I am an Ham and I would to use Grig connected to my receiver (Icom
821H).When I start Grig I get:
grig -m 334 -r /dev/ttyUSB0
2016/04/05 17:22:07;;GRIG;;4;;grig_debug_init: Debug handler initialised.
2016/04/05 17:22:07;;GRIG;;4;;Checking GRIG configuration.
2016/04/05 17:22:07;;GRIG;;4;;..Configuration directory: OK
2016/04/05 17:22:07;;GRIG;;4;;..Radio config files:
2016/04/05 17:22:07;;GRIG;;5;;rig_daemon_start entered
2016/04/05 17:22:07;;GRIG;;5;;rig_daemon_start: Initializing rig (id=334)
2016/04/05 17:22:07;;HAMLIB;;4;;rig:rig_init called
2016/04/05 17:22:07;;HAMLIB;;4;;icom: _init called
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (355)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (309)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (310)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (311)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (313)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (314)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (315)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (319)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (320)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (321)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (322)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (367)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (323)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (346)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (324)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (328)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (330)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (326)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (327)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (347)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (357)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (363)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (329)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (362)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (345)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (356)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (360)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (370)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (361)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (331)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (312)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (316)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (332)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (334)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (344)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (368)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (335)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (369)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (336)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (358)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (337)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (338)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (339)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (340)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (341)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (342)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (343)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (366)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (303)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (304)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (306)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (307)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (302)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (352)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (353)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (351)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (364)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (365)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (354)
2016/04/05 17:22:07;;HAMLIB;;4;;rig_register (371)
2016/04/05 17:22:07;;HAMLIB;;4;;rig:rig_open called
2016/04/05 17:22:07;;GRIG;;5;;rig_daemon_start: Init successfull, executing
post-init
2016/04/05 17:22:07;;HAMLIB;;5;;write_block(): TX 6 bytes
2016/04/05 17:22:07;;HAMLIB;;5;;0000 fe fe 4c e0 04
fd ..L...
2016/04/05 17:22:07;;HAMLIB;;5;;read_string(): RX 6 characters
2016/04/05 17:22:07;;HAMLIB;;5;;0000 fe fe 4c e0 04
fd ..L...
2016/04/05 17:22:07;;HAMLIB;;5;;read_string(): RX 8 characters
2016/04/05 17:22:07;;HAMLIB;;5;;0000 fe fe e0 4c 04 05 01
fd ...L....
2016/04/05 17:22:07;;HAMLIB;;5;;write_block(): TX 7 bytes
2016/04/05 17:22:07;;HAMLIB;;5;;0000 fe fe 4c e0 1a 03
fd ..L....
2016/04/05 17:22:07;;HAMLIB;;5;;read_string(): RX 7 characters
2016/04/05 17:22:07;;HAMLIB;;5;;0000 fe fe 4c e0 1a 03
fd ..L....
2016/04/05 17:22:07;;HAMLIB;;5;;read_string(): RX 6 characters
2016/04/05 17:22:07;;HAMLIB;;5;;0000 fe fe e0 4c fa
fd ...L..
2016/04/05 17:22:07;;GRIG;;1;;rig_daemon_check_mode: Can not find frequency
range for this mode (32)! Bug in backend?
2016/04/05 17:22:07;;GRIG;;5;;rig_daemon_post_init: GET bits:
0000000000000000
2016/04/05 17:22:07;;GRIG;;5;;rig_daemon_post_init: SET bits:
0000000000000XXX
2016/04/05 17:22:07;;GRIG;;5;;rig_daemon_start: Starting rig daemon
2016/04/05 17:22:07;;GRIG;;4;;rig_daemon_start: Daemon thread started
2016/04/05 17:22:07;;GRIG;;4;;Initialising key press handler
the graphic interface starts but it doesn't work.
If I use hamlib rigctl -vvvvv -r /dev/ttyUSB0 -m 334 -L
rigctl, Hamlib 3.0.1
Report bugs to <hamlib-develo...@lists.sourceforge.net>
rig:rig_init called
icom: _init called
rig_register (355)
rig_register (309)
rig_register (310)
rig_register (311)
rig_register (313)
rig_register (314)
rig_register (315)
rig_register (319)
rig_register (320)
rig_register (321)
rig_register (322)
rig_register (367)
rig_register (323)
rig_register (346)
rig_register (324)
rig_register (328)
rig_register (330)
rig_register (326)
rig_register (327)
rig_register (347)
rig_register (357)
rig_register (363)
rig_register (329)
rig_register (362)
rig_register (345)
rig_register (356)
rig_register (360)
rig_register (370)
rig_register (361)
rig_register (331)
rig_register (312)
rig_register (316)
rig_register (332)
rig_register (334)
rig_register (344)
rig_register (368)
rig_register (335)
rig_register (369)
rig_register (336)
rig_register (358)
rig_register (337)
rig_register (338)
rig_register (339)
rig_register (340)
rig_register (341)
rig_register (342)
rig_register (343)
rig_register (366)
rig_register (303)
rig_register (304)
rig_register (306)
rig_register (307)
rig_register (302)
rig_register (352)
rig_register (353)
rig_register (351)
rig_register (364)
rig_register (365)
rig_register (354)
rig_register (371)
rig_pathname: "Path name to the device file of the rig"
Default: /dev/rig, Value: /dev/ttyUSB0
String.
write_delay: "Delay in ms between each byte sent out"
Default: 0, Value: 0
Range: 0.0..1000.0, step 1.0
post_write_delay: "Delay in ms between each command sent out"
Default: 0, Value: 0
Range: 0.0..1000.0, step 1.0
timeout: "Timeout in ms"
Default: 0, Value: 1000
Range: 0.0..10000.0, step 1.0
retry: "Max number of retry"
Default: 0, Value: 3
Range: 0.0..10.0, step 1.0
itu_region: "ITU region this rig has been manufactured for (freq. band
plan)"
Default: 0, Value: 2
Range: 1.0..3.0, step 1.0
vfo_comp: "VFO compensation in ppm"
Default: 0, Value: 0.000000
Range: 0.0..1000.0, step 0.0
poll_interval: "Polling interval in millisecond for transceive emulation"
Default: 500, Value: 500
Range: 0.0..1000000.0, step 1.0
ptt_type: "Push-To-Talk interface type override"
Default: RIG, Value:
Combo: RIG, DTR, RTS, Parallel, CM108, None
ptt_pathname: "Path name to the device file of the Push-To-Talk"
Default: /dev/rig, Value:
String.
ptt_bitnum: "Push-To-Talk GPIO bit number"
Default: 2, Value:
Range: 0.0..7.0, step 1.0
dcd_type: "Data Carrier Detect (or squelch) interface type override"
Default: RIG, Value:
Combo: RIG, DSR, CTS, CD, Parallel, CM108, None
dcd_pathname: "Path name to the device file of the Data Carrier Detect (or
squelch)"
Default: /dev/rig, Value:
String.
serial_speed: "Serial port baud rate"
Default: 0, Value: 19200
Range: 300.0..115200.0, step 1.0
data_bits: "Serial port data bits"
Default: 8, Value: 8
Range: 5.0..8.0, step 1.0
stop_bits: "Serial port stop bits"
Default: 1, Value: 1
Range: 0.0..3.0, step 1.0
serial_parity: "Serial port parity"
Default: None, Value: None
Combo: None, Odd, Even, Mark, Space
serial_handshake: "Serial port handshake"
Default: None, Value: None
Combo: None, XONXOFF, Hardware
rts_state: "Serial port set state of RTS signal for external powering"
Default: Unset, Value: Unset
Combo: Unset, ON, OFF
dtr_state: "Serial port set state of DTR signal for external powering"
Default: Unset, Value: Unset
Combo: Unset, ON, OFF
civaddr: "Transceiver's CI-V address"
Default: 0, Value: 76
Range: 0.0..255.0, step 1.0
mode731: "CI-V operating frequency data length, needed for IC731 and IC735"
Default: 0, Value: 1
Check button.
no_xchg: "Don't Use VFO XCHG to set other VFO mode and Frequency"
Default: 0, Value: 0
Check button.
rig:rig_open called
Opened rig model 334, 'IC-821H'
Backend version: 0.7, Status: Alpha
Rig command: f
write_block(): TX 6 bytes
0000 fe fe 4c e0 03 fd ..L...
read_string(): RX 6 characters
0000 fe fe 4c e0 03 fd ..L...
read_string(): RX 11 characters
0000 fe fe e0 4c 03 00 00 35 45 01 fd ...L...5E..
icom_get_freq: freq len (5) differs from expected
Frequency: 145350000
I can talk with my rig as f command gets the frequency.
What is wrong??
--
Antonio Montagnani
Skype : amontag52
Linux Fedora 23 (Workstation)
inviato da Gmail
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
http://lists.fedoraproject.org/admin/lists/users@lists.fedoraproject.org
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
