Hi
Some loose ideas.
Have you tried a hard reset? i.e. power off /disconnect power, wait
some seconds and reconnect the power?
Are you able to see a reason for this from logs? i.e. happens each n
seconds, after x command, when sending MT or when receiving MO
Are other "related messages" on other logs?
It might be also a problem with modem firmware that got somehow damaged.
Have you tried to re-flash it?
Does it also reboots with kannel disconnected? i.e. shut kannel down and
connect to it through minicom or vwdial and try to send/receive sms from it.
Regards
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
Visitenos en www.perusms.com
On Fri, Oct 3, 2014 at 2:56 AM, ha...@aeon.pk <ha...@aeon.pk> wrote:
> Someone.... Help.... Please.... :-)
>
> On Wed, Oct 1, 2014 at 9:37 PM, ha...@aeon.pk <ha...@aeon.pk> wrote:
>
>> Hi,
>>
>> I am using kannel with a USB GSM modem. Following line is consistently
>> appearing in the logs:
>>
>> 2014-10-01 18:34:19 [20409] [6] DEBUG: AT2[mobile]: <--
>> ^BOOT:20215406,0,0,0,39
>>
>> Does this mean the modem is rebooting? Any reason someone knows of? Also,
>> how to get rid of it?
>>
>> Please note that I am also able to send/receive SMS from the modem
>> successfully. Just that when this command comes, the modem suspends
>> activity till 30 seconds or so.
>>
>> My modem-related config:
>>
>> group = smsc
>> smsc = at
>> smsc-id = mobile
>> modemtype = auto
>> device = /dev/ttyUSB0
>> speed = 0
>> keepalive = 60
>> my-number = +XXXXXXXXX
>> sim-buffering = true
>>
>> group = modems
>> id = generic
>> name = "Generic modem"
>> message-start = 0
>> #detect-string = "huawei"
>> init-string = "AT+CNMI=2,1,0,0,0"
>> message-storage = "SM"
>> #enable-hwhs = "AT+IFC=2,2"
>>
>> Regards,
>> Hamza
>>
>
>
