I just installed F27 (dual booting with Win 10 that came with it) on my
wife's new laptop and everything seemed fine until she told me the sound
wasn't working.
I checked the usual stuff, that it was configured properly in
gnome-control-center and it showed that the speakers were selected and
configured for "Analog Stereo Duplex". I even installed pavucontrol and
looked there and everything seems fine. Volume sliders are not at 0%
(actually close to 100%)
Pulseaudio is running...
Alsa seems happy:
# aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
HDA Intel PCH, ALC295 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC295 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC295 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC295 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC295 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC295 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC295 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC295 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
Looking at lspci everything looks good to me:
# lspci -vv -s 00:1f.3
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
Subsystem: Hewlett-Packard Company Device 83f8
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 134
Region 0: Memory at b1328000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at b1300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee003f8 Data: 0000
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
It looks like there's plenty of kernel modules loaded:
# lsmod | grep ^snd_hda
snd_hda_codec_hdmi 49152 1
snd_hda_codec_realtek 94208 1
snd_hda_ext_core 24576 1 snd_soc_skl
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_intel 40960 7
snd_hda_codec 126976 4
snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core 81920 7
snd_hda_intel,snd_hda_codec,snd_hda_ext_core,snd_soc_skl,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
Searching google there seems to be similar issues but most of them were
2016 or earlier posts and frequently the lack of the right kernel module
was part of the problem or alsa update.
I even tried installing the oldest kernel F26 provided (4.11?) and no dice.
Anyone else having this problem before I put in a bugzilla ticket? At this
point I'm not sure which component to assign it to.
Thanks,
Richard
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
