Yes, that is correct. After you configure your smsbox Send SMS via HTTP command
sendsms?username=kannel&password=kannel&to=xxxxxxxxxx&text=test_msg Respectfully, On Fri, Oct 19, 2018 at 7:17 PM Rafael Cerna <raf...@hacom-tech.com> wrote: > So the configuration for SMPP source_addr is set in the smsbox > configuration? > > > > 2018-10-18 17:22:01 [14779] [7] DEBUG: SMPP PDU 0xad402f00 dump: > > 2018-10-18 17:22:01 [14779] [7] DEBUG: type_name: submit_sm > > 2018-10-18 17:22:01 [14779] [7] DEBUG: command_id: 4 = 0x00000004 > > 2018-10-18 17:22:01 [14779] [7] DEBUG: command_status: 0 = 0x00000000 > > 2018-10-18 17:22:01 [14779] [7] DEBUG: sequence_number: 4770 = 0x000012a2 > > 2018-10-18 17:22:01 [14779] [7] DEBUG: service_type: NULL > > 2018-10-18 17:22:01 [14779] [7] DEBUG: source_addr_ton: 2 = 0x00000002 > > 2018-10-18 17:22:01 [14779] [7] DEBUG: source_addr_npi: 1 = 0x00000001 > > 2018-10-18 17:22:01 [14779] [7] DEBUG: source_addr: "1234" ß This is > the patameter that needs to be changed > > 2018-10-18 17:22:01 [14779] [7] DEBUG: dest_addr_ton: 1 = 0x00000001 > > 2018-10-18 17:22:01 [14779] [7] DEBUG: dest_addr_npi: 1 = 0x00000001 > > > > Thank you for the reply > > > > *De:* Cedar Jet [mailto:mecedar...@gmail.com] > *Enviado el:* viernes, 19 de octubre de 2018 11:07 a. m. > *Para:* raf...@hacom-tech.com > *CC:* users@kannel.org > *Asunto:* Re: Setting source address SMPP > > > > If you mean the source address by sender ID, that option will be handle > via the smsbox not from the SMSC by passing the sender Id and recipient > with the message > > > > Below is my SMSC setup, you can match with yours > > > > group = smsc > > smsc = smpp > > smsc-id = my-id > > allowed-smsc-id = my-id > > preferred-smsc-id = my-id > > interface-version = 34 > > host = xxx.xxx.xxx.xxx > > port = 6456 > > receive-port = 0 > > smsc-username = user > > smsc-password = pass > > system-type = VMA > > source-addr-ton = 5 > > source-addr-npi = 1 > > dest-addr-ton = 0 > > dest-addr-npi = 0 > > keepalive = 600 > > reconnect-delay = 3 > > enquire-link-interval = 30 > > esm-class = 0 > > log-level = 0 > > log-file = /var/log/kannel/smsc.log > > > > On Fri, Oct 19, 2018 at 6:59 PM Rafael Cerna <raf...@hacom-tech.com> > wrote: > > Hello, > > > > I am trying to change the source address to 672 for SMPP connection to > SMS, however the message is being set with source address 1234 which I have > not configured. How would I change the address? According to documentation > there is an option for my-number but it is not being changed. This is my > configuration > > > > group = smsc > > smsc = smpp > > smsc-id = SMSC1 > > host = x.x.x.x > > port = 21000 > > smsc-username = xxxxxx > > smsc-password = xxxxxx > > system-type = "WAP" > > address-range = "" > > my-number = 672 > > source-addr-ton = 4 > > source-addr-npi = 9 > > source-addr-autodetect = no > > > > Thanks for the reply in advance > >
