What does ethtool -g em1 say? A very common reason of dropping packets is that the rx and tx buffers have been full. In this case, you can increase the count with ethtool -G switch and check again.
-- Soham On Sat, Oct 15, 2011 at 4:47 PM, Benjamin <benjo11...@gmail.com> wrote: > Hi, > > lspci -v > > > > 05:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network > Connection > Subsystem: Super Micro Computer Inc Device 040d > Flags: bus master, fast devsel, latency 0, IRQ 18 > Memory at fb5e0000 (32-bit, non-prefetchable) [size=128K] > I/O ports at dc00 [size=32] > Memory at fb5dc000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [c8] Power Management version 2 > Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+ > Capabilities: [e0] Express Endpoint, MSI 00 > Capabilities: [a0] MSI-X: Enable+ Count=5 Masked- > Capabilities: [100] Advanced Error Reporting > Capabilities: [140] Device Serial Number 00-25-90-ff-ff-39-70-0e > Kernel driver in use: e1000e > Kernel modules: e1000e > > > Thanks, > Benjamin > > > > On 10/15/2011 04:41 PM, Reindl Harald wrote: > > Am 15.10.2011 13:09, schrieb Benjamin: > >> OS : FEDORA 15 64 BIT > >> LAN INTERFACE IS ONBOARD GIGABIT LAN CARD > > this is no information > > > > WHAT network-card is on the board? > > lspci is your friend! > > > > > > > > > > -- > users mailing list > users@lists.fedoraproject.org > To unsubscribe or change subscription options: > https://admin.fedoraproject.org/mailman/listinfo/users > Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines >
-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
