On 23/01/2017 00:43, poma wrote:
On 21.01.2017 21:00, poma wrote:
On 17.01.2017 22:12, Stephen Morris wrote:
[...]
The lsusb output for that device is also below.
Bus 010 Device 002: ID 2001:331a D-Link Corp.
[...]
D-Link DWA-192 - Realtek RTL8814AU WiFi USB 3.0
https://wikidevi.com/wiki/D-Link_DWA-192
http://support.dlink.com/ProductInfo.aspx?m=DWA-192
ftp://files.dlink.com.au/products/DWA-192
https://openitforum.pl/index/recenzje/karty/d-link-dwa-192-r225
https://wikidevi.com/wiki/Edimax_EW-7833UAC
http://www.edimax.com/edimax/download/download/data/edimax/global/download/for_home/wireless_adapters/wireless_adapters_ac1750_dual-band/ew-7833uac
http://www.edimax.com/edimax/mw/cufiles/files/download/Driver_Utility/EW-7833UAC_linux_4.3.21_kernel_3.16-4.4.zip
https://github.com/pld-linux/rtl8812au
https://github.com/diederikdehaas/rtl8812AU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$ unzip EW-7833UAC_linux_4.3.21_kernel_3.16-4.4.zip
$ cd
EW7833UAC_linux_4.3.21_kernel_3.16-4.4/EW7833UAC_linux_v4.3.21_17997.20160531/
$ curl -s
https://raw.githubusercontent.com/pld-linux/rtl8812au/master/disable-debug.patch
| patch -p1
$ curl -s https://github.com/diederikdehaas/rtl8812AU/commit/e6d6beb.patch |
patch -p1
$ curl -s
https://raw.githubusercontent.com/pld-linux/rtl8812au/master/linux-4.7.patch |
patch -p1
$ curl -s
https://raw.githubusercontent.com/pld-linux/rtl8812au/master/linux-4.8.patch |
patch -p1
$ make -j3
$ su
# cp 8814au.ko /lib/modules/$(uname -r)/updates/
# depmod
# modinfo 8814au | grep 2001
# modprobe -v 8814au
# dmesg:
...
RTL871X: module init start
RTL871X: rtl8814au v4.3.21_17997.20160531
RTL871X: build time: Jan 21 2017 20:04:38
usbcore: registered new interface driver rtl8814au
RTL871X: module init ret=0
...
# modprobe -rv 8814au
# dmesg:
...
RTL871X: module exit start
usbcore: deregistering interface driver rtl8814au
RTL871X: module exit success
...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Wifi ball works now?
HW add.
https://wikidevi.com/wiki/ASUS_USB-AC68
https://www.asus.com/Networking/USB-AC68/HelpDesk_Download
https://wikidevi.com/wiki/TP-LINK_Archer_T9UH
http://www.tp-link.com/en/download/Archer-T9UH.html
https://wikidevi.com/wiki/TRENDnet_TEW-809UB
https://www.trendnet.com/support/supportdetail.asp?prod=100_TEW-809UB
SW add.
https://github.com/abperiasamy/rtl8812AU_8821AU_linux
https://github.com/austinmarton/rtl8812au_linux
OR
according to "rtl8814au? #10"
https://github.com/diederikdehaas/rtl8812AU/issues/10
$ git clone -b driver-4.3.21 https://github.com/uminokoe/rtl8812AU.git
RTL8814AU-uminokoe
$ cd RTL8814AU-uminokoe/
$ git revert -n 9260f77 8d33100
// "Disabled debugging code."
$ curl -s https://github.com/diederikdehaas/rtl8812AU/commit/3e80ebc.patch |
patch -p1
// Enables CONFIG_MP_VHT_HW_TX_MODE
$ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/n/y/' Makefile
$ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/#//' Makefile
OR
$ git clone https://github.com/diederikdehaas/rtl8814AU.git
RTL8814AU-diederikdehaas
$ cd RTL8814AU-diederikdehaas/
// Adds missing Vendor/Product ID
$ sed -i '/0xA834/ a\\t{USB_DEVICE(0x7392, 0xA833), .driver_info = RTL8814A},
/* Edimax - Edimax */' os_dep/linux/usb_intf.c
// "Added VHT capabilities."
$ curl -s https://github.com/uminokoe/rtl8812AU/commit/5f75242.patch | patch -p1
// Enables CONFIG_MP_VHT_HW_TX_MODE
$ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/n/y/' Makefile
$ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/#//' Makefile
$ make -j3
$ su
# cp 8814au.ko /lib/modules/$(uname -r)/updates/
# depmod
# modinfo 8814au
# modprobe -v 8814au
# dmesg:
...
RTL871X: module init start
RTL871X: rtl8814au v4.3.21_17997.20160531
usbcore: registered new interface driver rtl8814au
RTL871X: module init ret=0
...
# modprobe -rv 8814au
# dmesg:
...
RTL871X: module exit start
usbcore: deregistering interface driver rtl8814au
RTL871X: module exit success
...
Hello Diederik,
it seems there are only two Linux RTL8814AU users, so far.
Morris, when you catch some time, would you mind to run a couple iperf tests
with DWA-192,
to see real network throughput results.
I can't run any at the moment because Fedora is refusing to actually use
the device at all.
I have also just upgraded to F25 and nothing has changed.
The last time I used this device was on 08/10/2016 and it was using the
ATH9K driver. The main reason I upgraded to this USB device was that I
upgraded my router to a faster version, and I found that unlike the
DWA182 I didn't have to compile my own driver, the kernel had inbuilt
support for the DWA192.
It is possible that I have managed to Blacklist the device in some way,
not by the conventional Blacklist.conf, and I have forgotten how so I
can't find where I've done it to reverse it.
Also, having never done it before, I also don't know how to run iperf tests.
regards,
Steve
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
