Hi
Add +CMEE=1 or 2 to modem init config to get more detailed info from modem.
Regards
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
Visitenos en www.perusms.com
On Thu, Jul 9, 2015 at 8:39 AM, Torsten Parschau <tors...@parschau.de>
wrote:
> Hello,
>
> with version 1.4.3 everything works great.
> With version 1.4.4 (even actual svn) we get get a generic error, after
> AT+CSMS=?^M.
>
> As you can see the modem responds (AT+CSMS=?) correctly, but the command
> AT+CNMI=3,2,0,1,1 should be after the complete response, not in the middle:
>
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: --> AT+CSMS=?^M
> 2015-07-09 15:20:36 [6081] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:20:36 [6081] [6] DEBUG: AT2[modem]: --> *AT+CNMI=3,2,0,1,1^M*
> 2015-07-09 15:20:36 [6081] [6] DEBUG: AT2[modem]: <-- +CSMS: (0,1)
> 2015-07-09 15:20:36 [6081] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:20:36 [6081] [6] INFO: AT2[modem]: AT SMSC successfully
> opened.
> 2015-07-09 15:20:36 [6081] [6] DEBUG: AT2[modem]: <-- ERROR
>
> Modem is a serial connected Siemens ct63 (compatible TC35)
>
> *Version 1.4.3 (works)*
> 2015-07-09 15:07:31 [5615] [6] INFO: AT2[modem]: opening device
> 2015-07-09 15:07:31 [5615] [6] DEBUG: AT2[modem]: device opened. Telnet
> mode = 0
> 2015-07-09 15:07:32 [5615] [6] DEBUG: AT2[modem]: device opened
> 2015-07-09 15:07:32 [5615] [6] INFO: AT2[modem]: Logging in
> 2015-07-09 15:07:32 [5615] [6] INFO: AT2[modem]: init device
> 2015-07-09 15:07:32 [5615] [6] INFO: AT2[modem]: speed set to 9600
> 2015-07-09 15:07:32 [5615] [6] DEBUG: AT2[modem]: --> ATZ^M
> 2015-07-09 15:07:32 [5615] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:07:32 [5615] [6] DEBUG: AT2[modem]: --> AT^M
> 2015-07-09 15:07:32 [5615] [6] DEBUG: AT2[modem]: <-- AT
> 2015-07-09 15:07:32 [5615] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:07:32 [5615] [6] DEBUG: AT2[modem]: --> AT&F^M
> 2015-07-09 15:07:32 [5615] [6] DEBUG: AT2[modem]: <-- AT&F
> 2015-07-09 15:07:32 [5615] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:07:32 [5615] [6] DEBUG: AT2[modem]: --> ATE0^M
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: <-- ATE0
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: --> AT\Q3^M
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: --> AT+CPIN?^M
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: <-- +CPIN: READY
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: --> AT+CMGF=0^M
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: --> AT+CSMS=?^M
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: <-- +CSMS: (0,1)
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:07:33 [5615] [6] INFO: AT2[modem]: Phase 2+ is supported
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: --> AT+CSMS=1^M
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: <-- +CSMS: 1,1,1
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: --> AT+CNMI=3,2,0,1,1^M
> 2015-07-09 15:07:33 [5615] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:07:33 [5615] [6] INFO: AT2[modem]: AT SMSC successfully
> opened.
> 2015-07-09 15:07:35 [5615] [6] DEBUG: AT2[modem]: --> AT+CSQ^M
>
>
> *Version 1.4.4 (error)*
> 2015-07-09 15:20:34 [6081] [6] INFO: AT2[modem]: opening device
> 2015-07-09 15:20:34 [6081] [6] DEBUG: AT2[modem]: device opened. Telnet
> mode = 0
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: device opened
> 2015-07-09 15:20:35 [6081] [6] INFO: AT2[modem]: Logging in
> 2015-07-09 15:20:35 [6081] [6] INFO: AT2[modem]: init device
> 2015-07-09 15:20:35 [6081] [6] INFO: AT2[modem]: speed set to 9600
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: --> ATZ^M
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: --> AT^M
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: <-- AT
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: --> AT&F^M
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: <-- AT&F
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: --> ATE0^M
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: <-- ATE0
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: --> AT\Q3^M
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: --> AT+CPIN?^M
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: <-- +CPIN: READY
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: --> AT+CMGF=0^M
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:20:35 [6081] [6] DEBUG: AT2[modem]: --> AT+CSMS=?^M
> 2015-07-09 15:20:36 [6081] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:20:36 [6081] [6] DEBUG: AT2[modem]: --> AT+CNMI=3,2,0,1,1^M
> 2015-07-09 15:20:36 [6081] [6] DEBUG: AT2[modem]: <-- +CSMS: (0,1)
> 2015-07-09 15:20:36 [6081] [6] DEBUG: AT2[modem]: <-- OK
> 2015-07-09 15:20:36 [6081] [6] INFO: AT2[modem]: AT SMSC successfully
> opened.
> 2015-07-09 15:20:36 [6081] [6] DEBUG: AT2[modem]: <-- ERROR
> 2015-07-09 15:20:36 [6081] [6] ERROR: AT2[modem]: Generic error: ERROR
> 2015-07-09 15:20:36 [6081] [6] DEBUG: AT2[modem]: --> AT+CSQ^M
>
> Does anybody know why this happens and how to fix it??
>
> best regards
> Torsten
>
>
>
