I've been looking at /var/log/messages and this has come up several times:

 udisksd[1635]: Error performing housekeeping for drive
/org/freedesktop/UDisks2/drives/WDC_WD1600JD_00HBB0_WD_WCAL93183730:
Error updating SMART data: sk_disk_smart_status: Input/output error
(udisks-error-quark, 0)


Is it anything meaningful?

Data from smartctl:

$ sudo smartctl --all /dev/sdb
smartctl 5.43 2012-06-30 r3573 [i686-linux-3.5.0-2.fc17.i686.PAE] (local
build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE Serial ATA
Device Model:     WDC WD1600JD-00HBB0
Serial Number:    WD-WCAL93183730
Firmware Version: 08.02D08
User Capacity:    160,041,885,696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Thu Aug  2 15:16:23 2012 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting 
command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine
completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                ( 4467) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  60) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   200   051    Pre-fail  Always
      -       0
  3 Spin_Up_Time            0x0007   179   160   021    Pre-fail  Always
      -       3575
  4 Start_Stop_Count        0x0032   098   098   040    Old_age   Always
      -       2012
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always
      -       0
  7 Seek_Error_Rate         0x000b   200   200   051    Pre-fail  Always
      -       0
  9 Power_On_Hours          0x0032   019   019   000    Old_age   Always
      -       59419
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always
      -       0
 11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always
      -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always
      -       671
194 Temperature_Celsius     0x0022   107   096   000    Old_age   Always
      -       43
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always
      -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always
      -       0
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always
      -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always
      -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail
Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining
LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     43005
     -
# 2  Extended offline    Completed without error       00%     36176
     -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[sdstern@sds-desk ~]$
$ sudo smartctl --all /dev/sdb
smartctl 5.43 2012-06-30 r3573 [i686-linux-3.5.0-2.fc17.i686.PAE] (local
build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE Serial ATA
Device Model:     WDC WD1600JD-00HBB0
Serial Number:    WD-WCAL93183730
Firmware Version: 08.02D08
User Capacity:    160,041,885,696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Thu Aug  2 15:16:23 2012 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting 
command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine
completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                ( 4467) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  60) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   200   051    Pre-fail  Always
      -       0
  3 Spin_Up_Time            0x0007   179   160   021    Pre-fail  Always
      -       3575
  4 Start_Stop_Count        0x0032   098   098   040    Old_age   Always
      -       2012
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always
      -       0
  7 Seek_Error_Rate         0x000b   200   200   051    Pre-fail  Always
      -       0
  9 Power_On_Hours          0x0032   019   019   000    Old_age   Always
      -       59419
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always
      -       0
 11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always
      -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always
      -       671
194 Temperature_Celsius     0x0022   107   096   000    Old_age   Always
      -       43
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always
      -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always
      -       0
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always
      -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always
      -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail
Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining
LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     43005
     -
# 2  Extended offline    Completed without error       00%     36176
     -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



-- 
-- Steve
-- 
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org

Reply via email to