Hi
The error is self explanatory: Disable hardware handshake either in kannel
config or modem init string.
Check user guide to see how to in kannel.
Regards
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
Visitenos en www.perusms.com
On Fri, Nov 28, 2014 at 3:11 AM, Juned Khan <jkhan6...@gmail.com> wrote:
> Hi *@Shally*
>
> You are coorect seems problem with modem. its not initializing.
>
> 2014-11-28 13:35:00 [10142] [6] INFO: AT2[/dev/ttyACM0]: opening device
> 2014-11-28 13:35:00 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: device opened.
> Telnet mode = 0
> 2014-11-28 13:35:00 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> 2014-11-28 13:35:00 [10142] [6] INFO: AT2[/dev/ttyACM0]: Logging in
> 2014-11-28 13:35:01 [10142] [6] INFO: AT2[/dev/ttyACM0]: init device
> 2014-11-28 13:35:01 [10142] [6] INFO: AT2[/dev/ttyACM0]: speed set to 19200
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATZ
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2014-11-28 13:35:01 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M
> 2014-11-28 13:35:02 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR
> 2014-11-28 13:35:02 [10142] [6] ERROR: AT2[/dev/ttyACM0]: Generic error:
> ERROR
> 2014-11-28 13:35:02 [10142] [6] INFO: AT2[/dev/ttyACM0]: cannot enable
> hardware handshake
> 2014-11-28 13:35:02 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CPIN?^M
> 2014-11-28 13:35:02 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CPIN: READY
> 2014-11-28 13:35:02 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2014-11-28 13:35:02 [10142] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSCA="
> +919084051550"^M
> 2014-11-28 13:35:06 [10142] [6] ERROR: AT2[/dev/ttyACM0]: Initialization
> of device failed.
> 2014-11-28 13:35:06 [10142] [6] INFO: AT2[/dev/ttyACM0]: Closing device
> 2014-11-28 13:35:06 [10142] [6] ERROR: AT2[/dev/ttyACM0]: Couldn't connect
> (retrying in 10 seconds).
>
>
> *@Cornejo*
>
> Yeah I have tried wvdialconf
>
> root@inextrix:/home/juned# wvdialconf
> Editing `/etc/wvdial.conf'.
>
> Scanning your serial ports for a modem.
>
> ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
> ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
> ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
> ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
> ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
> ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
> Modem Port Scan<*1>: S2 S3 S4 S5 S6 S7 S8 S9
> Modem Port Scan<*1>: S10 S11 S12 S13 S14 S15 S16 S17
> Modem Port Scan<*1>: S18 S19 S20 S21 S22 S23 S24 S25
> Modem Port Scan<*1>: S26 S27 S28 S29 S30 S31
> ttyACM0<*1>: ATQ0 V1 E1 -- OK
> ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
> ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
> ttyACM0<*1>: Modem Identifier: ATI -- SAMSUNG GT-C3322
> ttyACM0<*1>: Speed 4800: AT -- OK
> ttyACM0<*1>: Speed 9600: AT -- OK
> ttyACM0<*1>: Speed 19200: AT -- OK
> ttyACM0<*1>: Speed 38400: AT -- OK
> ttyACM0<*1>: Speed 57600: AT -- OK
> ttyACM0<*1>: Speed 115200: AT -- OK
> ttyACM0<*1>: Speed 230400: AT -- OK
> ttyACM0<*1>: Speed 460800: AT -- OK
> ttyACM0<*1>: Max speed is 460800; that should be safe.
> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>
> Found an USB modem on /dev/ttyACM0.
> Modem configuration written to /etc/wvdial.conf.
>
>
>
>
>
>
> Regards
> Juned Khan / Network Engineer
> +91 9974740823/ juned.k...@inextrix.com
>
> iNextrix Technologies Pvt Ltd.
> www.inextrix.com <http://htmlsig.com/www.inextrix.com>
>
> [image: Facebook] <https://www.facebook.com/junedkhan23> [image: Twitter]
> <https://twitter.com/juned23> [image: Google Plus]
> <https://plus.google.com/+JunedKhan> [image: Linkedin]
> <http://htmlsig.com/in.linkedin.com/in/junedk>
>
> This e-mail message may contain confidential or legally privileged
> information and is intended only for the use of the intended recipient(s).
> Any unauthorized disclosure, dissemination, distribution, copying or the
> taking of any action in reliance on the information herein is prohibited.
> E-mails are not secure and cannot be guaranteed to be error free as they
> can be intercepted, amended, or contain viruses. Anyone who communicates
> with us by e-mail is deemed to have accepted these risks. Company Name is
> not responsible for errors or omissions in this message and denies any
> responsibility for any damage arising from the use of e-mail. Any opinion
> and other statement contained in this message and any attachment are solely
> those of the author and do not necessarily represent those of the company.
>
> On Thu, Nov 27, 2014 at 9:42 PM, Gabri Shally <gabri...@gmail.com> wrote:
>
>> @Juned Cornejo:
>> have you try wvdialconf?
>>
>> On Thu, Nov 27, 2014 at 10:47 PM, Alvaro Cornejo <
>> cornejo.alv...@gmail.com> wrote:
>>
>>> Hi
>>>
>>> You have something wrong with the modem setup. It shows CONECTING...
>>>
>>> post modem logs.
>>>
>>> Regards
>>>
>>> Alvaro
>>>
>>>
>>> |-----------------------------------------------------------------------------------------------------------------|
>>> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
>>> celular y Nextel
>>> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
>>> SMS y GPRS online
>>> Visitenos en www.perusms.com
>>>
>>> On Thu, Nov 27, 2014 at 6:24 AM, Juned Khan <jkhan6...@gmail.com> wrote:
>>>
>>>> Hi All,
>>>>
>>>> I am trying to send SMS using Kannel to my cellphone but messages are
>>>> not getting SMS to my phone. I am using this URL
>>>>
>>>>
>>>> http://localhost:13131/cgi-bin/sendsms?from=9173010133&username=playsms&password=playsms&text=hi%20budddy!&to=9638269138
>>>>
>>>> I am getting this while running above URL
>>>> 3: Queued for later delivery
>>>>
>>>> I am using my cell phone as a modem. its a dual sim device. below is my
>>>> configuration and logs.
>>>>
>>>> *Kannel.conf*
>>>>
>>>> # CORE
>>>> group = core
>>>> admin-port = 13000
>>>> admin-password = playsms
>>>> status-password = playsms
>>>> log-file = /var/log/kannel/kannel.log
>>>> log-level = 0
>>>> access-log = /var/log/kannel/access.log
>>>> smsbox-port = 13001
>>>> dlr-storage = internal
>>>> store-type = file
>>>> store-file = /var/log/kannel/kannel.store
>>>> #store-type = spool
>>>> #store-location = /var/spool/kannel/store
>>>> smsbox-max-pending = 100
>>>>
>>>> # SMSBOX
>>>> group = smsbox
>>>> bearerbox-host = localhost
>>>> bearerbox-port = 13001
>>>> sendsms-port = 13131
>>>> sendsms-chars = "0123456789+ "
>>>> log-file = /var/log/kannel/smsbox.log
>>>> log-level = 0
>>>> access-log = /var/log/kannel/access.log
>>>> mo-recode = true
>>>>
>>>>
>>>> group = smsc
>>>> smsc = at
>>>> modemtype = Samsung Electronics Co., Ltd C3322
>>>> device = /dev/ttyACM0
>>>> speed = 19200
>>>> log-file = /var/log/kannel/smsc-default.log
>>>> my-number = +919173010133
>>>> sms-center = +919084051550
>>>> validityperiod = 167
>>>> log-level = 0
>>>>
>>>>
>>>> group = modems
>>>> broken = true
>>>> id = Samsung Electronics Co., Ltd C3322
>>>> name = "Samsung Electronics Co., Ltd C3322"
>>>> detect-string = "C3322"
>>>> init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>>>> speed = 115200
>>>> enable-mms = true
>>>> message-storage = SM
>>>>
>>>>
>>>> # SENDSMS-USER
>>>> group = sendsms-user
>>>> default-smsc = at
>>>> username = playsms
>>>> password = playsms
>>>> #max-messages = 6
>>>> concatenation = true
>>>>
>>>> # SMS SERVICE 'default'
>>>> group = sms-service
>>>> keyword = default
>>>> omit-empty = true
>>>> max-messages = 0
>>>> get-url = "http://192.168.1.28/playsms/index.php";
>>>>
>>>>
>>>> *Kannel status in browser*
>>>>
>>>> http://localhost:13000/status?password=playsms
>>>>
>>>> Kannel bearerbox version `1.4.3'. Build `Nov 24 2011 09:54:00',
>>>> compiler `4.6.2'. System Linux, release 3.13.0-34-generic, version
>>>> #60-Ubuntu SMP Wed Aug 13 15:45:27 UTC 2014, machine x86_64. Hostname
>>>> inextrix, IP 127.0.1.1. Libxml version 2.7.8. Using OpenSSL 1.0.0e 6 Sep
>>>> 2011. Compiled with MySQL 5.5.17, using MySQL 5.5.38. Using SQLite 3.7.9.
>>>> Using native malloc.
>>>>
>>>> Status: running, uptime 0d 0h 2m 49s
>>>>
>>>> WDP: received 0 (0 queued), sent 0 (0 queued)
>>>>
>>>> SMS: received 0 (0 queued), sent 0 (3 queued), store size 3
>>>>
>>>> SMS: inbound (0.00,0.00,0.00) msg/sec, outbound (0.00,0.00,0.00) msg/sec
>>>>
>>>> DLR: 0 queued, using internal storage
>>>>
>>>> Box connections:
>>>> smsbox:(none), IP 127.0.0.1 (0 queued), (on-line 0d 0h 2m 3s)
>>>> SMSC connections:
>>>> *unknown* AT2[/dev/ttyACM0] (connecting, rcvd 0, sent 0, failed
>>>> 0, queued 0 msgs)
>>>>
>>>>
>>>>
>>>> *Bearerbox*
>>>>
>>>> 2014-11-27 16:28:16 [3834] [9] DEBUG: boxc_receiver: sms received
>>>> 2014-11-27 16:28:16 [3834] [9] DEBUG: send_msg: sending msg to box:
>>>> <127.0.0.1>
>>>> 2014-11-27 16:28:25 [3834] [7] DEBUG: sms_router: handling message
>>>> (0x7f9220000c20 vs 0x7f9220000c20)
>>>> 2014-11-27 16:28:25 [3834] [7] DEBUG: re-queing SMS not-yet-to-be resent
>>>> 2014-11-27 16:28:25 [3834] [7] DEBUG: sms_router: handling message
>>>> (0x7f9220000c20 vs 0x7f9220000c20)
>>>> 2014-11-27 16:28:25 [3834] [7] DEBUG: re-queing SMS not-yet-to-be resent
>>>> 2014-11-27 16:28:25 [3834] [7] DEBUG: sms_router: time to sleep 30.00
>>>> secs.
>>>> 2014-11-27 16:28:28 [3834] [8] DEBUG: Dumping 2 messages to store
>>>> 2014-11-27 16:28:48 [3834] [1] DEBUG: Timeout for fd:34 appeares.
>>>> 2014-11-27 16:28:48 [3834] [1] DEBUG: HTTP: Destroying HTTPClient area
>>>> 0x7f9240000a90.
>>>> 2014-11-27 16:28:48 [3834] [1] DEBUG: HTTP: Destroying HTTPClient for
>>>> `127.0.0.1'.
>>>> 2014-11-27 16:28:55 [3834] [7] DEBUG: sms_router: gwlist_len = 1
>>>> 2014-11-27 16:28:55 [3834] [7] DEBUG: sms_router: handling message
>>>> (0x7f9220000c20 vs 0x7f9220000c20)
>>>> 2014-11-27 16:28:55 [3834] [7] DEBUG: re-queing SMS not-yet-to-be resent
>>>> 2014-11-27 16:28:55 [3834] [7] DEBUG: sms_router: handling message
>>>> (0x7f9220000c20 vs 0x7f9220000c20)
>>>> 2014-11-27 16:28:55 [3834] [7] DEBUG: re-queing SMS not-yet-to-be resent
>>>> 2014-11-27 16:28:55 [3834] [7] DEBUG: sms_router: time to sleep 30.00
>>>> secs.
>>>> 2014-11-27 16:29:25 [3834] [7] DEBUG: sms_router: gwlist_len = 1
>>>> 2014-11-27 16:29:25 [3834] [7] DEBUG: sms_router: handling message
>>>> (0x7f9220000c20 vs 0x7f9220000c20)
>>>> 2014-11-27 16:29:25 [3834] [7] DEBUG: Message routed successfully.
>>>>
>>>>
>>>> *smsbox*
>>>>
>>>> 2014-11-27 16:28:16 [3874] [2] DEBUG: HTTP: Creating HTTPClient for
>>>> `127.0.0.1'.
>>>> 2014-11-27 16:28:16 [3874] [2] DEBUG: HTTP: Created HTTPClient area
>>>> 0x7fb5d0000a90.
>>>> 2014-11-27 16:28:16 [3874] [3] INFO: smsbox: Got HTTP request
>>>> </cgi-bin/sendsms> from <127.0.0.1>
>>>> 2014-11-27 16:28:16 [3874] [3] INFO: sendsms used by <playsms>
>>>> 2014-11-27 16:28:16 [3874] [3] INFO: sendsms sender:<playsms:9173010133>
>>>> (127.0.0.1) to:<9974740823> msg:<hi budddy!>
>>>> 2014-11-27 16:28:16 [3874] [3] DEBUG: Stored UUID
>>>> 7d868996-9a92-4026-ac31-348dd3450c0b
>>>> 2014-11-27 16:28:16 [3874] [3] DEBUG: message length 10, sending 1
>>>> messages
>>>> 2014-11-27 16:28:16 [3874] [3] DEBUG: Status: 202 Answer: <Sent.>
>>>> 2014-11-27 16:28:16 [3874] [3] DEBUG: Delayed reply - wait for bearerbox
>>>> 2014-11-27 16:28:16 [3874] [0] DEBUG: Got ACK (0) of
>>>> 7d868996-9a92-4026-ac31-348dd3450c0b
>>>> 2014-11-27 16:28:16 [3874] [0] DEBUG: HTTP: Resetting HTTPClient for
>>>> `127.0.0.1'.
>>>> 2014-11-27 16:29:16 [3874] [1] DEBUG: Timeout for fd:24 appeares.
>>>> 2014-11-27 16:29:16 [3874] [1] DEBUG: HTTP: Destroying HTTPClient area
>>>> 0x7fb5d0000a90.
>>>> 2014-11-27 16:29:16 [3874] [1] DEBUG: HTTP: Destroying HTTPClient for
>>>> `127.0.0.1'.
>>>>
>>>> How to to figure out the actual problem, why sms is not being sent? Any
>>>> idea or thought on this will be appreciated .
>>>>
>>>>
>>>> Regards
>>>> Juned Khan / Network Engineer
>>>> +91 9974740823/ juned.k...@inextrix.com
>>>>
>>>> iNextrix Technologies Pvt Ltd.
>>>> www.inextrix.com <http://htmlsig.com/www.inextrix.com>
>>>>
>>>> [image: Facebook] <https://www.facebook.com/junedkhan23> [image:
>>>> Twitter] <https://twitter.com/juned23> [image: Google Plus]
>>>> <https://plus.google.com/+JunedKhan> [image: Linkedin]
>>>> <http://htmlsig.com/in.linkedin.com/in/junedk>
>>>>
>>>> This e-mail message may contain confidential or legally privileged
>>>> information and is intended only for the use of the intended recipient(s).
>>>> Any unauthorized disclosure, dissemination, distribution, copying or the
>>>> taking of any action in reliance on the information herein is prohibited.
>>>> E-mails are not secure and cannot be guaranteed to be error free as they
>>>> can be intercepted, amended, or contain viruses. Anyone who communicates
>>>> with us by e-mail is deemed to have accepted these risks. Company Name is
>>>> not responsible for errors or omissions in this message and denies any
>>>> responsibility for any damage arising from the use of e-mail. Any opinion
>>>> and other statement contained in this message and any attachment are solely
>>>> those of the author and do not necessarily represent those of the company.
>>>>
>>>
>>>
>>
>
