heheh I'm following since 3 days :) On Mon, Oct 15, 2018 at 11:33 AM Willy Mularto <sangpr...@gmail.com> wrote:
> Follow the error message to install required package. Thanks. > > > > So Far Express VPN still the fastest > > https://www.expressrefer.com/refer-friend?referrer_id=15939000&utm_campaign=referrals&utm_medium=copy_link&utm_source=referral_dashboard > > > On Mon, Oct 15, 2018 at 3:31 PM Cedar Jet <mecedar...@gmail.com> wrote: > >> Ok, I will do that. but how? >> >> If via repository it wont compile with mysql and if from the source we >> have a problem with the compilation and installation on Ubuntu 18.4 LTS >> >> Regards >> >> On Mon, Oct 15, 2018 at 11:23 AM Willy Mularto <sangpr...@gmail.com> >> wrote: >> >>> I prefer you to use source based installation rather than distro >>> package. Thanks. >>> >>> >>> So Far Express VPN still the fastest >>> >>> https://www.expressrefer.com/refer-friend?referrer_id=15939000&utm_campaign=referrals&utm_medium=copy_link&utm_source=referral_dashboard >>> >>> >>> On Mon, Oct 15, 2018 at 11:56 AM Cedar Jet <mecedar...@gmail.com> wrote: >>> >>>> Look, After investigation, I noticed that the kannel install is working >>>> well via source, but the sqlbox was installed via repository kannel-sqlbox, >>>> so for this reason I couldn't compile it. >>>> >>>> I ran apt-get remove kannel-sqlbox >>>> >>>> I went to kannel source code folder then addons/sqlbox and >>>> ran ./bootstrap I got the below >>>> >>>> + set -e >>>> + amvers=no >>>> + automake-1.11 --version >>>> + automake-1.10 --version >>>> + automake-1.9 --version >>>> + automake-1.8 --version >>>> + automake-1.7 --version >>>> + automake-1.6 --version >>>> + automake-1.5 --version >>>> + automake --version >>>> + automake+ sed -e 1s/[^0-9]*// -e q >>>> --version >>>> + amvers=1.15.1 >>>> + expr 1.15.1 < 1.5 >>>> + amvers=no >>>> + test no = no >>>> + set +x >>>> ./bootstrap: you need automake version 1.5 or later >>>> >>>> I uninstalled the automake then downloaded >>>> ftp://ftp.gnu.org/gnu/automake/automake-1.15.1.tar.gz then >>>> >>>> ./configure >>>> ./make && ./make install >>>> >>>> now getting >>>> >>>> + set -e >>>> + amvers=no >>>> + automake-1.15 --version >>>> + amvers=-1.15 >>>> + test -1.15 = no >>>> + libtoolize=no >>>> + glibtoolize --version >>>> + libtoolize --version >>>> + libtoolize=libtoolize >>>> + test libtoolize = no >>>> + set +x >>>> + test ! -d autotools >>>> + libtoolize --copy --force >>>> libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'autotools'. >>>> libtoolize: copying file 'autotools/ltmain.sh' >>>> libtoolize: You should add the contents of the following files to >>>> 'aclocal.m4': >>>> libtoolize: '/usr/share/aclocal/libtool.m4' >>>> libtoolize: '/usr/share/aclocal/ltoptions.m4' >>>> libtoolize: '/usr/share/aclocal/ltsugar.m4' >>>> libtoolize: '/usr/share/aclocal/ltversion.m4' >>>> libtoolize: '/usr/share/aclocal/lt~obsolete.m4' >>>> libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to >>>> configure.ac, >>>> libtoolize: and rerunning libtoolize and aclocal. >>>> libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. >>>> + test -f ltmain.sh >>>> + aclocal-1.15 -I autotools >>>> + autoconf >>>> configure.ac:99: error: possibly undefined macro: AC_PROG_LIBTOOL >>>> If this token and others are legitimate, please use >>>> m4_pattern_allow. >>>> See the Autoconf documentation. >>>> >>>> so I'm not able to run the bootstrap to re-compiling with mysql >>>> >>>> Regards >>>> >>>> On Mon, Oct 15, 2018 at 7:48 AM Willy Mularto <sangpr...@gmail.com> >>>> wrote: >>>> >>>>> What version do you use? Also how do you initiate the SQLBox? Thanks. >>>>> >>>>> >>>>> So Far Express VPN still the fastest >>>>> >>>>> https://www.expressrefer.com/refer-friend?referrer_id=15939000&utm_campaign=referrals&utm_medium=copy_link&utm_source=referral_dashboard >>>>> >>>>> >>>>> On Mon, Oct 15, 2018 at 10:38 AM Cedar Jet <mecedar...@gmail.com> >>>>> wrote: >>>>> >>>>>> I tried what Willy Suggest with the same result. I saw some posts >>>>>> saying that we should compile sqlbox with mysql, for that reason I'm >>>>>> running now on server that containing apache2, phpmyadmin php5.6 and >>>>>> mysql >>>>>> on Ubuntu 16.4 only. I had followed the below link >>>>>> >>>>>> >>>>>> https://stackoverflow.com/questions/45980691/sqlbox-looking-for-mysql-instead-of-mssql/46727135#46727135 >>>>>> >>>>>> Still getting the below >>>>>> >>>>>> 2018-10-14 23:30:45 [2701] [0] INFO: Starting to log to file >>>>>> /var/log/kannel/sqlbox.log level 0 >>>>>> 2018-10-14 23:30:45 [2701] [0] INFO: Added logfile >>>>>> `/var/log/kannel/sqlbox.log' with level `0'. >>>>>> 2018-10-14 23:30:45 [2701] [0] PANIC: SQLBOX: MSSql: connection >>>>>> settings for id 'sqlbox-db' are not specified! >>>>>> 2018-10-14 23:30:45 [2701] [0] PANIC: sqlbox(gw_backtrace+0xe0) >>>>>> [0x5575862ad990] >>>>>> 2018-10-14 23:30:45 [2701] [0] PANIC: sqlbox(gw_panic+0x167) >>>>>> [0x5575862adb07] >>>>>> 2018-10-14 23:30:45 [2701] [0] PANIC: sqlbox(sqlbox_init_mssql+0x139) >>>>>> [0x557586299729] >>>>>> 2018-10-14 23:30:45 [2701] [0] PANIC: sqlbox(sqlbox_init_sql+0x9) >>>>>> [0x55758629ede9] >>>>>> 2018-10-14 23:30:45 [2701] [0] PANIC: sqlbox(main+0x361) >>>>>> [0x557586297791] >>>>>> 2018-10-14 23:30:45 [2701] [0] PANIC: >>>>>> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe7) [0x7f5dd3777b97] >>>>>> 2018-10-14 23:30:45 [2701] [0] PANIC: sqlbox(_start+0x2a) >>>>>> [0x557586297a2a] >>>>>> >>>>>> It could bebecasue it initiate the mssql before the mysql database as >>>>>> the below lines >>>>>> >>>>>> 2018-10-14 23:30:45 [2701] [0] PANIC: sqlbox(sqlbox_init_mssql+0x139) >>>>>> [0x557586299729] >>>>>> 2018-10-14 23:30:45 [2701] [0] PANIC: sqlbox(sqlbox_init_sql+0x9) >>>>>> [0x55758629ede9] >>>>>> >>>>>> Any Idea? >>>>>> >>>>>> On Mon, Oct 15, 2018 at 5:01 AM Willy Mularto <sangpr...@gmail.com> >>>>>> wrote: >>>>>> >>>>>>> Try to put the database connection before the sqlbox group. Thanks >>>>>>> >>>>>>> Pada tanggal Sen, 15 Okt 2018 02.10, Cedar Jet <mecedar...@gmail.com> >>>>>>> menulis: >>>>>>> >>>>>>>> Sure, and you can find the configuration below >>>>>>>> >>>>>>>> group = sqlbox >>>>>>>> id = sqlbox-db >>>>>>>> smsbox-id = sqlbox >>>>>>>> #global-sender = "" >>>>>>>> bearerbox-host = localhost >>>>>>>> bearerbox-port = 18001 >>>>>>>> smsbox-port = 18005 >>>>>>>> smsbox-port-ssl = false >>>>>>>> sql-log-table = sent_sms >>>>>>>> sql-insert-table = send_sms >>>>>>>> log-level = 0 >>>>>>>> log-file = "/var/log/kannel/sqlbox.log" >>>>>>>> >>>>>>>> # database connection >>>>>>>> group = mysql-connection >>>>>>>> id = sqlbox-db >>>>>>>> host = localhost >>>>>>>> username = root >>>>>>>> password = root >>>>>>>> database = kannel_db >>>>>>>> #max-connections = 25 >>>>>>>> >>>>>>>> On Sun, Oct 14, 2018 at 1:48 AM Willy Mularto <sangpr...@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Share your SQLBox configuration file. Thanks >>>>>>>>> >>>>>>>>> >>>>>>>>> So Far Express VPN still the fastest >>>>>>>>> >>>>>>>>> https://www.expressrefer.com/refer-friend?referrer_id=15939000&utm_campaign=referrals&utm_medium=copy_link&utm_source=referral_dashboard >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sun, Oct 14, 2018 at 12:35 AM Cedar Jet <mecedar...@gmail.com> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Hello, >>>>>>>>>> >>>>>>>>>> I'm always getting the panic SQLBOX: MSSql: connection settings >>>>>>>>>> for id 'sqlbox-db' are not specified! as below >>>>>>>>>> >>>>>>>>>> root@smpp:~# sqlbox -v 0 /etc/kannel/sqlbox.conf >>>>>>>>>> 2018-10-13 12:47:37 [1819] [0] INFO: Debug_lvl = 0, log_file = >>>>>>>>>> <none>, log_lvl = 0 >>>>>>>>>> 2018-10-13 12:47:37 [1819] [0] DEBUG: Kannel sqlbox version >>>>>>>>>> `1.4.4'. >>>>>>>>>> Compiler `7.2.0'. >>>>>>>>>> System Linux, release 4.15.0-36-generic, version #39-Ubuntu SMP >>>>>>>>>> Mon Sep 24 16:19:09 UTC 2018, machine x86_64. >>>>>>>>>> Libxml version 2.9.4. >>>>>>>>>> Using OpenSSL 1.0.2g 1 Mar 2016. >>>>>>>>>> Compiled with MySQL 5.7.20, using MySQL 5.7.23. >>>>>>>>>> Compiled with PostgreSQL 10.0. >>>>>>>>>> Using SQLite 3.20.1. >>>>>>>>>> Using hiredis API 0.13.3 >>>>>>>>>> Using native malloc. >>>>>>>>>> >>>>>>>>>> 2018-10-13 12:47:37 [1819] [0] INFO: Starting to log to file >>>>>>>>>> /var/log/kannel/sqlbox.log level 0 >>>>>>>>>> 2018-10-13 12:47:37 [1819] [0] INFO: Added logfile >>>>>>>>>> `/var/log/kannel/sqlbox.log' with level `0'. >>>>>>>>>> 2018-10-13 12:47:37 [1819] [0] PANIC: SQLBOX: MSSql: connection >>>>>>>>>> settings for id 'sqlbox-db' are not specified! >>>>>>>>>> 2018-10-13 12:47:37 [1819] [0] PANIC: sqlbox(gw_backtrace+0xe0) >>>>>>>>>> [0x560fc0415990] >>>>>>>>>> 2018-10-13 12:47:37 [1819] [0] PANIC: sqlbox(gw_panic+0x167) >>>>>>>>>> [0x560fc0415b07] >>>>>>>>>> 2018-10-13 12:47:37 [1819] [0] PANIC: >>>>>>>>>> sqlbox(sqlbox_init_mssql+0x139) [0x560fc0401729] >>>>>>>>>> 2018-10-13 12:47:37 [1819] [0] PANIC: sqlbox(sqlbox_init_sql+0x9) >>>>>>>>>> [0x560fc0406de9] >>>>>>>>>> 2018-10-13 12:47:37 [1819] [0] PANIC: sqlbox(main+0x361) >>>>>>>>>> [0x560fc03ff791] >>>>>>>>>> 2018-10-13 12:47:37 [1819] [0] PANIC: >>>>>>>>>> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe7) >>>>>>>>>> [0x7ff01014fb97] >>>>>>>>>> 2018-10-13 12:47:37 [1819] [0] PANIC: sqlbox(_start+0x2a) >>>>>>>>>> [0x560fc03ffa2a] >>>>>>>>>> root@smpp:~# 2018-10-13 12:47:43 [1716] [1] DEBUG: Timeout for >>>>>>>>>> fd:65 appears. >>>>>>>>>> 2018-10-13 12:47:43 [1716] [1] DEBUG: HTTP: Destroying HTTPClient >>>>>>>>>> area 0x7f9128000d30. >>>>>>>>>> 2018-10-13 12:47:43 [1716] [1] DEBUG: HTTP: Destroying HTTPClient >>>>>>>>>> for `77.30.145.30'. >>>>>>>>>> >>>>>>>>>>
