On Sun, Jul 7, 2024, at 7:31 AM, Doug Herr wrote:
> On Sun, Jul 7, 2024, at 4:17 AM, Jonathan Billings wrote:
>> On Jul 7, 2024, at 04:24, François Patte 
>> <francois.pa...@mi.parisdescartes.fr> wrote:
>>> 
>>> Le 2024-07-06 23:20, Samuel Sieb a écrit :
>>>>> On 7/6/24 3:13 AM, François Patte wrote:
>>>>> Le 2024-07-06 09:43, Mike Wright a écrit :
>>>>>> On 7/6/24 00:37, François Patte wrote:
>>>>>>> Bonjour,
>>>>>>> On another post I complained that I couldn't install f40 due, I 
>>>>>>> thought, to existing partitions on a disk...
>>>>>>> I tried to install on new disks without anything on them and used 
>>>>>>> blivet-gui to define the partitions: I want RAID1 arrays, so I defined 
>>>>>>> each of them asking for RAID1 on two disks and ext4 or luks file system.
>
>
> It *can* be done. These are my notes from a VirtualBox install / test...
>
>
> Basic EFI install on dual raid1. Just need /boot/efi and /
> -
> Use Blivet/Advanced partition thing.
> 1 Raid 1, efi partition, on /boot/efi
> 2 Raid 1, ext4 on /
> -
> /boot/efi is raid version 1.0
> Root is version 1.2
> -
> $ cat /proc/mdstat 
> Personalities : [raid1] 
> md126 : active raid1 sdb1[1] sda1[0]
>       204736 blocks super 1.0 [2/2] [UU]
>       bitmap: 0/1 pages [0KB], 65536KB chunk
>
> md127 : active raid1 sda2[0] sdb2[1]
>       15512576 blocks super 1.2 [2/2] [UU]
>       bitmap: 1/1 pages [4KB], 65536KB chunk
>
> unused devices: <none>
> -
> $ df -hT
> Filesystem     Type      Size  Used Avail Use% Mounted on
> /dev/md127     ext4       15G  4.2G  9.6G  31% /
> devtmpfs       devtmpfs  4.0M     0  4.0M   0% /dev
> tmpfs          tmpfs     974M     0  974M   0% /dev/shm
> efivarfs       efivarfs  256K   35K  217K  14% /sys/firmware/efi/efivars
> tmpfs          tmpfs     390M  1.2M  389M   1% /run
> tmpfs          tmpfs     974M   40K  974M   1% /tmp
> /dev/md126     vfat      200M  7.5M  193M   4% /boot/efi
> tmpfs          tmpfs     195M  120K  195M   1% /run/user/1000

Note that the LUKS addition would likely require a non-LUKS /boot, but I have 
not worked with that so don't know for sure.

I was just working toward switching from "legacy bios" to EFI and wanted to 
keep everything on RAID 1.
-- 
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct: 
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: 
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Do not reply to spam, report it: 
https://pagure.io/fedora-infrastructure/new_issue

Reply via email to