Note that you still definitely need "self" in the BTL list. "self"
is the loopback device/btl (i.e., one MPI process sending to itself;
not sending to another process on the same host).
On Nov 1, 2007, at 3:52 PM, Jon Mason wrote:
On Wed, Oct 31, 2007 at 06:45:10PM -0400, Tim Prins wrote:
Hi Jon,
Just to make sure, running 'ompi_info' shows that you have the
udapl btl
installed?
Yes, I get the following:
# ompi_info | grep dapl
MCA btl: udapl (MCA v1.0, API v1.0, Component v1.2.5)
If I do not include "self" in the mca, then I get an error saying it
cannot find the btl component:
# mpirun --n 2 --host vic12-10g,vic20-10g -mca btl udapl /usr/mpi/
gcc/openmpi-1.2.2-1/tests/IMB-2.3/IMB-MPI1 pingpong
----------------------------------------------------------------------
----
No available btl components were found!
This means that there are no components of this type installed on your
system or all the components reported that they could not be used.
This is a fatal error; your MPI process is likely to abort. Check the
output of the "ompi_info" command and ensure that components of this
type are available on your system. You may also wish to check the
value of the "component_path" MCA parameter and ensure that it has at
least one directory that contains valid MCA components.
----------------------------------------------------------------------
----
mpirun noticed that job rank 1 with PID 4335 on node vic20-10g
exited on
signal 15 (Terminated).
# ompi_info --all | grep component_path
MCA mca: parameter "mca_component_path" (current
value: "/usr/mpi/gcc/openmpi-1.2-svn/lib/openmpi:/root/.openmpi/
components")
# ls /usr/mpi/gcc/openmpi-1.2-svn/lib/openmpi | grep dapl
mca_btl_udapl.la
mca_btl_udapl.so
So it looks to me like it should be finding it, but perhaps I am
lacking
something in my configuration. Any ideas?
Thanks,
Jon
Tim
On Wednesday 31 October 2007 06:11:39 pm Jon Mason wrote:
I am having a bit of a problem getting udapl to work via mpirun
(over
open-mpi, obviously). I am running a basic pingpong test and I
get the
following error.
# mpirun --n 2 --host vic12-10g,vic20-10g -mca btl udapl,self
/usr/mpi/gcc/open*/tests/IMB*/IMB-MPI1 pingpong
--------------------------------------------------------------------
------
Process 0.1.1 is unable to reach 0.1.0 for MPI communication.
If you specified the use of a BTL component, you may have
forgotten a component (such as "self") in the list of
usable components.
--------------------------------------------------------------------
------
--------------------------------------------------------------------
------
It looks like MPI_INIT failed for some reason; your parallel
process is
likely to abort. There are many reasons that a parallel process can
fail during MPI_INIT; some of which are due to configuration or
environment
problems. This failure appears to be an internal failure; here's
some
additional information (which may only be relevant to an Open MPI
developer):
PML add procs failed
--> Returned "Unreachable" (-12) instead of "Success" (0)
--------------------------------------------------------------------
------
*** An error occurred in MPI_Init
*** before MPI was initialized
*** MPI_ERRORS_ARE_FATAL (goodbye)
--------------------------------------------------------------------
------
Process 0.1.0 is unable to reach 0.1.1 for MPI communication.
If you specified the use of a BTL component, you may have
forgotten a component (such as "self") in the list of
usable components.
--------------------------------------------------------------------
------
--------------------------------------------------------------------
------
It looks like MPI_INIT failed for some reason; your parallel
process is
likely to abort. There are many reasons that a parallel process can
fail during MPI_INIT; some of which are due to configuration or
environment
problems. This failure appears to be an internal failure; here's
some
additional information (which may only be relevant to an Open MPI
developer):
PML add procs failed
--> Returned "Unreachable" (-12) instead of "Success" (0)
--------------------------------------------------------------------
------
*** An error occurred in MPI_Init
*** before MPI was initialized
*** MPI_ERRORS_ARE_FATAL (goodbye)
The command is successful if udapl is replaced with tcp or
openib. So I
think my setup is correct. Also, dapltest successfully completes
without any problems over IB or iWARP.
Any thoughts or suggestions would be greatly appreciated.
Thanks,
Jon
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
--
Jeff Squyres
Cisco Systems
