Hi, For me no issues to recive the logs.anyway, i have performed the following steps again,
1.Stop the "dirsrv" on both sides. 2.Enabled "nsslapd-errorlog-level: 8192" on both servers in "dse.ldif" file. 3.Started the "dirsrv" on both servers. 4.Export the datas in .ldif and imported to "sam" system 4.From "varad.xxx.xxx.com,Remove the agreement again (./mmr.pl --host1 varad.xxx.xxx.com --host2 sam.xxx.xxx.com --host1_id 1 --host2_id 2 --bindpw <password> --repmanpw <password> --remove) 5.From "varad.xxx.xxx.com,Created agreement again (./mmr.pl --host1 varad.xxx.xxx.com --host2 sam.xxx.xxx.com --host1_id 1 --host2_id 2 --bindpw <password> --repmanpw <password> --create) 6.Then created one user under "ou=people" , as a uid=TT in supplier side ( varad.xxx.xxx.com) 7.but not replicated in other system... Supplier system (/var/log/dirsrv/slapd-varad/errors): (varad.xxx.xxx.com): [16/Jun/2011:18:36:48 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): Disconnected from the consumer [16/Jun/2011:18:36:48 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): State: start -> ready_to_acquire_replica [16/Jun/2011:18:36:48 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): State: ready_to_acquire_replica -> wait_for_changes [16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): State: wait_for_changes -> wait_for_changes [16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): State: wait_for_changes -> start [16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): No linger to cancel on the connection [16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): Disconnected from the consumer [16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): State: start -> ready_to_acquire_replica [16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from varad.xxx.xxx.com port 389 to sam.xxx.xxx.com port 389"" (sam:389): State: ready_to_acquire_replica -> wait_for_changes Consumer system: (sam.xxx.xxx.xom): [16/Jun/2011:18:46:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): Disconnected from the consumer [16/Jun/2011:18:46:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): State: start -> ready_to_acquire_replica [16/Jun/2011:18:46:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): State: ready_to_acquire_replica -> wait_for_changes [16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): State: wait_for_changes -> wait_for_changes [16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): State: wait_for_changes -> start [16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): No linger to cancel on the connection [16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): Disconnected from the consumer [16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): State: start -> ready_to_acquire_replica [16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from sam.xxx.xxx.com port 389 to varad.xxx.xxx.com port 389"" (varad:389): State: ready_to_acquire_replica -> wait_for_changes So,please let me know what is the problem ? and how to resolve ? Regards, Varad On Wed, Jun 15, 2011 at 7:41 PM, Rich Megginson <rmegg...@redhat.com> wrote: > ** > On 06/14/2011 11:59 PM, s.varadha rajan wrote: > > Hi, > > Thanks for the reply.that's ok.but if i create one new user in supplier > side,it's not replicating to consumer side.i think ubuntu 10.04 LTS supports > fedora-ds 1.1.x and dont have updated ppa links. for this case, shall i > upgrade the latest version, will give the solution? After upgrade, how can i > migrate my existing data. > > First check your errors log on your supplier side to see if there are any > errors during the incremental update phase (the messages below are from the > init phase), then check the access log on the consumer side to see if the > supplier is connecting and attempting to send the new user. > > If that shows nothing, then try enabling the replication log level - > http://directory.fedoraproject.org/wiki/FAQ#Troubleshooting > > > or give me a solution for this. > > Regards, > Varad > > > On Tue, Jun 14, 2011 at 8:26 PM, Rich Megginson <rmegg...@redhat.com>wrote: > >> On 06/14/2011 08:23 AM, s.varadha rajan wrote: >> >> Hi, >> >> I followed the procedure to configure "multi-master replication" as per >> http://directory.fedoraproject.org/wiki/Howto:MultiMasterReplication. but >> i got an error as >> >> *From consumer side:* >> >> 14/Jun/2011:19:25:41 +051800] NSMMReplicationPlugin - >> multimaster_be_state_change: replica o=netscaperoot is coming online; >> enabling replication >> [14/Jun/2011:19:25:41 +051800] NSMMReplicationPlugin - replica_reload_ruv: >> Warning: new data for replica o=netscaperoot does not match the data in the >> changelog. >> Recreating the changelog file. This could affect replication with >> replica's consumers in which case the consumers should be reinitialized. >> >> This is not an error. It just means the consumer has been initialized >> with data from the master, and it had old data (probably from setup) which >> was wiped out. >> >> >> *From Supplier side:* >> >> [14/Jun/2011:19:26:12 +051800] NSMMReplicationPlugin - Beginning total >> update of replica "agmt="cn="Replication from varad.xxx.xxx.com port 389 >> to sam.xxx.xxx.com port 389"" (sam:389)". >> [14/Jun/2011:19:26:15 +051800] NSMMReplicationPlugin - Finished total >> update of replica "agmt="cn="Replication from varad.xxx.xxx.com port 389 >> to sam.xxx.xxx.com port 389"" (sam:389)". Sent 120 entries. >> >> >> We are using the OS-Ubuntu 10.04. I searched in google and got the some >> result in "https://bugzilla.redhat.com/show_bug.cgi?id=388021";. but i >> dont know how to fix this.Please help on this. >> >> Regards, >> Varad >> >> >> >> >> >> >> >> >> On Mon, May 30, 2011 at 12:27 PM, s.varadha rajan <rajanvara...@gmail.com> >> wrote: >> > >> > Hi, >> > >> > Thanks for the reply.I will try and update you further. >> > >> > Regards, >> > Varad >> > >> > >> > >> > On Fri, May 27, 2011 at 8:30 PM, Rich Megginson <rmegg...@redhat.com> >> wrote: >> >> >> >> On 05/27/2011 12:11 AM, s.varadha rajan wrote: >> >> >> >> Hi, >> >> >> >> Can i get any update on my below query ? >> >> >> >> Regards, >> >> Varad >> >> >> >> On Tue, May 24, 2011 at 6:17 PM, s.varadha rajan < >> rajanvara...@gmail.com> wrote: >> >>> >> >>> Hi, >> >>> We are using Ubuntu 10.04 server OS and all the web applications are >> running on that.We have already implemented fedora-ds for ldap auth.now we >> are planning to go some up-gradation.kindly let me know the following, >> >>> 1.How to migrate running fedora-ds server to another server ? >> >>> 2.i have taken all the user/group+etc in ldif format.is it enough for >> migration or any other db (/var/lib/dirsrv/slapd-<instance>) also need to >> bacup ? >> >> >> >> LDIF should be fine. >> >>> >> >>> if any procedure please share with me ? how to import/export .ldif >> file >> >> >> >> /usr/lib[64]/dirsrv/slapd-INSTNAME/db2ldif - export database to ldif >> >> /usr/lib[64]/dirsrv/slapd-INSTNAME/ldif2db - import database from ldif >> >>> >> >>> 3.in our setup,one server is in public network.so i am planning to do >> replication through "ldaps", i.e local server to public server replication >> through highly secure how to ? >> >> >> >> Not exactly, but there is plenty of documentation - see >> http://docs.redhat.com/docs/en-US/Red_Hat_Directory_Server/8.2/html-single/Administration_Guide/index.html#Managing_Replication-Replication_Overview >> >>> >> >>> Please help me on the above topics. >> >>> Regards, >> >>> Varad >> >> >> >> -- >> >> 389 users mailing list >> >> 389-us...@lists.fedoraproject.org >> >> https://admin.fedoraproject.org/mailman/listinfo/389-users >> > >> >> >> > >
-- 389 users mailing list 389-us...@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/389-users
