It appears to be something with the docking station the kernel doesn't
like, I remove the laptop from the docking station and the gui starts
right up.
When not in the docking station and I run lspci -vnn it provides the
following
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core
Processor Integrated Graphics Controller [8086:0416] (rev 06) (prog-if
00 [VGA controller])
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at f3000000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=512M]
I/O ports at 4000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
AND
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208M
[GeForce GT 730M] [10de:1290] (rev a1) (prog-if 00 [VGA controller])
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at f2000000 (32-bit, non-prefetchable) [disabled] [size=16M]
Memory at e0000000 (64-bit, prefetchable) [disabled] [size=256M]
Memory at f0000000 (64-bit, prefetchable) [disabled] [size=32M]
I/O ports at 3000 [disabled] [size=128]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel modules: nouveau
after the machine is up and can put the machine in the docking station
and both screens come on normally.
Suggestions as to what to look for?
Thanks,
Jeff
On 12/30/2016 02:48 PM, Jeffrey Ross wrote:
I'm running Fedora 24 kernel 4.7.9-200 (x86_64). the system is on a
Lenovo T440P. the machine boots and is accessable from the network but
the system itself never presents a login prompt after starting a blank
gray screen.
Below are some the information that I think is useful, I'm not sure where
to go from here. I was never successful with any of the 4.8.x kernels
which is why I set acpi=off in grub, this allowed the 4.8 kernels to boot
but they wouldn't start the gui either. I had just tried 4.8.15-200 with
the same result so I removed it with the following command " sudo dnf
remove kernel-core-4.8.15 kernel-modules-4.8.15 kernel-4.8.15
kernel-core-4.8.15 kernel-modules-4.8.15 kernel-4.8.15" to go back to
4.7.9, now I no longer get a login screen with 4.7.9.
I am using the Lenovo "Ultradock" docking station (40A20170WW) with 2
external monitors connected via Displayport video interfaces.
I'm looking for any help to get the display working again plus I'd like to
get the 4.8 kernels working and upgrade to Fedora 25.
Thanks in advance,
Jeff
รข vdsmd.service - Virtual Desktop Server Manager
Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor
preset: disabled)
Active: inactive (dead) (Result: exit-code) since Fri 2016-12-30
14:26:07 EST; 1min 8s ago
Process: 1952 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh
--pre-start (code=exited, status=1/FAILURE)
Dec 30 14:26:07 laptop systemd[1]: vdsmd.service: Unit entered failed state.
Dec 30 14:26:07 laptop systemd[1]: vdsmd.service: Failed with result
'exit-code'.
Dec 30 14:26:07 laptop systemd[1]: vdsmd.service: Service hold-off time
over, scheduling restart.
Dec 30 14:26:07 laptop systemd[1]: Stopped Virtual Desktop Server Manager.
Dec 30 14:26:07 laptop systemd[1]: vdsmd.service: Start request repeated
too quickly.
Dec 30 14:26:07 laptop systemd[1]: Failed to start Virtual Desktop Server
Manager.
$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor PCI Express x16 Controller (rev 06)
00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor PCI Express x8 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core
Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset
Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series
Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 8 Series/C220 Series Chipset
Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM
(rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High
Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family
PCI Express Root Port #1 (rev d4)
00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family
PCI Express Root Port #2 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM87 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset
Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus
Controller (rev 04)
02:00.0 VGA compatible controller: NVIDIA Corporation GK208M [GeForce GT
730M] (rev a1)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227
PCI Express Card Reader (rev 01)
04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 83)
grub kernel line -
" rd.lvm.lv=fedora_laptop/root
rd.luks.uuid=luks-533e7156-775d-48f6-abbd-90f14f31303d
rd.lvm.lv=fedora_laptop/s
wap rhgb quiet i915.enable_rc6=7 i915.enable_fbc=1 i915.lvds_downclock=1
i915.semaphores=1 acpi=off"
Xorg.0.log (last 40 lines or so)
[ 118.031] (II) intel(0): EDID vendor "AUO", prod id 9022
[ 118.031] (II) intel(0): Printing DDC gathered Modelines:
[ 118.031] (II) intel(0): Modeline "1600x900"x0.0 112.60 1600 1664
1706 1954 900 903 906 960 -hsync -vsync (57.6 kHz eP)
[ 119.431] (II) intel(0): switch to mode1920x1200@60.0 on DP2-1 using
pipe 0, position (1920, 0), rotation normal, reflection none
[ 119.431] (II) intel(0): switch to mode1920x1200@60.0 on DP2-2 using
pipe 1, position (0, 0), rotation normal, reflection none
[1009690.260] (**) Option "fd" "17"
[1009690.260] (**) Option "fd" "20"
[1009690.260] (**) Option "fd" "21"
[1009690.260] (**) Option "fd" "22"
[1009690.260] (**) Option "fd" "23"
[1009690.260] (**) Option "fd" "24"
[1009690.260] (**) Option "fd" "25"
[1009690.260] (**) Option "fd" "26"
[1009690.260] (**) Option "fd" "27"
[1009690.260] (**) Option "fd" "28"
[1009690.260] (**) Option "fd" "29"
[1009690.260] (**) Option "fd" "30"
[1009690.260] (**) Option "fd" "25"
[1009690.261] (II) UnloadModule: "libinput"
[1009690.261] (II) systemd-logind: not releasing fd for 13:70, still in use
[1009690.261] (II) UnloadModule: "libinput"
[1009690.261] (II) systemd-logind: releasing fd for 13:75
[1009690.459] (II) UnloadModule: "libinput"
[1009690.459] (II) systemd-logind: releasing fd for 13:71
[1009690.550] (II) UnloadModule: "libinput"
[1009690.550] (II) systemd-logind: releasing fd for 13:68
[1009690.573] (II) UnloadModule: "libinput"
[1009690.573] (II) systemd-logind: releasing fd for 13:67
[1009690.593] (II) UnloadModule: "libinput"
[1009690.593] (II) systemd-logind: releasing fd for 13:74
[1009690.611] (II) UnloadModule: "libinput"
[1009690.611] (II) systemd-logind: releasing fd for 13:70
[1009690.632] (II) UnloadModule: "libinput"
[1009690.632] (II) systemd-logind: releasing fd for 13:69
[1009690.660] (II) UnloadModule: "libinput"
[1009690.660] (II) systemd-logind: releasing fd for 13:83
[1009690.687] (II) UnloadModule: "libinput"
[1009690.687] (II) systemd-logind: releasing fd for 13:65
[1009690.705] (II) UnloadModule: "libinput"
[1009690.705] (II) systemd-logind: releasing fd for 13:73
[1009690.714] (II) UnloadModule: "libinput"
[1009690.714] (II) systemd-logind: releasing fd for 13:72
[1009690.726] (II) UnloadModule: "libinput"
[1009690.726] (II) systemd-logind: releasing fd for 13:66
[1009690.744] (II) NOUVEAU(G0): NVLeaveVT is called.
[1009690.825] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[1009691.303] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[1009691.303] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[1009691.706] (II) Server terminated successfully (0). Closing log file.
_______________________________________________
users mailing list --users@lists.fedoraproject.org
To unsubscribe send an email tousers-le...@lists.fedoraproject.org
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
