On 1/24/2011 2:06 PM, JB wrote:
> I am looking at kernel parameters and Fedora kernel problems - there is so
> much of it that could go wrong that the head is spinning.
>
> Let's hope that Alan finds time to come back to the thread - he is the real
> expert here.
>
> I will continue looking into it as well, so stick around. Will try something.
>
> JB

     At the moment, CentOS is running with:

     Kernel command line: ro root=LABEL=/ ide=nodma noapic acpi=off apm=off

     I just added the apm option at the last reboot because I was seeing 
errors in dmesg - not that it was causing any harm, but at the same 
time, i couldn't care less for apm on this machine.

     The one thing I'm noticing is, even though I have acpi=off, I still 
see this as well:

     ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
     ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
     ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
     ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
     PCI: Firmware left 0000:00:03.0 e100 interrupts enabled, disabling
     ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
     ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
     ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
     ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
     ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
     ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
     PCI: Firmware left 0000:01:04.0 e100 interrupts enabled, disabling
     ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
     PCI: Firmware left 0000:01:05.0 e100 interrupts enabled, disabling

     This machine has one on-board e100 and an add-in card with 2 e100 
on it.  That's what the above errors message are referring to.  If I 
remove the add-on card, the error message appears only once, referring 
to the on-board e100.  I swapped the card for a brand new one and the 
same 2 errors re-appeared (bringing the total to 3).  Card and on-board 
appear to be working just fine though ...

-- 
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines

Reply via email to