Hi;
I bought this laptop over Christmas:
ASUS VivoBook Pro N705FD Notebook, 17.3" FHD Display, Intel Core
i7-8565U Upto 4.60GHz, 32GB RAM, 1TB SSD + 1TB HDD, NVIDIA GeForce GTX
1050, HDMI, Card Reader, Wi-Fi, Bluetooth, Windows 10 Pro
And I installed Fedora 31 on it.
The HDMI port drives a second monitor fine but the USB-C port will not.
I can plug an external drive into the USB-C port and it mounts it fine,
however I would like to drive an additional monitor with it.
When I plug an external monitor into the USB-C port I usually see
something like this via dmesg:
[100335.446405] usb 1-3: new high-speed USB device number 11 using xhci_hcd
[100335.919043] usb 1-3: New USB device found, idVendor=2109,
idProduct=0100, bcdDevice= 6.03
[100335.919046] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[100335.919048] usb 1-3: Product: USB-C dongle
[100335.919050] usb 1-3: Manufacturer: VIA Technologies Inc.
[100335.919051] usb 1-3: SerialNumber: 0000000000000001
[100340.101375] usb usb2-port3: Cannot enable. Maybe the USB cable is bad?
[100344.156355] usb usb2-port4: Cannot enable. Maybe the USB cable is bad?
Also here is the output of an lspci:
$ lspci
00:00.0 Host bridge: Intel Corporation Coffee Lake HOST and DRAM
Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620
(Whiskey Lake)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200
v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 0b)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 /
E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Cannon Point-LP
Thermal Controller (rev 30)
00:14.0 USB controller: Intel Corporation Cannon Point-LP USB 3.1 xHCI
Controller (rev 30)
00:14.2 RAM memory: Intel Corporation Cannon Point-LP Shared SRAM (rev 30)
00:14.3 Network controller: Intel Corporation Cannon Point-LP CNVi
[Wireless-AC] (rev 30)
00:15.0 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP
Serial IO I2C Controller #0 (rev 30)
00:15.1 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP
Serial IO I2C Controller #1 (rev 30)
00:16.0 Communication controller: Intel Corporation Cannon Point-LP MEI
Controller #1 (rev 30)
00:17.0 SATA controller: Intel Corporation Cannon Point-LP SATA
Controller [AHCI Mode] (rev 30)
00:1c.0 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root
Port #1 (rev f0)
00:1c.4 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root
Port #5 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root
Port #9 (rev f0)
00:1e.0 Communication controller: Intel Corporation Device 9da8 (rev 30)
00:1e.2 Serial bus controller [0c80]: Intel Corporation Device 9daa (rev 30)
00:1f.0 ISA bridge: Intel Corporation Cannon Point-LP LPC Controller
(rev 30)
00:1f.3 Audio device: Intel Corporation Cannon Point-LP High Definition
Audio Controller (rev 30)
00:1f.4 SMBus: Intel Corporation Cannon Point-LP SMBus Controller (rev 30)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP
SPI Controller (rev 30)
02:00.0 3D controller: NVIDIA Corporation GP107M [GeForce GTX 1050
Mobile] (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
Thoughts?
Thanks in advance...
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
