Hi Vinicio

It probably comes from a command in your init string not supported by your
modem.

Enable debug mode so you can have more info.

Regards,

Alvaro
|----------------------------------------------------------------------------------------|
 Stay safe / Cuídate/  Reste sécurisé
*7* Switch off as you go / Apaga lo que no usas /  Débranchez au fur et à
mesure.
 *q *Recycle always / Recicla siempre / Recyclez toujours
 P Print only if absolutely necessary / Imprime solo si es necesario /
Imprimez seulement si nécessaire


Le ven. 9 oct. 2020 à 19:11, Vinicio Cruz <vinicio.c...@gmail.com> a écrit :

> hello everyone, I just bought a sim from Claro and put it in to a working
> modem but I not connect, It gives an error “+CMS ERROR: 302”. I tried it in
> a cell phone and send/recive sms normally.
>
>
>
> Does any one knows of issues with new sims and old modems? Or maybe a
> special configuration in Kannel?, below is the log extract.
>
>
>
> Thanks for your help.
>
>
>
> 2020-10-09 17:25:51 [17752] [23] INFO: AT2[modem-5-telca]: opening device
>
> 2020-10-09 17:25:51 [17752] [23] INFO: AT2[modem-5-telca]: Logging in
>
> 2020-10-09 17:25:51 [17752] [23] INFO: AT2[modem-5-telca]: init device
>
> 2020-10-09 17:25:51 [17752] [23] INFO: AT2[modem-5-telca]: speed set to
> 57600
>
> 2020-10-09 17:25:58 [17752] [23] ERROR: AT2[modem-5-telca]: Wrong or no
> answer to ATZ, ignoring
>
> 2020-10-09 17:25:58 [17752] [23] ERROR: AT2[modem-5-telca]: Initialization
> of device failed. Attempt #0 on 1 max.
>
> 2020-10-09 17:25:58 [17752] [23] INFO: AT2[modem-5-telca]: Closing device
>
> 2020-10-09 17:25:58 [17752] [23] ERROR: AT2[modem-5-telca]: Couldn't
> connect (retrying in 10 seconds).
>
> 2020-10-09 17:26:08 [17752] [23] INFO: AT2[modem-5-telca]: opening device
>
> 2020-10-09 17:26:08 [17752] [23] INFO: AT2[modem-5-telca]: Logging in
>
> 2020-10-09 17:26:08 [17752] [23] INFO: AT2[modem-5-telca]: init device
>
> 2020-10-09 17:26:08 [17752] [23] INFO: AT2[modem-5-telca]: speed set to
> 57600
>
> 2020-10-09 17:26:12 [17752] [23] ERROR: AT2[modem-5-telca]: Generic error:
> ERROR
>
> 2020-10-09 17:26:13 [17752] [23] ERROR: AT2[modem-5-telca]: +CMS ERROR:
> +CMS ERROR: 302
>
> 2020-10-09 17:26:13 [17752] [23] ERROR: AT2[modem-5-telca]: +CMS ERROR:
> The operation to be done by the AT command is not allowed (302)
>
> 2020-10-09 17:26:13 [17752] [23] ERROR: AT2[modem-5-telca]: Initialization
> of device failed. Attempt #1 on 1 max.
>
> 2020-10-09 17:26:13 [17752] [23] INFO: AT2[modem-5-telca]: Closing device
>
> 2020-10-09 17:26:13 [17752] [23] ERROR: AT2[modem-5-telca]: Couldn't
> connect (retrying in 10 seconds).
>
>
>
> *Vinicio Cruz.*
>
>
>

Reply via email to