On 2020-06-02 12:51, stan via users wrote: ^
The vvv is important, because it provides more information, including an
output profile over time, a rough vu meter. That is, it will show if
aplay is actually sending output to the device.
[bobg@Workstation-1 ~]$ aplay -vvv apps/audio/login.wav
Playing WAVE 'apps/audio/login.wav' : Signed 16 bit Little Endian, Rate
22050 Hz, Stereo
ALSA <-> PulseAudio PCM I/O Plugin
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 22050
exact rate : 22050 (22050/1)
msbits : 16
buffer_size : 11025
period_size : 2756
period_time : 125000
tstamp_mode : NONE
tstamp_type : GETTIMEOFDAY
period_step : 1
avail_min : 2756
period_event : 0
start_threshold : 11025
stop_threshold : 11025
silence_threshold: 0
silence_size : 0
boundary : 6206523236469964800
Max peak (5512 samples): 0x00002334 ###### 27%
Max peak (5512 samples): 0x00001b62 ##### 21%
Max peak (5512 samples): 0x00002e56 ######## 36%
Max peak (5512 samples): 0x000024c0 ###### 28%
Max peak (5512 samples): 0x00003016 ######## 37%
Max peak (5512 samples): 0x00002bb5 ####### 34%
Max peak (5512 samples): 0x000027c9 ####### 31%
Max peak (5512 samples): 0x00001ab4 ##### 20%
Max peak (5512 samples): 0x00001459 #### 15%
Max peak (5512 samples): 0x00000ab9 ## 8%
Max peak (5512 samples): 0x000004ac # 3%
Max peak (5512 samples): 0x000003a1 # 2%
Max peak (5512 samples): 0x0000019d # 1%
Max peak (5512 samples): 0x000000e1 # 0%
Max peak (5512 samples): 0x000000ab # 0%
Max peak (5512 samples): 0x00000054 # 0%
Max peak (5512 samples): 0x0000001c # 0%
Max peak (5512 samples): 0x00000006 # 0%
hat's itnteresting in that when I feed aplay a tone, only happens in
this computer, the volume begins low and increasesover a second or two,
very noticable but not a problem I was bothered by.
aplay --dump-hw-params [wav file]
[bobg@Workstation-1 ~]$ aplay --dump-hw-params apps/audio/login.wav
Playing WAVE 'apps/audio/login.wav' : Signed 16 bit Little Endian,
Rate 22050 Hz, Stereo
HW Params of device "default":
And the output is being processed through the default device, which is
the link between alsa and pulseaudio.
Yes I keep seeing that, looks like the connection between aplay and
Polseaudio is open ...
Can you check in pavucontrol that the default device is actually your
device 0, the analog sound device? Or just do a
cat /etc/alsa/alsactl.conf
°
[bobg@Workstation-1 ~]$ cat /etc/alsa/alsactl.conf
#
# ALSA library configuration file for alsactl tool
# (/usr/share/alsa tree is not necessary for alsactl)
#
ctl.hw {
@args [ CARD ]
@args.CARD {
type string
default "0"
}
type hw
card $CARD
Everything says sound should be playing.
If you do
alsamixer -c0
are Master and Front showing 00? Is the volume in the bar above 80%?
The essential ones are OO and up to the red, "L{NE" was muted I set to
MM and turned the level up, that does not restore the sound though.
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
FEDORA-32/64bit LINUX XFCE Fastmail POP3
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
