Jon LaBadie <j...@labadie.us> wrote: >> Might the printer need its configuration/settings changed >> to connect to the new network?
Geoffrey Leach: > Here's the problem > traceroute pvr > traceroute to pvr (10.0.0.5), 30 hops max, 60 byte packets > 1 _gateway (192.168.2.1) 20.167 ms 20.130 ms 20.122 ms > 2 .... > > (pvr is another box, configured for the same local net) > > So, the route leaves the local net and wanders off into the ether.. > > So is there a local fix, or did I got what I asked for, just not what I > wanted. I'm presuming that previously all your local traffic went through your modem/router, with it just being a link to the Starlink device. And now you've removed that modem and just use the Starlink device by itself. It could be that the Starlink device treats the 2.4 and 5 GHz networks as completely separate and won't communicate between them. Or it could be treating all traffic on its WiFi like that (guest or private networking). It could also do what one of my dual-band routers did, and try to kick everything off the 2.4 GHz carrier onto the 5 GHz carrier (bandsteering). The trouble is various devices are 2.4 GHz-only and can't do that. You could look for options like that (guest/private networking, bandsteering) on the Starlink device. It's quite likely that all you have to do is change your LAN IP addresses to use the same private IP range as the Starlink device. Mixing 192.168.2.x and 10.0.0.y together without a suitable gateway *between* them is just not going to work. You could go back to using your modem as your local access point. There are some advantages to using some separate kind of LAN hub outside of your ISP device. * You can reboot the ISP device without killing all your LAN traffic. * You can probably get a better router than theirs, more configurable, able to handle more simultaneous connections, stronger WiFi, etc. * You can change ISPs without having to reconfigure your whole LAN around it (their supplied device might require a different local IP numbering scheme, they'll change your SSID, etc). There are disadvantages, too. Such as NAT can be a pain for things like FTP, double-NAT can be even worse. -- uname -rsvp Linux 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64 Boilerplate: All unexpected mail to my mailbox is automatically deleted. I will only get to see the messages that are posted to the mailing list. -- _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
