>> for better performance you could use RAID10 in the far layout instead >> (raid10,f2), >> this is a direct replacement with the enhanced raid10 driver, which gives >> double >> the sequential read speed compared to raid1. Use "--level=10 -p f2" as >> additional >> parameters when creating arrays with mdadm.
hmm is there a way to change this in an existing RAID10?
i think i would like this for / where read-performance is much
more important and /dev/md2 is perfectly with near-layout
for write-performance (hughe data, virtual machines)
________________
[root@raid ~]# mdadm --grow /dev/md1 --level=10 -p f2
mdadm: RAID10 can only be changed to RAID0
[root@raid ~]# mdadm --grow /dev/md1 -p f2
mdadm: RAID10 can only be changed to RAID0
[root@raid ~]# mdadm --misc /dev/md1 -p f2
mdadm: option -p not valid in misc mode
________________
md2 : active raid10 sdc3[0] sdd3[3] sda3[4] sdb3[5]
3875222528 blocks super 1.1 512K chunks 2 near-copies [4/4] [UUUU]
bitmap: 7/29 pages [28KB], 65536KB chunk
md1 : active raid10 sdc2[0] sdd2[3] sda2[4] sdb2[5]
30716928 blocks super 1.1 512K chunks 2 near-copies [4/4] [UUUU]
bitmap: 1/1 pages [4KB], 65536KB chunk
md0 : active raid1 sdc1[0] sdd1[3] sda1[4] sdb1[5]
511988 blocks super 1.0 [4/4] [UUUU]
signature.asc
Description: OpenPGP digital signature
-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
