On Tue, Jul 5, 2011 at 10:03 AM, Reindl Harald <h.rei...@thelounge.net> wrote: > Am 05.07.2011 15:50, schrieb Thomas Schweikle: >> >> Since I could not find a working Howto for Fedora 15: >> >> How do I install networking without having gui or tui tools >> available? Even without having the ability to use them (if they >> where installed)? >> >> I could not find any description not using gui setup tools ... :-( > > echo "DEVICE=eth0" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "IPADDR=10.0.0.99" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "NETWORK=10.0.0.0" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "GATEWAY=10.0.0.1" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "BROADCAST=10.0.0.255" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "NETMASK=255.255.255.0" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "TYPE=Ethernet" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "BOOTPROTO=static" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "ONBOOT=yes" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "NM_CONTROLLED=no" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "USERCTL=no" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "IPV6INIT=no" > /etc/sysconfig/network-scripts/ifcfg-eth0 > echo "IPV6_AUTOCONF=no" > /etc/sysconfig/network-scripts/ifcfg-eth0 > /etc/init.d/network start
In your cut/paste, you forgot to change ">" to ">>". :) Why not use "cat > /etc/sysconfig/network-scripts/ifcfg-eth0 <<EOF" or vi? -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
