On Wed, May 15, 2024 at 2:06 PM Meikel <mei...@fn.de> wrote: > Hi folks, > > I have an ASUS N550JK laptop running Fedora XFCE. I didn't use it for > some months. It was running Fedora 39 XFCE. Today I did an update. After > the update it hangs on boot. Because I removed "rhgb quiet" from > GRUB_CMDLINE_LINUX I can see messages while the system boots. It seems > that it hangs after a message like > > ... nouveau ... Enabling HDA controller > > As "nouveau" seems to be a driver for the graphic card and I can also > see that the update probably installed a newer kernel > 6.8.9-200.fc39.x86_64 I did a reboot with choosing an older kernel > 6.6.9-200.fc39.x86_64 from boot menu. With this older kernel the system > is able to boot without problems. > > Then I did an upgrade to Fedora 40 XFCE because I hoped that this could > fix the problem. But with Fedora 40 I have the same problem. On starting > with the now very new kernel 6.8.9-300.fc40.x86_64 it hangs on boot with > the same message > > ... nouveau ... Enabling HDA controller > > If I start Fedora 40 with the older kernel 6.6.9-200.fc39.x86_64 from > boot menu then the system boots without problems. > > For providing you some information about the hardware, I did run > > sudo dmidecode > > but this gives very very much information. Here is only a short snippet > with some basic information: > > System Information > Manufacturer: ASUSTeK COMPUTER INC. > Product Name: N550JK > Version: 1.0 > SKU Number: ASUS-NotebookSKU > Family: N > > To find something about the graphic card I did run > > dmesg | grep nouveau > > and in the very first line I can see that it seems to be a NVIDIA GM107 > (117110a2): > > [ 2.426287] nouveau 0000:01:00.0: NVIDIA GM107 (117110a2) > [ 2.442106] nouveau 0000:01:00.0: bios: version 82.07.2a.00.02 > [ 2.526832] nouveau 0000:01:00.0: fb: 2048 MiB DDR3 > [ 2.526889] nouveau 0000:01:00.0: bus: MMIO read of 00000000 > FAULT at 022554 [ PRIVRING ] > [ 3.197385] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB > [ 3.197387] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB > [ 3.197389] nouveau 0000:01:00.0: DRM: Pointer to TMDS table not > found > [ 3.197390] nouveau 0000:01:00.0: DRM: DCB version 4.0 > [ 3.198239] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer > copies > [ 3.198466] [drm] Initialized nouveau 1.4.0 20120801 for > 0000:01:00.0 on minor 1 > [ 3.198535] nouveau 0000:01:00.0: [drm] No compatible format found > [ 3.198537] nouveau 0000:01:00.0: [drm] Cannot find any crtc or > sizes > [ 52.988052] nouveau 0000:01:00.0: Enabling HDA controller > [ 59.107580] nouveau 0000:01:00.0: Enabling HDA controller > [ 59.227433] nouveau 0000:01:00.0: bus: MMIO read of 00000000 > FAULT at 619444 [ PRIVRING ] > [ 97.171565] nouveau 0000:01:00.0: Enabling HDA controller > [ 97.288155] nouveau 0000:01:00.0: bus: MMIO read of 00000000 > FAULT at 619444 [ PRIVRING ] > > I do not want to manually choose the kernel each time when I boot the > computer. What can I do? >
Are you using sddm? There are reports that nouveau doesn't work with sddm. -- George N. White III
-- _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
