I am presently trying to get OpenMPI up and running on a small cluster
of MacPros (dual dual-core Xeons) using TCP. Opne MPI was compiled using
the intel Fortran Compiler (9.1) and gcc. When I try to launch a job on
a remote node, orted starts on the remote node but then times out. I am
guessing that the problem is SSH related. Any thoughts?
Thanks,
Dave
Details:
I am using SSH, set up as outlined in the FAQ, using ssh-agent to allow
passwordless logins. The paths for all the libraries appear to be OK.
A simple MPI code (Hello_World_Fortran) launched on node01 will run OK
for up to four processors (all on node01). The output is shown here.
node01 1247% mpirun --debug-daemons -hostfile machinefile -np 4
Hello_World_Fortran
Calling MPI_INIT
Calling MPI_INIT
Calling MPI_INIT
Calling MPI_INIT
Fortran version of Hello World, rank 2
Rank 0 is present in Fortran version of Hello World.
Fortran version of Hello World, rank 3
Fortran version of Hello World, rank 1
For five processors mpirun tries to start an additional process on
node03. Everything launches the same on node01 (four instances of
Hello_World_Fortran are launched). On node03, orted starts, but times
out after 10 seconds and the output below is generated.
node01 1246% mpirun --debug-daemons -hostfile machinefile -np 5
Hello_World_Fortran
Calling MPI_INIT
Calling MPI_INIT
Calling MPI_INIT
Calling MPI_INIT
[node03:02422] [0,0,1]-[0,0,0] mca_oob_tcp_peer_send_blocking: send()
failed with errno=57
[node01.local:21427] ERROR: A daemon on node node03 failed to start as
expected.
[node01.local:21427] ERROR: There may be more information available from
[node01.local:21427] ERROR: the remote shell (see above).
[node01.local:21427] ERROR: The daemon exited unexpectedly with status
255.
forrtl: error (78): process killed (SIGTERM)
forrtl: error (78): process killed (SIGTERM)
Here is the ompi info:
node01 1248% ompi_info --all
Open MPI: 1.1.2
Open MPI SVN revision: r12073
Open RTE: 1.1.2
Open RTE SVN revision: r12073
OPAL: 1.1.2
OPAL SVN revision: r12073
MCA memory: darwin (MCA v1.0, API v1.0, Component v1.1.2)
MCA maffinity: first_use (MCA v1.0, API v1.0, Component
v1.1.2)
MCA timer: darwin (MCA v1.0, API v1.0, Component v1.1.2)
MCA allocator: basic (MCA v1.0, API v1.0, Component v1.0)
MCA allocator: bucket (MCA v1.0, API v1.0, Component v1.0)
MCA coll: basic (MCA v1.0, API v1.0, Component v1.1.2)
MCA coll: hierarch (MCA v1.0, API v1.0, Component
v1.1.2)
MCA coll: self (MCA v1.0, API v1.0, Component v1.1.2)
MCA coll: sm (MCA v1.0, API v1.0, Component v1.1.2)
MCA coll: tuned (MCA v1.0, API v1.0, Component v1.1.2)
MCA io: romio (MCA v1.0, API v1.0, Component v1.1.2)
MCA mpool: sm (MCA v1.0, API v1.0, Component v1.1.2)
MCA pml: ob1 (MCA v1.0, API v1.0, Component v1.1.2)
MCA bml: r2 (MCA v1.0, API v1.0, Component v1.1.2)
MCA rcache: rb (MCA v1.0, API v1.0, Component v1.1.2)
MCA btl: self (MCA v1.0, API v1.0, Component v1.1.2)
MCA btl: sm (MCA v1.0, API v1.0, Component v1.1.2)
MCA btl: tcp (MCA v1.0, API v1.0, Component v1.0)
MCA topo: unity (MCA v1.0, API v1.0, Component v1.1.2)
MCA osc: pt2pt (MCA v1.0, API v1.0, Component v1.0)
MCA gpr: null (MCA v1.0, API v1.0, Component v1.1.2)
MCA gpr: proxy (MCA v1.0, API v1.0, Component v1.1.2)
MCA gpr: replica (MCA v1.0, API v1.0, Component v1.1.2)
MCA iof: proxy (MCA v1.0, API v1.0, Component v1.1.2)
MCA iof: svc (MCA v1.0, API v1.0, Component v1.1.2)
MCA ns: proxy (MCA v1.0, API v1.0, Component v1.1.2)
MCA ns: replica (MCA v1.0, API v1.0, Component v1.1.2)
MCA oob: tcp (MCA v1.0, API v1.0, Component v1.0)
MCA ras: dash_host (MCA v1.0, API v1.0, Component
v1.1.2)
MCA ras: hostfile (MCA v1.0, API v1.0, Component
v1.1.2)
MCA ras: localhost (MCA v1.0, API v1.0, Component
v1.1.2)
MCA ras: xgrid (MCA v1.0, API v1.0, Component v1.1.2)
MCA rds: hostfile (MCA v1.0, API v1.0, Component
v1.1.2)
MCA rds: resfile (MCA v1.0, API v1.0, Component v1.1.2)
MCA rmaps: round_robin (MCA v1.0, API v1.0, Component
v1.1.2)
MCA rmgr: proxy (MCA v1.0, API v1.0, Component v1.1.2)
MCA rmgr: urm (MCA v1.0, API v1.0, Component v1.1.2)
MCA rml: oob (MCA v1.0, API v1.0, Component v1.1.2)
MCA pls: fork (MCA v1.0, API v1.0, Component v1.1.2)
MCA pls: rsh (MCA v1.0, API v1.0, Component v1.1.2)
MCA pls: xgrid (MCA v1.0, API v1.0, Component v1.1.2)
MCA sds: env (MCA v1.0, API v1.0, Component v1.1.2)
MCA sds: pipe (MCA v1.0, API v1.0, Component v1.1.2)
MCA sds: seed (MCA v1.0, API v1.0, Component v1.1.2)
MCA sds: singleton (MCA v1.0, API v1.0, Component
v1.1.2)
Prefix: /usr/local
Bindir: /usr/local/bin
Libdir: /usr/local/lib
Incdir: /usr/local/include
Pkglibdir: /usr/local/lib/openmpi
Sysconfdir: /usr/local/etc
Configured architecture: i386-apple-darwin8.7.3
Configured by: root
Configured on: Wed Jan 24 10:46:02 EST 2007
Configure host: node01
Built by: root
Built on: Wed Jan 24 11:02:16 EST 2007
Built host: node01
C bindings: yes
C++ bindings: yes
Fortran77 bindings: yes (single underscore)
Fortran90 bindings: yes
Fortran90 bindings size: small
C compiler: gcc
C compiler absolute: /usr/bin/gcc
C char size: 1
C bool size: 1
C short size: 2
C int size: 4
C long size: 4
C float size: 4
C double size: 8
C pointer size: 4
C char align: 1
C bool align: 1
C int align: 4
C float align: 4
C double align: 4
C++ compiler: g++
C++ compiler absolute: /usr/bin/g++
Fortran77 compiler: ifort
Fortran77 compiler abs: /usr/bin/ifort
Fortran90 compiler: ifort
Fortran90 compiler abs: /usr/bin/ifort
Fort integer size: 4
Fort logical size: 4
Fort logical value true: -1
Fort have integer1: yes
Fort have integer2: yes
Fort have integer4: yes
Fort have integer8: yes
Fort have integer16: no
Fort have real4: yes
Fort have real8: yes
Fort have real16: yes
Fort have complex8: yes
Fort have complex16: yes
Fort have complex32: yes
Fort integer1 size: 1
Fort integer2 size: 2
Fort integer4 size: 4
Fort integer8 size: 8
Fort integer16 size: -1
Fort real size: 4
Fort real4 size: 4
Fort real8 size: 8
Fort real16 size: 16
Fort dbl prec size: 4
Fort cplx size: 4
Fort dbl cplx size: 4
Fort cplx8 size: 8
Fort cplx16 size: 16
Fort cplx32 size: 32
Fort integer align: 1
Fort integer1 align: 1
Fort integer2 align: 1
Fort integer4 align: 1
Fort integer8 align: 1
Fort integer16 align: -1
Fort real align: 1
Fort real4 align: 1
Fort real8 align: 1
Fort real16 align: 1
Fort dbl prec align: 1
Fort cplx align: 1
Fort dbl cplx align: 1
Fort cplx8 align: 1
Fort cplx16 align: 1
Fort cplx32 align: 1
C profiling: yes
C++ profiling: yes
Fortran77 profiling: yes
Fortran90 profiling: yes
C++ exceptions: no
Thread support: posix (mpi: no, progress: no)
Build CFLAGS: -O3 -DNDEBUG -fno-strict-aliasing
Build CXXFLAGS: -O3 -DNDEBUG -finline-functions
Build FFLAGS:
Build FCFLAGS:
Build LDFLAGS: -export-dynamic -Wl,-u,_munmap
-Wl,-multiply_defined,suppress
Build LIBS:
Wrapper extra CFLAGS:
Wrapper extra CXXFLAGS:
Wrapper extra FFLAGS:
Wrapper extra FCFLAGS:
Wrapper extra LDFLAGS: -Wl,-u,_munmap
-Wl,-multiply_defined,suppress
Wrapper extra LIBS: -ldl
Internal debug support: no
MPI parameter check: runtime
Memory profiling support: no
Memory debugging support: no
libltdl support: yes
MCA mca: parameter "mca_param_files" (current value:
"/Users/dwalker/.openmpi/mca-params.conf:/usr/local/etc/openmpi-mca-para
ms.conf")
Path for MCA configuration files containing
default parameter values
MCA mca: parameter "mca_component_path" (current value:
"/usr/local/lib/openmpi:/Users/dwalker/.openmpi/components")
Path where to look for Open MPI and ORTE
components
MCA mca: parameter "mca_verbose" (current value:
<none>)
Top-level verbosity parameter
MCA mca: parameter "mca_component_show_load_errors"
(current value: "1")
Whether to show errors for components that
failed to load or not
MCA mca: parameter "mca_component_disable_dlopen"
(current value: "0")
Whether to attempt to disable opening dynamic
components or not
MCA mpi: parameter "mpi_param_check" (current value:
"1")
Whether you want MPI API parameters checked at
run-time or not. Possible values are 0 (no checking) and 1
(perform checking at run-time)
MCA mpi: parameter "mpi_yield_when_idle" (current
value: "0")
Yield the processor when waiting for MPI
communication (for MPI processes, will default to 1 when oversubscribing
nodes)
MCA mpi: parameter "mpi_event_tick_rate" (current
value: "-1")
How often to progress TCP communications (0 =
never, otherwise specified in microseconds)
MCA mpi: parameter "mpi_show_handle_leaks" (current
value: "0")
Whether MPI_FINALIZE shows all MPI handles
that were not freed or not
MCA mpi: parameter "mpi_no_free_handles" (current
value: "0")
Whether to actually free MPI objects when
their handles are freed
MCA mpi: parameter "mpi_show_mca_params" (current
value: "0")
Whether to show all MCA parameter value during
MPI_INIT or not (good for reproducability of MPI jobs)
MCA mpi: parameter "mpi_show_mca_params_file" (current
value: <none>)
If mpi_show_mca_params is true, setting this
string to a valid filename tells Open MPI to dump all the MCA
parameter values into a file suitable for
reading via the mca_param_files parameter (good for reproducability of
MPI jobs)
MCA mpi: parameter "mpi_paffinity_alone" (current
value: "0")
If nonzero, assume that this job is the only
(set of) process(es) running on each node and bind processes to
processors, starting with processor ID 0
MCA mpi: parameter "mpi_keep_peer_hostnames" (current
value: "1")
If nonzero, save the string hostnames of all
MPI peer processes (mostly for error / debugging output messages).
This can add quite a bit of memory usage to
each MPI process.
MCA mpi: parameter "mpi_abort_delay" (current value:
"0")
If nonzero, print out an identifying message
when MPI_ABORT is invoked (hostname, PID of the process that called
MPI_ABORT) and delay for that many seconds
before exiting (a negative delay value means to never abort). This
allows attaching of a debugger before quitting
the job.
MCA mpi: information "mpi_abort_print_stack" (value:
"0")
If nonzero, print out a stack trace when
MPI_ABORT is invoked
MCA mpi: parameter "mpi_leave_pinned" (current value:
"0")
leave_pinned
MCA mpi: parameter "mpi_leave_pinned_pipeline" (current
value: "0")
leave_pinned_pipeline
MCA orte: parameter "orte_base_user_debugger" (current
value: "totalview @mpirun@ -a @mpirun_args@ : fxp @mpirun@ -a
@mpirun_args@")
Sequence of user-level debuggers to search for
in orterun
MCA orte: parameter "orte_debug" (current value: "0")
Whether or not to enable debugging output for
all ORTE components (0 or 1)
MCA opal: parameter "opal_signal" (current value:
"6,10,8,11")
If a signal is received, display the stack
trace frame
MCA memory: parameter "memory" (current value: <none>)
Default selection set of components for the
memory framework (<none> means "use all components that can be
found")
MCA memory: parameter "memory_base_verbose" (current
value: "0")
Verbosity level for the memory framework (0 =
no verbosity)
MCA memory: parameter "memory_darwin_priority" (current
value: "0")
MCA paffinity: parameter "paffinity" (current value: <none>)
Default selection set of components for the
paffinity framework (<none> means "use all components that can be
found")
MCA maffinity: parameter "maffinity" (current value: <none>)
Default selection set of components for the
maffinity framework (<none> means "use all components that can be
found")
MCA maffinity: parameter "maffinity_first_use_priority"
(current value: "10")
Priority of the first_use maffinity component
MCA timer: parameter "timer" (current value: <none>)
Default selection set of components for the
timer framework (<none> means "use all components that can be found")
MCA timer: parameter "timer_base_verbose" (current value:
"0")
Verbosity level for the timer framework (0 =
no verbosity)
MCA timer: parameter "timer_darwin_priority" (current
value: "0")
MCA allocator: parameter "allocator" (current value: <none>)
Default selection set of components for the
allocator framework (<none> means "use all components that can be
found")
MCA allocator: parameter "allocator_base_verbose" (current
value: "0")
Verbosity level for the allocator framework (0
= no verbosity)
MCA allocator: parameter "allocator_basic_priority" (current
value: "0")
MCA allocator: parameter "allocator_bucket_num_buckets"
(current value: "30")
MCA allocator: parameter "allocator_bucket_priority" (current
value: "0")
MCA coll: parameter "coll" (current value: <none>)
Default selection set of components for the
coll framework (<none> means "use all components that can be found")
MCA coll: parameter "coll_base_verbose" (current value:
"0")
Verbosity level for the coll framework (0 = no
verbosity)
MCA coll: parameter "coll_basic_priority" (current
value: "10")
Priority of the basic coll component
MCA coll: parameter "coll_basic_crossover" (current
value: "4")
Minimum number of processes in a communicator
before using the logarithmic algorithms
MCA coll: parameter "coll_hierarch_priority" (current
value: "0")
Priority of the hierarchical coll component
MCA coll: parameter "coll_hierarch_verbose" (current
value: "0")
Turn verbose message of the hierarchical coll
component on/off
MCA coll: parameter "coll_hierarch_use_rdma" (current
value: "0")
Switch from the send btl list used to detect
hierarchies to the rdma btl list
MCA coll: parameter "coll_hierarch_ignore_sm" (current
value: "0")
Ignore sm protocol when detecting hierarchies.
Required to enable the usage of protocol specific collective
operations
MCA coll: parameter "coll_hierarch_symmetric" (current
value: "0")
Assume symmetric configuration
MCA coll: parameter "coll_self_priority" (current value:
"75")
MCA coll: parameter "coll_sm_priority" (current value:
"0")
Priority of the sm coll component
MCA coll: parameter "coll_sm_control_size" (current
value: "4096")
Length of the control data -- should usually
be either the length of a cache line on most SMPs, or the size of a
page on machines that support direct memory
affinity page placement (in bytes)
MCA coll: parameter "coll_sm_bootstrap_filename"
(current value: "shared_mem_sm_bootstrap")
Filename (in the Open MPI session directory)
of the coll sm component bootstrap rendezvous mmap file
MCA coll: parameter "coll_sm_bootstrap_num_segments"
(current value: "8")
Number of segments in the bootstrap file
MCA coll: parameter "coll_sm_fragment_size" (current
value: "8192")
Fragment size (in bytes) used for passing data
through shared memory (will be rounded up to the nearest
control_size size)
MCA coll: parameter "coll_sm_mpool" (current value:
"sm")
Name of the mpool component to use
MCA coll: parameter "coll_sm_comm_in_use_flags" (current
value: "2")
Number of "in use" flags, used to mark a
message passing area segment as currently being used or not (must be >=
2
and <= comm_num_segments)
MCA coll: parameter "coll_sm_comm_num_segments" (current
value: "8")
Number of segments in each communicator's
shared memory message passing area (must be >= 2, and must be a multiple
of comm_in_use_flags)
MCA coll: parameter "coll_sm_tree_degree" (current
value: "4")
Degree of the tree for tree-based operations
(must be => 1 and <= min(control_size, 255))
MCA coll: information
"coll_sm_shared_mem_used_bootstrap" (value: "160")
Amount of shared memory used in the shared
memory bootstrap area (in bytes)
MCA coll: parameter "coll_sm_info_num_procs" (current
value: "4")
Number of processes to use for the calculation
of the shared_mem_size MCA information parameter (must be => 2)
MCA coll: information "coll_sm_shared_mem_used_data"
(value: "548864")
Amount of shared memory used in the shared
memory data area for info_num_procs processes (in bytes)
MCA coll: parameter "coll_tuned_priority" (current
value: "30")
Priority of the tuned coll component
MCA coll: parameter
"coll_tuned_pre_allocate_memory_comm_size_limit" (current value:
"32768")
Size of communicator were we stop
pre-allocating memory for the fixed internal buffer used for message
requests
etc that is hung off the communicator data
segment. I.e. if you have a 100'000 nodes you might not want to
pre-allocate 200'000 request handle slots per
communicator instance!
MCA coll: parameter "coll_tuned_use_dynamic_rules"
(current value: "0")
Switch used to decide if we use static (if
statements) or dynamic (built at runtime) decision function rules
MCA coll: parameter "coll_tuned_init_tree_fanout"
(current value: "4")
Inital fanout used in the tree topologies for
each communicator. This is only an initial guess, if a tuned
collective needs a different fanout for an
operation, it build it dynamically. This parameter is only for the
first guess and might save a little time
MCA coll: parameter "coll_tuned_init_chain_fanout"
(current value: "4")
Inital fanout used in the chain (fanout
followed by pipeline) topologies for each communicator. This is only an
initial guess, if a tuned collective needs a
different fanout for an operation, it build it dynamically. This
parameter is only for the first guess and
might save a little time
MCA coll: parameter "coll_tuned_allreduce_algorithm"
(current value: "0")
Which allreduce algorithm is used. Can be
locked down to choice of: 0 ignore, 1 basic linear, 2 nonoverlapping
(tuned reduce + tuned bcast)
MCA coll: parameter
"coll_tuned_allreduce_algorithm_segmentsize" (current value: "0")
Segment size in bytes used by default for
allreduce algorithms. Only has meaning if algorithm is forced and
supports segmenting. 0 bytes means no
segmentation.
MCA coll: parameter
"coll_tuned_allreduce_algorithm_tree_fanout" (current value: "4")
Fanout for n-tree used for allreduce
algorithms. Only has meaning if algorithm is forced and supports n-tree
topo
based operation.
MCA coll: parameter
"coll_tuned_allreduce_algorithm_chain_fanout" (current value: "4")
Fanout for chains used for allreduce
algorithms. Only has meaning if algorithm is forced and supports chain
topo
based operation.
MCA coll: parameter "coll_tuned_alltoall_algorithm"
(current value: "0")
Which alltoall algorithm is used. Can be
locked down to choice of: 0 ignore, 1 basic linear, 2 pairwise, 3:
modified bruck, 4: two proc only.
MCA coll: parameter
"coll_tuned_alltoall_algorithm_segmentsize" (current value: "0")
Segment size in bytes used by default for
alltoall algorithms. Only has meaning if algorithm is forced and
supports segmenting. 0 bytes means no
segmentation.
MCA coll: parameter
"coll_tuned_alltoall_algorithm_tree_fanout" (current value: "4")
Fanout for n-tree used for alltoall
algorithms. Only has meaning if algorithm is forced and supports n-tree
topo
based operation.
MCA coll: parameter
"coll_tuned_alltoall_algorithm_chain_fanout" (current value: "4")
Fanout for chains used for alltoall
algorithms. Only has meaning if algorithm is forced and supports chain
topo
based operation.
MCA coll: parameter "coll_tuned_barrier_algorithm"
(current value: "0")
Which barrier algorithm is used. Can be locked
down to choice of: 0 ignore, 1 linear, 2 double ring, 3: recursive
doubling 4: bruck, 5: two proc only, 6: step
based bmtree
MCA coll: parameter "coll_tuned_bcast_algorithm"
(current value: "0")
Which bcast algorithm is used. Can be locked
down to choice of: 0 ignore, 1 basic linear, 2 chain, 3: pipeline, 4:
split binary tree, 5: binary tree.
MCA coll: parameter
"coll_tuned_bcast_algorithm_segmentsize" (current value: "0")
Segment size in bytes used by default for
bcast algorithms. Only has meaning if algorithm is forced and supports
segmenting. 0 bytes means no segmentation.
MCA coll: parameter
"coll_tuned_bcast_algorithm_tree_fanout" (current value: "4")
Fanout for n-tree used for bcast algorithms.
Only has meaning if algorithm is forced and supports n-tree topo
based operation.
MCA coll: parameter
"coll_tuned_bcast_algorithm_chain_fanout" (current value: "4")
Fanout for chains used for bcast algorithms.
Only has meaning if algorithm is forced and supports chain topo based
operation.
MCA coll: parameter "coll_tuned_reduce_algorithm"
(current value: "0")
Which reduce algorithm is used. Can be locked
down to choice of: 0 ignore, 1 linear, 2 chain, 3 pipeline
MCA coll: parameter
"coll_tuned_reduce_algorithm_segmentsize" (current value: "0")
Segment size in bytes used by default for
reduce algorithms. Only has meaning if algorithm is forced and supports
segmenting. 0 bytes means no segmentation.
MCA coll: parameter
"coll_tuned_reduce_algorithm_tree_fanout" (current value: "4")
Fanout for n-tree used for reduce algorithms.
Only has meaning if algorithm is forced and supports n-tree topo
based operation.
MCA coll: parameter
"coll_tuned_reduce_algorithm_chain_fanout" (current value: "4")
Fanout for chains used for reduce algorithms.
Only has meaning if algorithm is forced and supports chain topo
based operation.
MCA io: parameter "io_base_freelist_initial_size"
(current value: "16")
Initial MPI-2 IO request freelist size
MCA io: parameter "io_base_freelist_max_size" (current
value: "64")
Max size of the MPI-2 IO request freelist
MCA io: parameter "io_base_freelist_increment"
(current value: "16")
Increment size of the MPI-2 IO request
freelist
MCA io: parameter "io" (current value: <none>)
Default selection set of components for the io
framework (<none> means "use all components that can be found")
MCA io: parameter "io_base_verbose" (current value:
"0")
Verbosity level for the io framework (0 = no
verbosity)
MCA io: parameter "io_romio_priority" (current value:
"10")
Priority of the io romio component
MCA io: parameter "io_romio_delete_priority" (current
value: "10")
Delete priority of the io romio component
MCA io: parameter
"io_romio_enable_parallel_optimizations" (current value: "0")
Enable set of Open MPI-added options to
improve collective file i/o performance
MCA mpool: parameter "mpool" (current value: <none>)
Default selection set of components for the
mpool framework (<none> means "use all components that can be found")
MCA mpool: parameter "mpool_base_verbose" (current value:
"0")
Verbosity level for the mpool framework (0 =
no verbosity)
MCA mpool: parameter "mpool_sm_size" (current value:
"536870912")
MCA mpool: parameter "mpool_sm_allocator" (current value:
"bucket")
MCA mpool: parameter "mpool_sm_priority" (current value:
"0")
MCA mpool: parameter "mpool_base_use_mem_hooks" (current
value: "0")
use memory hooks for deregistering freed
memory
MCA mpool: parameter "mpool_use_mem_hooks" (current
value: "0")
(deprecated, use mpool_base_use_mem_hooks)
MCA pml: parameter "pml" (current value: "ob1")
Default selection set of components for the
pml framework (<none> means "use all components that can be found")
MCA pml: parameter "pml_base_verbose" (current value:
"0")
Verbosity level for the pml framework (0 = no
verbosity)
MCA pml: parameter "pml_ob1_free_list_num" (current
value: "4")
MCA pml: parameter "pml_ob1_free_list_max" (current
value: "-1")
MCA pml: parameter "pml_ob1_free_list_inc" (current
value: "64")
MCA pml: parameter "pml_ob1_priority" (current value:
"1")
MCA pml: parameter "pml_ob1_eager_limit" (current
value: "131072")
MCA pml: parameter "pml_ob1_send_pipeline_depth"
(current value: "3")
MCA pml: parameter "pml_ob1_recv_pipeline_depth"
(current value: "4")
MCA bml: parameter "bml" (current value: <none>)
Default selection set of components for the
bml framework (<none> means "use all components that can be found")
MCA bml: parameter "bml_base_verbose" (current value:
"0")
Verbosity level for the bml framework (0 = no
verbosity)
MCA bml: parameter "bml_r2_priority" (current value:
"0")
MCA rcache: parameter "rcache" (current value: <none>)
Default selection set of components for the
rcache framework (<none> means "use all components that can be
found")
MCA rcache: parameter "rcache_base_verbose" (current
value: "0")
Verbosity level for the rcache framework (0 =
no verbosity)
MCA rcache: parameter "rcache_rb_priority" (current value:
"0")
MCA btl: parameter "btl_base_debug" (current value:
"0")
If btl_base_debug is 1 standard debug is
output, if > 1 verbose debug is output
MCA btl: parameter "btl" (current value: <none>)
Default selection set of components for the
btl framework (<none> means "use all components that can be found")
MCA btl: parameter "btl_base_verbose" (current value:
"0")
Verbosity level for the btl framework (0 = no
verbosity)
MCA btl: parameter "btl_self_free_list_num" (current
value: "0")
Number of fragments by default
MCA btl: parameter "btl_self_free_list_max" (current
value: "-1")
Maximum number of fragments
MCA btl: parameter "btl_self_free_list_inc" (current
value: "32")
Increment by this number of fragments
MCA btl: parameter "btl_self_eager_limit" (current
value: "131072")
Eager size fragmeng (before the rendez-vous
ptotocol)
MCA btl: parameter "btl_self_min_send_size" (current
value: "262144")
Minimum fragment size after the rendez-vous
MCA btl: parameter "btl_self_max_send_size" (current
value: "262144")
Maximum fragment size after the rendez-vous
MCA btl: parameter "btl_self_min_rdma_size" (current
value: "2147483647")
Maximum fragment size for the RDMA transfer
MCA btl: parameter "btl_self_max_rdma_size" (current
value: "2147483647")
Maximum fragment size for the RDMA transfer
MCA btl: parameter "btl_self_exclusivity" (current
value: "65536")
Device exclusivity
MCA btl: parameter "btl_self_flags" (current value:
"10")
Active behavior flags
MCA btl: parameter "btl_self_priority" (current value:
"0")
MCA btl: parameter "btl_sm_free_list_num" (current
value: "8")
MCA btl: parameter "btl_sm_free_list_max" (current
value: "-1")
MCA btl: parameter "btl_sm_free_list_inc" (current
value: "256")
MCA btl: parameter "btl_sm_max_procs" (current value:
"-1")
MCA btl: parameter "btl_sm_sm_extra_procs" (current
value: "2")
MCA btl: parameter "btl_sm_mpool" (current value: "sm")
MCA btl: parameter "btl_sm_eager_limit" (current value:
"1024")
MCA btl: parameter "btl_sm_max_frag_size" (current
value: "8192")
MCA btl: parameter "btl_sm_size_of_cb_queue" (current
value: "128")
MCA btl: parameter "btl_sm_cb_lazy_free_freq" (current
value: "120")
MCA btl: parameter "btl_sm_priority" (current value:
"0")
MCA btl: parameter "btl_tcp_if_include" (current value:
<none>)
MCA btl: parameter "btl_tcp_if_exclude" (current value:
"lo")
MCA btl: parameter "btl_tcp_free_list_num" (current
value: "8")
MCA btl: parameter "btl_tcp_free_list_max" (current
value: "-1")
MCA btl: parameter "btl_tcp_free_list_inc" (current
value: "32")
MCA btl: parameter "btl_tcp_sndbuf" (current value:
"131072")
MCA btl: parameter "btl_tcp_rcvbuf" (current value:
"131072")
MCA btl: parameter "btl_tcp_endpoint_cache" (current
value: "30720")
MCA btl: parameter "btl_tcp_exclusivity" (current
value: "0")
MCA btl: parameter "btl_tcp_eager_limit" (current
value: "65536")
MCA btl: parameter "btl_tcp_min_send_size" (current
value: "65536")
MCA btl: parameter "btl_tcp_max_send_size" (current
value: "131072")
MCA btl: parameter "btl_tcp_min_rdma_size" (current
value: "131072")
MCA btl: parameter "btl_tcp_max_rdma_size" (current
value: "2147483647")
MCA btl: parameter "btl_tcp_flags" (current value:
"10")
MCA btl: parameter "btl_tcp_priority" (current value:
"0")
MCA btl: parameter "btl_base_include" (current value:
<none>)
MCA btl: parameter "btl_base_exclude" (current value:
<none>)
MCA topo: parameter "topo" (current value: <none>)
Default selection set of components for the
topo framework (<none> means "use all components that can be found")
MCA topo: parameter "topo_base_verbose" (current value:
"0")
Verbosity level for the topo framework (0 = no
verbosity)
MCA osc: parameter "osc" (current value: <none>)
Default selection set of components for the
osc framework (<none> means "use all components that can be found")
MCA osc: parameter "osc_base_verbose" (current value:
"0")
Verbosity level for the osc framework (0 = no
verbosity)
MCA osc: parameter "osc_pt2pt_fence_sync_method"
(current value: "reduce_scatter")
How to synchronize fence: reduce_scatter,
allreduce, alltoall
MCA osc: parameter "osc_pt2pt_eager_send" (current
value: "0")
Attempt to start data movement during
communication call, instead of at synchrnoization time. Info key of
same
name overrides this value, if info key given.
MCA osc: parameter "osc_pt2pt_no_locks" (current value:
"0")
Enable optimizations available only if
MPI_LOCK is not used.
MCA osc: parameter "osc_pt2pt_priority" (current value:
"0")
MCA errmgr: parameter "errmgr" (current value: <none>)
Default selection set of components for the
errmgr framework (<none> means "use all components that can be
found")
MCA gpr: parameter "gpr_base_maxsize" (current value:
"2147483647")
MCA gpr: parameter "gpr_base_blocksize" (current value:
"512")
MCA gpr: parameter "gpr" (current value: <none>)
Default selection set of components for the
gpr framework (<none> means "use all components that can be found")
MCA gpr: parameter "gpr_null_priority" (current value:
"0")
MCA gpr: parameter "gpr_proxy_debug" (current value:
"0")
MCA gpr: parameter "gpr_proxy_priority" (current value:
"0")
MCA gpr: parameter "gpr_replica_debug" (current value:
"0")
MCA gpr: parameter "gpr_replica_isolate" (current
value: "0")
MCA gpr: parameter "gpr_replica_priority" (current
value: "0")
MCA iof: parameter "iof_base_window_size" (current
value: "4096")
MCA iof: parameter "iof_base_service" (current value:
"0.0.0")
MCA iof: parameter "iof" (current value: <none>)
Default selection set of components for the
iof framework (<none> means "use all components that can be found")
MCA iof: parameter "iof_proxy_debug" (current value:
"1")
MCA iof: parameter "iof_proxy_priority" (current value:
"0")
MCA iof: parameter "iof_svc_debug" (current value: "1")
MCA iof: parameter "iof_svc_priority" (current value:
"0")
MCA ns: parameter "ns" (current value: <none>)
Default selection set of components for the ns
framework (<none> means "use all components that can be found")
MCA ns: parameter "ns_proxy_debug" (current value:
"0")
MCA ns: parameter "ns_proxy_maxsize" (current value:
"2147483647")
MCA ns: parameter "ns_proxy_blocksize" (current value:
"512")
MCA ns: parameter "ns_proxy_priority" (current value:
"0")
MCA ns: parameter "ns_replica_debug" (current value:
"0")
MCA ns: parameter "ns_replica_isolate" (current value:
"0")
MCA ns: parameter "ns_replica_maxsize" (current value:
"2147483647")
MCA ns: parameter "ns_replica_blocksize" (current
value: "512")
MCA ns: parameter "ns_replica_priority" (current
value: "0")
MCA oob: parameter "oob" (current value: <none>)
Default selection set of components for the
oob framework (<none> means "use all components that can be found")
MCA oob: parameter "oob_base_verbose" (current value:
"0")
Verbosity level for the oob framework (0 = no
verbosity)
MCA oob: parameter "oob_tcp_peer_limit" (current value:
"-1")
MCA oob: parameter "oob_tcp_peer_retries" (current
value: "60")
MCA oob: parameter "oob_tcp_debug" (current value: "0")
MCA oob: parameter "oob_tcp_include" (current value:
<none>)
MCA oob: parameter "oob_tcp_exclude" (current value:
<none>)
MCA oob: parameter "oob_tcp_sndbuf" (current value:
"131072")
MCA oob: parameter "oob_tcp_rcvbuf" (current value:
"131072")
MCA oob: parameter "oob_tcp_connect_timeout" (current
value: "10")
connect() timeout in seconds, before trying
next interface
MCA oob: parameter "oob_tcp_priority" (current value:
"0")
MCA ras: parameter "ras" (current value: <none>)
Default selection set of components for the
ras framework (<none> means "use all components that can be found")
MCA ras: parameter "ras_dash_host_priority" (current
value: "5")
Selection priority for the dash_host RAS
component
MCA ras: parameter "ras_hostfile_priority" (current
value: "10")
Selection priority for the hostfile RAS
component
MCA ras: parameter "ras_localhost_priority" (current
value: "0")
Selection priority for the localhost RAS
component
MCA ras: parameter "ras_xgrid_priority" (current value:
"100")
MCA rds: parameter "rds" (current value: <none>)
Default selection set of components for the
rds framework (<none> means "use all components that can be found")
MCA rds: parameter "rds_hostfile_debug" (current value:
"0")
Toggle debug output for hostfile RDS component
MCA rds: parameter "rds_hostfile_path" (current value:
"/usr/local/etc/openmpi-default-hostfile")
ORTE Host filename
MCA rds: parameter "rds_hostfile_priority" (current
value: "0")
MCA rds: parameter "rds_resfile_debug" (current value:
"0")
Toggle debug output for resfile RDS component
MCA rds: parameter "rds_resfile_name" (current value:
<none>)
ORTE Resource filename
MCA rds: parameter "rds_resfile_priority" (current
value: "0")
MCA rmaps: parameter "rmaps_base_verbose" (current value:
"0")
Verbosity level for the rmaps framework
MCA rmaps: parameter "rmaps_base_schedule_policy"
(current value: "slot")
Scheduling Policy for RMAPS. [slot | node]
MCA rmaps: parameter "rmaps_base_schedule_local" (current
value: "1")
If nonzero, allow scheduling MPI applications
on the same node as mpirun (default). If zero, do not schedule any
MPI applications on the same node as mpirun
MCA rmaps: parameter "rmaps_base_no_oversubscribe"
(current value: "0")
If nonzero, then do not allow oversubscription
of nodes - mpirun will return an error if there aren't enough nodes
to launch all processes without
oversubscribing
MCA rmaps: parameter "rmaps" (current value: <none>)
Default selection set of components for the
rmaps framework (<none> means "use all components that can be found")
MCA rmaps: parameter "rmaps_round_robin_debug" (current
value: "1")
Toggle debug output for Round Robin RMAPS
component
MCA rmaps: parameter "rmaps_round_robin_priority"
(current value: "1")
Selection priority for Round Robin RMAPS
component
MCA rmgr: parameter "rmgr" (current value: <none>)
Default selection set of components for the
rmgr framework (<none> means "use all components that can be found")
MCA rmgr: parameter "rmgr_proxy_priority" (current
value: "0")
MCA rmgr: parameter "rmgr_urm_priority" (current value:
"0")
MCA rml: parameter "rml" (current value: <none>)
Default selection set of components for the
rml framework (<none> means "use all components that can be found")
MCA rml: parameter "rml_base_verbose" (current value:
"0")
Verbosity level for the rml framework (0 = no
verbosity)
MCA rml: parameter "rml_oob_priority" (current value:
"0")
MCA pls: parameter "pls" (current value: <none>)
Default selection set of components for the
pls framework (<none> means "use all components that can be found")
MCA pls: parameter "pls_fork_reap" (current value: "1")
Whether to wait to reap all children before
finalizing or not
MCA pls: parameter "pls_fork_reap_timeout" (current
value: "0")
When killing children processes, first send a
SIGTERM, then wait at least this timeout (in seconds), then send a
SIGKILL
MCA pls: parameter "pls_fork_priority" (current value:
"1")
Priority of this component
MCA pls: parameter "pls_fork_debug" (current value:
"0")
Whether to enable debugging output or not
MCA pls: parameter "pls_rsh_debug" (current value: "0")
Whether or not to enable debugging output for
the rsh pls component (0 or 1)
MCA pls: parameter "pls_rsh_num_concurrent" (current
value: "128")
How many pls_rsh_agent instances to invoke
concurrently (must be > 0)
MCA pls: parameter "pls_rsh_orted" (current value:
"orted")
The command name that the rsh pls component
will invoke for the ORTE daemon
MCA pls: parameter "pls_rsh_priority" (current value:
"10")
Priority of the rsh pls component
MCA pls: parameter "pls_rsh_delay" (current value: "1")
Delay (in seconds) between invocations of the
remote agent, but only used when the "debug" MCA parameter is true,
or the top-level MCA debugging is enabled
(otherwise this value is ignored)
MCA pls: parameter "pls_rsh_reap" (current value: "1")
If set to 1, wait for all the processes to
complete before exiting. Otherwise, quit immediately -- without
waiting for confirmation that all other
processes in the job have completed.
MCA pls: parameter "pls_rsh_assume_same_shell" (current
value: "1")
If set to 1, assume that the shell on the
remote node is the same as the shell on the local node. Otherwise,
probe for what the remote shell.
MCA pls: parameter "pls_rsh_agent" (current value: "ssh
: rsh")
The command used to launch executables on
remote nodes (typically either "ssh" or "rsh")
MCA pls: parameter "pls_xgrid_orted" (current value:
"orted")
MCA pls: parameter "pls_xgrid_priority" (current value:
"20")
MCA pls: parameter "pls_xgrid_delete_job" (current
value: "1")
MCA sds: parameter "sds" (current value: <none>)
Default selection set of components for the
sds framework (<none> means "use all components that can be found")
MCA sds: parameter "sds_base_verbose" (current value:
"0")
Verbosity level for the sds framework (0 = no
verbosity)
MCA sds: parameter "sds_env_priority" (current value:
"0")
MCA sds: parameter "sds_pipe_priority" (current value:
"0")
MCA sds: parameter "sds_seed_priority" (current value:
"0")
MCA sds: parameter "sds_singleton_priority" (current
value: "0")
MCA soh: parameter "soh" (current value: <none>)
Default selection set of components for the
soh framework (<none> means "use all components that can be found")
