Hello:
Have you actually tried this and got it to work? It did not work
for me.
burl-ct-v440-0 50 =>mpirun -host burl-ct-v440-0,burl-ct-v440-1 -np 1
-mca btl self,sm,tcp -mca btl_tcp_if_include ce0 connectivity_c : -
np 1
-mca btl self,sm,tcp -mca btl_tcp_if_include ce0 connectivity_c
Connectivity test on 2 processes PASSED.
burl-ct-v440-0 51 =>mpirun -host burl-ct-v440-0,burl-ct-v440-1 -np 1
-mca btl self,sm,tcp -mca btl_tcp_if_include ibd0 connectivity_c : -
np 1
-mca btl self,sm,tcp -mca btl_tcp_if_include ibd0 connectivity_c
Connectivity test on 2 processes PASSED.
burl-ct-v440-0 52 =>mpirun -host burl-ct-v440-0,burl-ct-v440-1 -np 1
-mca btl self,sm,tcp -mca btl_tcp_if_include ce0 connectivity_c : -
np 1
-mca btl self,sm,tcp -mca btl_tcp_if_include ibd0 connectivity_c
--------------------------------------------------------------------------
Process 0.1.1 is unable to reach 0.1.0 for MPI communication.
If you specified the use of a BTL component, you may have
forgotten a component (such as "self") in the list of
usable components.
--------------------------------------------------------------------------
--------------------------------------------------------------------------
It looks like MPI_INIT failed for some reason; your parallel process
is
likely to abort. There are many reasons that a parallel process can
fail during MPI_INIT; some of which are due to configuration or
environment
problems. This failure appears to be an internal failure; here's some
additional information (which may only be relevant to an Open MPI
developer):
PML add procs failed
--> Returned "Unreachable" (-12) instead of "Success" (0)
--------------------------------------------------------------------------
--------------------------------------------------------------------------
Process 0.1.0 is unable to reach 0.1.1 for MPI communication.
If you specified the use of a BTL component, you may have
forgotten a component (such as "self") in the list of
usable components.
--------------------------------------------------------------------------
--------------------------------------------------------------------------
It looks like MPI_INIT failed for some reason; your parallel process
is
likely to abort. There are many reasons that a parallel process can
fail during MPI_INIT; some of which are due to configuration or
environment
problems. This failure appears to be an internal failure; here's some
additional information (which may only be relevant to an Open MPI
developer):
PML add procs failed
--> Returned "Unreachable" (-12) instead of "Success" (0)
--------------------------------------------------------------------------
*** An error occurred in MPI_Init
*** before MPI was initialized
*** MPI_ERRORS_ARE_FATAL (goodbye)
*** An error occurred in MPI_Init
*** before MPI was initialized
*** MPI_ERRORS_ARE_FATAL (goodbye)
burl-ct-v440-0 53 =>
Aurélien Bouteiller wrote:
Try something similar to this
mpirun -np 1 -mca btl self,tcp -mca btl_tcp_if_include en1
NetPIPE_3.6/
NPmpi : -np 1 -mca btl self,tcp -mca btl_tcp_if_include en0
NetPIPE_3.6/NPmpi
You should then be able to specify a different if_include mask for
you
different processes.
Aurelien
Le 11 janv. 08 à 06:46, Lydia Heck a écrit :
I should have added that the two networks are not routable,
and that they are private class B.
On Fri, 11 Jan 2008, Lydia Heck wrote:
I have a setup which contains one set of machines
with one nge and one e1000g network and of machines
with two e1000g networks configured. I am planning a
large run where all these computers will be occupied
with one job and the mpi communication should only go
over one specific network which is configured over
e1000g0 on the first set of machines and on e1000g1 on the
second set. I cannot use - for obvious reasons to either
include all of e1000g or to exclude part of e1000g - if that is
possible.
So I have to exclude or include on the internet number range.
Is there an obvious flag - which I have not yet found - to tell
mpirun to use one specific network?
Lydia
------------------------------------------
Dr E L Heck
University of Durham
Institute for Computational Cosmology
Ogden Centre
Department of Physics
South Road
DURHAM, DH1 3LE
United Kingdom
e-mail: lydia.h...@durham.ac.uk
Tel.: + 44 191 - 334 3628
Fax.: + 44 191 - 334 3645
___________________________________________
------------------------------------------
Dr E L Heck
University of Durham
Institute for Computational Cosmology
Ogden Centre
Department of Physics
South Road
DURHAM, DH1 3LE
United Kingdom
e-mail: lydia.h...@durham.ac.uk
Tel.: + 44 191 - 334 3628
Fax.: + 44 191 - 334 3645
___________________________________________
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
Dr. Aurélien Bouteiller
Sr. Research Associate - Innovative Computing Laboratory
Suite 350, 1122 Volunteer Boulevard
Knoxville, TN 37996
865 974 6321
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
--
=========================
rolf.vandeva...@sun.com
781-442-3043
=========================
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
