On 11/06/2021 18:08, Stephen Morris wrote:
My issue with the system settings under both gnome and kde, is I am using a 4K monitor and the system settings don't offer a 4K resolution, even if the vm is running fullscreen, and also neither does xrandr specify that a 4K resolution is available. The system settings only show that a 4K resolution is accessible when I put in the relevant modeline. The system settings also only show a resolution of 3840x2075 which is the maximum resolution under gnome if I run the vm windowed, or 3840x2069 which is the same maximum resolution under KDE (I'm not sure yet why there is this difference), if I put in modelines.
Are you running KDE and GNOME from the same VM image? Meaning you're running KDE with gdm? Sometimes the below works, and sometimes it doesn't. With nVidia drivers it fails, with nouveau it works. Can you install monitor-edid. Then do something like I've done on laptop. [root@acer ~]# monitor-get-edid | monitor-parse-edid EISA ID: CMO1552 EDID version: 1.3 EDID extension blocks: 0 Screen size: 33.1 cm x 20.7 cm (15.37 inches, aspect ratio 16/10 = 1.60) Gamma: 2.2 Digital signal # Monitor preferred modeline (59.9 Hz vsync, 49.3 kHz hsync, ratio 16/10, 98 dpi) ModeLine "1280x800" 71 1280 1328 1360 1440 800 803 809 823 -hsync -vsync -- Remind me to ignore comments which aren't germane to the thread. _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
