On 3/1/25 7:03 AM, Patrick Dupre via users wrote:
I have 2 PC A and B.
Before A what connected to the world wireless
and PC B was connected through an internet cable (wired).
PC A lost its wireless connection.
Now PC B is connected to the world through a telephone and I want to
have PC A connected also through the same internet cable and access to the
world.
On PC A I activated Automatic DHCP
and on PC B and the internet card 10.42.0.1 shared to other computers (IP)
It connects
inet 10.42.0.1 netmask 255.255.255.0 broadcast 10.42.0.255
but PC B cannot connect (connection fails)
I just tested this setup and it works with no problem.
I don't have wifi on the desktop, just two ethernet ports, but it should
be the same.
One ethernet port goes to "the internet" (internal network, but same).
The other ethernet port I configured in the Gnome network manager as
"shared to other computers". I then plugged a laptop into that ethernet
port and it had internet access.
So I'm not sure where you went wrong.
For PC C to have access, you have a couple of options. You could
configure the two ethernet ports on PC A as a bridge or you could again
configure the second ethernet port as shared.
--
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Do not reply to spam, report it:
https://pagure.io/fedora-infrastructure/new_issue
