Most probably your CNMI settings for AT are not OK. I am not sure about Huawei modem, but try 2,1,0,0,0, or some other combination.
Also post your config. On Sat, Jun 21, 2014 at 10:19 PM, Hatem Sabrey <[email protected]> wrote: > Hello all, > > after long period of reading and trying to configure the kannel server, it > is now working and sending SMS... > > > but i cannot receive SMS ?? > > Details > when Using the USB modem Huawei K3565... > > the tail for the smsc001.log shows that the device is opened according to > the following log(1) part, and when sending the SMS it sent normally. > > but i cannot receive any SMS to the system even there is no record that > there is any action is initiated from the modem to the smsbox. > > thank you for your help in advance. > > > ########################### Log(1) ############################ > 2014-06-21 18:16:09 [17529] [6] INFO: AT2[dongle01]: opening device > 2014-06-21 18:16:09 [17529] [6] DEBUG: AT2[dongle01]: device opened. > Telnet mode = 0 > 2014-06-21 18:16:09 [17529] [6] DEBUG: AT2[dongle01]: device opened > 2014-06-21 18:16:09 [17529] [6] INFO: AT2[dongle01]: Logging in > 2014-06-21 18:16:10 [17529] [6] INFO: AT2[dongle01]: init device > 2014-06-21 18:16:10 [17529] [6] INFO: AT2[dongle01]: speed set to 115200 > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: --> ATZ^M > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: --> AT^M > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: <-- AT > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: --> AT&F^M > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: <-- AT&F > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: --> ATE0^M > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: <-- ATE0 > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: --> AT+IFC=2,2^M > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: --> AT+CPIN?^M > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: <-- +CPIN: READY > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: --> AT+CSCA=" > +218929290120"^M > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: --> AT+CMGF=0^M > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:16:10 [17529] [6] DEBUG: AT2[dongle01]: --> AT+CSMS=?^M > 2014-06-21 18:16:11 [17529] [6] DEBUG: AT2[dongle01]: <-- +CSMS: (0-1) > 2014-06-21 18:16:11 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:16:11 [17529] [6] DEBUG: AT2[dongle01]: --> > AT+CNMI=1,2,0,1,0^M > 2014-06-21 18:16:11 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:16:11 [17529] [6] DEBUG: AT2[dongle01]: --> AT+CPMS="SM"^M > 2014-06-21 18:16:11 [17529] [6] DEBUG: AT2[dongle01]: <-- +CPMS: > 0,50,0,50,0,50 > 2014-06-21 18:16:11 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:16:11 [17529] [6] INFO: AT2[dongle01]: AT SMSC successfully > opened. > 2014-06-21 18:16:13 [17529] [6] DEBUG: AT2[dongle01]: --> AT+CPMS?^M > 2014-06-21 18:16:13 [17529] [6] DEBUG: AT2[dongle01]: <-- +CPMS: > "SM",0,50,"SM",0,50,"SM",0,50 > 2014-06-21 18:16:13 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:17:15 [17529] [6] DEBUG: AT2[dongle01]: --> AT+CPMS?^M > 2014-06-21 18:17:15 [17529] [6] DEBUG: AT2[dongle01]: <-- +CPMS: > "SM",0,50,"SM",0,50,"SM",0,50 > 2014-06-21 18:17:15 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:18:17 [17529] [6] DEBUG: AT2[dongle01]: --> AT+CPMS?^M > 2014-06-21 18:18:17 [17529] [6] DEBUG: AT2[dongle01]: <-- +CPMS: > "SM",0,50,"SM",0,50,"SM",0,50 > 2014-06-21 18:18:17 [17529] [6] DEBUG: AT2[dongle01]: <-- OK > 2014-06-21 18:19:19 [17529] [6] DEBUG: AT2[dongle01]: --> AT+CPMS?^M > 2014-06-21 18:19:19 [17529] [6] DEBUG: AT2[dongle01]: <-- +CPMS: > "SM",0,50,"SM",0,50,"SM",0,5 > ################################################# > > > > > > >
