Hi
It is normal that USB modems appears more than once on the tty. You should
check which tty correspond to the AT command port. Those ports usually does
not change, unless you remove/reinsert the usb to the PC. This is a Linux
kernel issue, not kannels. There are some hacks on internet about how to
remediate this.
What I don't understand is what do you change with minicom?
About messages not being deleted, are you talking about incomming or
outgoing? Usually it only stores outgoing until confirmed by smsc that it
has received then is automatically deleted. In the case of incomming, it is
done "manually" You can try to set sim-buffering = true to have kannel
lokk for incomming and process them. even if you don't care about them you
need to freeup modem memory. Just have kannel process them and send them to
trash.
bearerbox being unable to communicate with the modem could be caused by
modem memory being full.
About alerts, kannel have not a way to check this. You can however do two
things:
- Use admin interface to monitor kannel queues and generate alarms parsing
that info.
- Parse kannel logs to look for AT errors.
Hope helps.
If need more help, please post modem logs.
Regards
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
Visitenos en www.perusms.com
On Thu, May 14, 2015 at 1:06 AM, Equipe Support <p...@onlynetworks.net> wrote:
> Hello,
>
> We use Kannel v1.4.3 installed on Ubuntu server 14.04.1 with a 3G Huawei
> E1522 USB key.
>
> We use Kannel only for shipments of SMS via HTTP. No reception.
>
> We find that for 2-3 days it works well, then the messages are stored in
> the queue and are not sent.
>
> *We have 2 types of errors:*
>
> *1: CMS Error: unknown error 500 = -> Sim storage maybe it full?*
>
> *2nd: bearerbox can't connect to the USB modem.*
>
> We also found that in Linux, our 3G Huawei key appears 2 times: ttyUSB1
> and ttyUSB2.
>
> The solution we found for now: stop Kannel services, change the modem in
> *minicom
> *with ttyUSB1 or ttyUSB2, modify kannel.conf (with ttyUSBxx modem) and
> restart bearebox and SMSBOX.
>
> Could you help us with this problem please? It is very important to us?
>
> Another thing: can we set the alerts (eg by email) when SMS messages are
> not sent and stored in the queue?
>
> Thank you find enclosed our Kannel configuration file and file logs.
>
> Waiting for your reply.
>
> Best regards.
>
>
> <http://www.onlynetworks.net>
>
>
