On Wed, 18 Aug 2010 11:44:53 +1000 David <bouncingc...@gmail.com> wrote:
> On 18 August 2010 09:22, Bill Davidsen <david...@tmr.com> wrote: > >> > > If this line is for real: > > 194 Temperature_Celsius 0x0022 116 253 000 Old_age > > Always > > - 34 > > > > Then your drive is running hotter than boiling water and has been > > close to melting point of solder. In spite of that the error count > > is fine, but holding your hand an inch or so from the drive should > > tell you if this is that hot. > > Having rtfm, I think the values reported there are normalised values, > not degrees Celsius. > > See > http://sourceforge.net/apps/trac/smartmontools/wiki/FAQ#Whyismydisktemperaturesreportedbysmartdas150Celsius > > and read 'man smartctl' under option -A David, thanks for the link and yes, you are correct. I have now modified my /etc/smartd.conf file and added -r 194 which should make the temps get reported in raw format. ie degC. /dev/sdb -a -d sat -H -r 194 -m root sensors indicated the the CPU fan and the power supply rails are monitored. Does anyone know if I can put something in smartd.conf to get reports on them and if so what? Thanks, Steve -- Changing lives one card at a time http://www.send1cardnow.com
signature.asc
Description: PGP signature
-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
