On 27.10.2014 03:25, jd1008 wrote: > > On 10/26/2014 08:15 PM, poma wrote: >> On 27.10.2014 02:24, jd1008 wrote: >>> On 10/26/2014 05:38 PM, poma wrote: >>>> - station(client) mode >>>> $ modinfo r8712u >>>> filename: >>>> /lib/modules/3.17.1-202.fc20.x86_64/kernel/drivers/staging/rtl8712/r8712u.ko.xz >>>> firmware: rtlwifi/rtl8712u.bin >>>> author: Larry Finger >>>> description: rtl871x wireless lan driver >>>> license: GPL >>>> >>>> - master(AP) mode >>>> $ modinfo rtl8192su >>>> filename: /lib/modules/3.17.1-202.fc20.x86_64/updates/rtl8192su.ko >>>> firmware: rtlwifi/rtl8192sufw.bin >>>> description: Realtek 8188S/8191S/8192S 802.11n USB wireless >>>> license: GPL >>>> author: Christian Lamparter <chunk...@googlemail.com> >>>> author: Joshua Roys <joshua.r...@gtri.gatech.edu> >>>> author: Larry Finger <larry.fin...@lwfinger.net> >>>> author: Realtek WlanFAE <wlan...@realtek.com> >>>> author: lizhaoming <chaoming...@realsil.com.cn> >>>> >>>> >>>> http://wireless.kernel.org/en/users/Drivers/rtl819x >>>> https://wiki.debian.org/rtl819x >>>> >>>> >>>> poma >>> must I manually install kernel 17? It is not yet in the updates repo: >>> >>> # yum update >>> Loaded plugins: langpacks, refresh-packagekit >>> adobe-linux-x86_64 | 951 B 00:00:00 >>> google-earth | 951 B 00:00:00 >>> rpmfusion-free-updates | 3.3 kB 00:00:00 >>> rpmfusion-nonfree-updates | 3.3 kB 00:00:00 >>> updates/20/x86_64/metalink | 19 kB 00:00:00 >>> No packages marked for update >>> >> Forget the kernel version, it doesn't matter, I'm just showing what I >> currently drive. >> The question is do you need a: >> 1. Station mode >> or >> 2. Access Point mode >> or >> 3. Both >> >> See http://wireless.kernel.org/en/users/Documentation/modes >> >> BTW paste here 'lsusb' output >> >> >> poma >> > # lsusb > Bus 002 Device 007: ID 07d1:3304 D-Link System FR-300USB 802.11bgn > Wireless Adapter<<<<<<this is the dongle in question.
Bus 002 Device 007: ID 07d1:3304 D-Link System FR-300USB 802.11bgn Wireless Adapter https://git.kernel.org/cgit/linux/kernel/git/iwlwifi/iwlwifi-next.git/tree/drivers/staging/rtl8712/usb_intf.c#n70 /* D-Link */ {USB_DEVICE(0x2001, 0x3306)}, {USB_DEVICE(0x07D1, 0x3306)}, /* 11n mode disable */ https://git.kernel.org/cgit/linux/kernel/git/iwlwifi/iwlwifi-next.git/tree/drivers/staging/rtl8712/usb_intf.c#n126 /* D-Link */ {USB_DEVICE(0x07D1, 0x3302)}, {USB_DEVICE(0x07D1, 0x3300)}, {USB_DEVICE(0x07D1, 0x3303)}, https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-bus-usb ... What: /sys/bus/usb/drivers/.../new_id Date: October 2011 Contact: linux-...@vger.kernel.org Description: Writing a device ID to this file will attempt to dynamically add a new device ID to a USB device driver. This may allow the driver to support more hardware than was included in the driver's static device ID support table at compile time. The format for the device ID is: idVendor idProduct bInterfaceClass RefIdVendor RefIdProduct The vendor ID and device ID fields are required, the rest is optional. The Ref* tuple can be used to tell the driver to use the same driver_data for the new device as it is used for the reference device. Upon successfully adding an ID, the driver will probe for the device and attempt to bind to it. For example: ... # modprobe -v r8712u insmod /lib/modules/3.17.1-202.fc20.x86_64/kernel/drivers/staging/rtl8712/r8712u.ko.xz # ls /sys/bus/usb/drivers/r8712u/new_id /sys/bus/usb/drivers/r8712u/new_id # echo "07d1 3304" > /sys/bus/usb/drivers/r8712u/new_id # cat /sys/bus/usb/drivers/r8712u/new_id 07d1 3304 # dmesg | grep r8712u -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
