On 4/6/25 3:11 AM, Tim wrote:
Tim:
Your cause could be external. Someone bumping a cable, loose power
socket to a network switch, failing network switch, network switch not
liking glitches on the mains, cleaning unplugging something to plug
their vacuum into.
ToddAndMargo:
Is everything on the UPS, computer and hub?
Server, monitor, hub, firewall, microwave modem.
Nothing else.
I'd also check all plugs and sockets are firm.
I was the one that did that. They are all in tight.
The hub is getting long the tooth. Maybe I should have that replaced
too.
What do you think of this one?
https://www.trendnet.com/products/gigabit-switch/24-port-gigabit-desktop-switch-TEG-S25D
Sorry, unfamiliar with it.
I've had to replace network switches a few times when they spanned
between buildings. You could see the LEDs on one of the ports madly
blinking when it got damaged (see: "flapping"). Power cycling it would
reset things back to normal, but over time failures became permanent.
This hub is over 11 yeas old. I never was happy with it to start with.
Outside network cabling is vulnerable to things like somewhat-near
lighting, and wind blowing over it causing hight static electricity
voltages. And you can have mains wiring problems between buildings,
within a building, or even within a room (if it spans a phase) cause
problems with equipment joined together by network cabling.
Outside cabling does not affect the internal network. I
am able to RDP and AnyDesk into all the workstations
when this happens
--
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Do not reply to spam, report it:
https://pagure.io/fedora-infrastructure/new_issue
