On 3/1/25 4:18 PM, Will McDonald wrote:
On Sat, 1 Mar 2025 at 22:22, Patrick Dupre via users
<users@lists.fedoraproject.org <mailto:users@lists.fedoraproject.org>>
wrote:
I am lost.
I had a configuration with was working, but my usb WiFi doogle does
not work anymore.
The configuration which was working
Doogle on PC A with 2 ethernet cards.
One connected to PC B: a laptop
one connected to PC C
Now, The laptop PC B is connect to a wifi mobile.
It works
wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.43.115 netmask 255.255.255.0 broadcast
192.168.43.255
I set the ethernet interface "shared to other computers"
enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.42.0.1 netmask 255.255.255.0 broadcast 10.42.0.255
Now I am trying to connect this ethernet card to PC A
>From the network interface, It tried
"shared to other computers"
and
"Automatic (DHCP)",
but none of them allow me to make the connection
(connecting for ever).
Hence, I tried manually
10.42.0.5 255.255.255.0
It connected
enp1s0 flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.42.0.5 netmask 255.255.255.0 broadcast 10.42.0.255
But the 2 computers do not talk together
>From PC B to PC A:
ping 10.42.0.5
PING 10.42.0.5 (10.42.0.5) 56(84) bytes of data.
>From 10.42.0.1 icmp_seq=1 Destination Host Unreachable
traceroute to 10.42.0.5 (10.42.0.5), 30 hops max, 60 byte packets
1 Sappho (10.42.0.1) 3068.823 ms !H 3068.691 ms !H 3068.614 ms !H
route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
Use Iface
0.0.0.0 192.168.43.1 0.0.0.0 UG 600 0
0 wlp2s0
10.42.0.0 0.0.0.0 255.255.255.0 U 100 0
0 enp3s0
192.168.43.0 0.0.0.0 255.255.255.0 U 600 0
0 wlp2s0
>From PC A to PC B:
same behavior
route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
Use Iface
10.42.0.0 0.0.0.0 255.255.255.0 U 100 0
0 enpls0
192.168.122.0 0.0.0.0 255.255.255.0 U 600 0
0 virbr0
I think if I'm reading your description correctly, this is roughly your
topology and addressing?
https://photos.app.goo.gl/sWCqtQNNBBzBuGWk9 <https://photos.app.goo.gl/
sWCqtQNNBBzBuGWk9>
If my understanding is correct
- the default gateway (0.0.0.0) from PC A (10.42.0.5) needs to be PC B
(10.42.0.1)
Yes, DHCP should be working which would set the gateway, but he manually
configured it and probably didn't put the gateway. Even without the
gateway, the ping should have worked.
- you probably don't want 192.168.0.122.0 to be a gateway configured on PC A
That's not a gateway. That's the VM bridge interface with no gateway.
- you probably need ip_forwarding (net.ipv4.ip_forward) enabled on PC B
if it's being used as an ersatz router
That should have already been set by using the sharing option.
--
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Do not reply to spam, report it:
https://pagure.io/fedora-infrastructure/new_issue
