Hello members,
I have deployed CPE's of two different vendor and I want to provision both types with two different presets after the CPE sends first inform event. How can I make first vendors CPE triggers preset1 and second vendors triggers preset 2 with both sending inform events. I saw provisioning script written by DAN which is same like my scenario but without fetching vlan and different tagging . As I am not so good in coding, so please help me out with provisioning script for this scenario. -PPPoE credentials, vlan-id, service profile( eg, internet, iptv) are stored in our subscriber management system(SMS). So the script should fetched those values(pppoe credentials and vlan-id only) and set it accordingly on CPE if the service profile value is "internet" only. If there is both service profile (i.e internet and iptv) then it should set parameters ( different vlan-id for IPTV on different interfaces with bridge mode enabled.) for both service in two different interfaces and add two TAG as INTERNET-PROVISIONED and IPTV-PROVISIONED. If the service is "internet" only then tag should be INTERNET-PROVISIONED only. Best Regards, SISIR TIWARI
_______________________________________________ Users mailing list [email protected] http://lists.genieacs.com/mailman/listinfo/users
