Thank you all. It worked with the DLR Storage in same database.
- Mahesh On Sat, Aug 4, 2018 at 12:56 PM, Денис Давыдов <dyna...@gmail.com> wrote: > Manesh, > > See msg-id-type in the User Guide. Also I suggest you to enable debug mode > to smsc group (log_level=0) to see how your provider work with a message ID > numbers. > > -- > Regards, > Denis > > пт, 3 авг. 2018 г. в 9:38, mahesh Lavanam <mah...@metamorphsystems.com>: > >> Hi, >> >> Please help me in resolving the DLR issue >> >> I have a SMS Port with 2 TX & 2 RX sessions enabled. >> >> I have configured these sessions in two kannel configurations with same >> smsc id >> >> *kannel1.conf - 1TX & 1RX(SMSbox1 & Bearerbox1) * >> >> #1st tx connection >> group = smsc >> smsc = smpp >> smsc-id = tran >> host = xxx.xxx.xxx.xx >> port = xxx >> smsc-username = xxxxx >> smsc-password = xxxxxx >> system-type = smpp >> connect-allow-ip = 127.0.0.1 >> source-addr-ton = 0 >> source-addr-npi = 1 >> dest-addr-ton = 1 >> dest-addr-npi = 1 >> >> >> #1st Rx Connection >> group = smsc >> smsc = smpp >> smsc-id = tran >> host = xxx.xxx.xxx.xx >> port = xxx >> smsc-username = xxxxx >> smsc-password = xxxxxx >> system-type = smpp >> connect-allow-ip = 127.0.0.1 >> source-addr-ton = 0 >> source-addr-npi = 1 >> dest-addr-ton = 1 >> dest-addr-npi = 1 >> >> kannel2.conf * - 1TX & 1RX(SMSbox2 & Bearerbox2) * >> >> #1st tx connection >> group = smsc >> smsc = smpp >> smsc-id = tran >> host = xxx.xxx.xxx.xx >> port = xxx >> smsc-username = xxxxx >> smsc-password = xxxxxx >> system-type = smpp >> connect-allow-ip = 127.0.0.1 >> source-addr-ton = 0 >> source-addr-npi = 1 >> dest-addr-ton = 1 >> dest-addr-npi = 1 >> >> >> #1st Rx Connection >> group = smsc >> smsc = smpp >> smsc-id = tran >> host = xxx.xxx.xxx.xx >> port = xxx >> smsc-username = xxxxx >> smsc-password = xxxxxx >> system-type = smpp >> connect-allow-ip = 127.0.0.1 >> source-addr-ton = 0 >> source-addr-npi = 1 >> dest-addr-ton = 1 >> dest-addr-npi = 1 >> >> >> In kannel2.log file, I see that kannel1's sms DLRs are receiving and >> seeing the error as below: >> >> DEBUG: DLR[internal]: Looking for DLR smsc=tran, ts=0160683811, >> dst=919134556661, type=1 >> WARNING: DLR[internal]: DLR from SMSC<tran> for DST<919134556661> not >> found. >> ERROR: SMPP[bsnl_tran]: got DLR but could not find message or was not >> interested in it id<0160683811> dst<919134556661>, type<1> >> >> Same error at kannel1.log file, when received the SMS DLRs of kannel2's >> messages >> >> Please help me to resolve the issue, to route the DLRs into its >> respective kannel's i.e., Kannel1's sent sms dlr into kannel1 & kannel2's >> sent sms dlr into kannel2. >> >> Thanks, >> Mahesh >> >>
