "oob_tcp_port_range_v4" (current value:
"65535", data source: default value)
Range of allowed ports (IPv4)
MCA oob: parameter "oob_tcp_disable_family" (current value:
"0", data source: default value)
Disable IPv4 (4) or IPv6 (6)
MCA oob: parameter "oob_tcp_port_min_v6" (current value: "0",
data source: default value)
Starting port allowed (IPv6)
MCA oob: parameter "oob_tcp_port_range_v6" (current value:
"65535", data source: default value)
Range of allowed ports (IPv6)
MCA oob: parameter "oob_tcp_priority" (current value: "0",
data source: default value)
MCA odls: parameter "odls_base_sigkill_timeout" (current value:
"1", data source: default value)
Time to wait for a process to die after issuing a
kill signal to it
MCA odls: parameter "odls" (current value: <none>, data source:
default value)
Default selection set of components for the odls
framework (<none> means use all components that can be found)
MCA odls: parameter "odls_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the odls framework (0 = no
verbosity)
MCA odls: parameter "odls_default_priority" (current value:
"0", data source: default value)
MCA ras: parameter "ras_base_display_alloc" (current value:
"0", data source: default value)
Whether to display the allocation after it is
determined
MCA ras: parameter "ras_base_display_devel_alloc" (current
value: "0", data source: default value)
Whether to display a developer-detail allocation
after it is determined
MCA ras: parameter "ras" (current value: <none>, data source:
default value)
Default selection set of components for the ras
framework (<none> means use all components that can be found)
MCA ras: parameter "ras_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the ras framework (0 = no
verbosity)
MCA ras: parameter "ras_slurm_priority" (current value: "75",
data source: default value)
Priority of the slurm ras component
MCA rmaps: parameter "rmaps_base_schedule_policy" (current
value: "unspec", data source: default value)
Scheduling Policy for RMAPS. [slot | node]
MCA rmaps: parameter "rmaps_base_pernode" (current value: "0",
data source: default value)
Launch one ppn as directed
MCA rmaps: parameter "rmaps_base_n_pernode" (current value: "0",
data source: default value)
Launch n procs/node
MCA rmaps: parameter "rmaps_base_slot_list" (current value:
<none>, data source: default value)
List of processor IDs to bind MPI processes to (e.g.,
used in conjunction with rank files) [default=NULL]
MCA rmaps: parameter "rmaps_base_no_schedule_local" (current
value: "0", data source: default value)
If false, allow scheduling MPI applications on the
same node as mpirun (default). If true, do not schedule any MPI applications
on the same node as mpirun
MCA rmaps: parameter "rmaps_base_no_oversubscribe" (current
value: "0", data source: default value)
If true, then do not allow oversubscription of nodes
- mpirun will return an error if there aren't enough nodes to launch all
processes without oversubscribing
MCA rmaps: parameter "rmaps_base_loadbalance" (current value:
"0", data source: default value)
Balance total number of procs across all allocated
nodes
MCA rmaps: parameter "rmaps_base_display_map" (current value:
"0", data source: default value)
Whether to display the process map after it is
computed
MCA rmaps: parameter "rmaps_base_display_devel_map" (current
value: "0", data source: default value)
Whether to display a developer-detail process map
after it is computed
MCA rmaps: parameter "rmaps" (current value: <none>, data
source: default value)
Default selection set of components for the rmaps
framework (<none> means use all components that can be found)
MCA rmaps: parameter "rmaps_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the rmaps framework (0 = no
verbosity)
MCA rmaps: parameter "rmaps_rank_file_path" (current value:
<none>, data source: default value)
The path to the rank mapping file
MCA rmaps: parameter "rmaps_rank_file_priority" (current value:
"0", data source: default value)
MCA rmaps: parameter "rmaps_round_robin_priority" (current
value: "0", data source: default value)
MCA rmaps: parameter "rmaps_seq_priority" (current value: "0",
data source: default value)
MCA rml: parameter "rml_wrapper" (current value: <none>, data
source: default value)
Use a Wrapper component around the selected RML
component
MCA rml: parameter "rml" (current value: <none>, data source:
default value)
Default selection set of components for the rml
framework (<none> means use all components that can be found)
MCA rml: parameter "rml_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the rml framework (0 = no
verbosity)
MCA rml: parameter "rml_oob_priority" (current value: "0",
data source: default value)
MCA routed: parameter "routed" (current value: <none>, data
source: default value)
Default selection set of components for the routed
framework (<none> means use all components that can be found)
MCA routed: parameter "routed_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the routed framework (0 = no
verbosity)
MCA routed: parameter "routed_binomial_priority" (current value:
"0", data source: default value)
MCA routed: parameter "routed_direct_priority" (current value:
"0", data source: default value)
MCA routed: parameter "routed_linear_priority" (current value:
"0", data source: default value)
MCA plm: parameter "plm" (current value: <none>, data source:
default value)
Default selection set of components for the plm
framework (<none> means use all components that can be found)
MCA plm: parameter "plm_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the plm framework (0 = no
verbosity)
MCA plm: parameter "plm_rsh_num_concurrent" (current value:
"128", data source: default value)
How many plm_rsh_agent instances to invoke
concurrently (must be > 0)
MCA plm: parameter "plm_rsh_force_rsh" (current value: "0",
data source: default value)
Force the launcher to always use rsh
MCA plm: parameter "plm_rsh_disable_qrsh" (current value: "0",
data source: default value)
Disable the launcher to use qrsh when under the SGE
parallel environment
MCA plm: parameter "plm_rsh_daemonize_qrsh" (current value:
"0", data source: default value)
Daemonize the orted under the SGE parallel environment
MCA plm: parameter "plm_rsh_priority" (current value: "10",
data source: default value)
Priority of the rsh plm component
MCA plm: parameter "plm_rsh_delay" (current value: "1", data
source: default value)
Delay (in seconds) between invocations of the remote
agent, but only used when the "debug" MCA parameter is true, or the top-level
MCA debugging is enabled (otherwise this value is ignored)
MCA plm: parameter "plm_rsh_assume_same_shell" (current value:
"1", data source: default value)
If set to 1, assume that the shell on the remote node
is the same as the shell on the local node. Otherwise, probe for what the
remote shell.
MCA plm: parameter "plm_rsh_agent" (current value: "ssh :
rsh", data source: default value, synonyms: pls_rsh_agent)
The command used to launch executables on remote
nodes (typically either "ssh" or "rsh")
MCA plm: parameter "plm_rsh_tree_spawn" (current value: "0",
data source: default value)
If set to 1, launch via a tree-based topology
MCA plm: parameter "plm_slurm_args" (current value: <none>,
data source: default value)
Custom arguments to srun
MCA plm: parameter "plm_slurm_priority" (current value: "0",
data source: default value)
MCA filem: parameter "filem" (current value: <none>, data
source: default value)
Which Filem component to use (empty = auto-select)
MCA filem: parameter "filem_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the filem framework (0 = no
verbosity)
MCA filem: parameter "filem_rsh_priority" (current value: "20",
data source: default value)
Priority of the FILEM rsh component
MCA filem: parameter "filem_rsh_verbose" (current value: "0",
data source: default value)
Verbose level for the FILEM rsh component
MCA filem: parameter "filem_rsh_rcp" (current value: "scp", data
source: default value)
The rsh cp command for the FILEM rsh component
MCA filem: parameter "filem_rsh_rsh" (current value: "ssh", data
source: default value)
The remote shell command for the FILEM rsh component
MCA filem: parameter "filem_rsh_max_incomming" (current value:
"10", data source: default value)
Maximum number of incomming connections
MCA filem: parameter "filem_rsh_max_outgoing" (current value:
"10", data source: default value)
Maximum number of out going connections (Currently
not used)
MCA errmgr: parameter "errmgr" (current value: <none>, data
source: default value)
Default selection set of components for the errmgr
framework (<none> means use all components that can be found)
MCA errmgr: parameter "errmgr_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the errmgr framework (0 = no
verbosity)
MCA errmgr: parameter "errmgr_default_priority" (current value:
"0", data source: default value)
MCA ess: parameter "ess" (current value: <none>, data source:
default value)
Default selection set of components for the ess
framework (<none> means use all components that can be found)
MCA ess: parameter "ess_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the ess framework (0 = no
verbosity)
MCA ess: parameter "ess_env_priority" (current value: "0",
data source: default value)
MCA ess: parameter "ess_hnp_priority" (current value: "0",
data source: default value)
MCA ess: parameter "ess_singleton_priority" (current value:
"0", data source: default value)
MCA ess: parameter "ess_slurm_priority" (current value: "0",
data source: default value)
MCA ess: parameter "ess_tool_priority" (current value: "0",
data source: default value)
MCA grpcomm: parameter "grpcomm" (current value: <none>, data
source: default value)
Default selection set of components for the grpcomm
framework (<none> means use all components that can be found)
MCA grpcomm: parameter "grpcomm_base_verbose" (current value: "0",
data source: default value)
Verbosity level for the grpcomm framework (0 = no
verbosity)
MCA grpcomm: parameter "grpcomm_bad_priority" (current value: "0",
data source: default value)
MCA grpcomm: parameter "grpcomm_basic_priority" (current value:
"0", data source: default value)
program diffuse
implicit none
include "mpif.h"
integer nsteps
parameter (nsteps = 150000)
integer step
real a,b
integer ierr
integer mpistatus(MPI_STATUS_SIZE)
integer nprocs,rank
integer leftneighbour, rightneighbour
integer tag
call MPI_INIT(ierr)
call MPI_COMM_RANK(MPI_COMM_WORLD,rank,ierr)
call MPI_COMM_SIZE(MPI_COMM_WORLD,nprocs,ierr)
leftneighbour = rank-1
if (leftneighbour .eq. -1) then
leftneighbour = nprocs-1
endif
rightneighbour = rank+1
if (rightneighbour .eq. nprocs) then
rightneighbour = 0
endif
tag = 1
do step=1, nsteps
call MPI_SENDRECV(a,1,MPI_REAL,rightneighbour, &
& tag, &
& b, 1, MPI_REAL, leftneighbour, &
& tag, &
& MPI_COMM_WORLD, mpistatus, ierr)
if ((rank .eq. 0) .and. (mod(step,10) .eq. 1)) then
print *, 'Step = ', step
endif
enddo
call MPI_FINALIZE(ierr)
end
