Hi
Check your modem log --in debug mode--. If call "hits" your modem you
should see at least one ring entry. Note that there is an AT command
to tell the modem to drop any incoming call at the first ring... sorry
didn't remember which... getting to my 50ties :)
It might also be that your SIM (operator configuration) does not allow
voice calls. Try moving sim to a standard phone a test calling from
/to that device and/or talk to your operator to see if voice calls are
allowed on your sim.
You can also try the opposite: Put the working sim from your phone to
the modem and try to call it.
Regards
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.com
On Tue, Jun 3, 2014 at 10:28 AM, Alok Srivastava <[email protected]> wrote:
> thanks Alvaro for ur help, actually i was not saying ring on modem,
> i was not listening any ring on my mobile when i m calling any number of
> modem.
> when i call a number of modem from my mobile no, it just cut off the phone.
> when i stop kannel, ring goes properly....................
> i want call can also be handled with kannel.............but problem is that
> call is not going on modem's number
> when kannel is running.
>
> Regards
> Abhi
>
>
> On Tue, Jun 3, 2014 at 7:18 PM, Alvaro Cornejo <[email protected]>
> wrote:
>>
>> Hi
>>
>> Modems usually does not have speakers; therefore you will not hear any
>> ring; however if you have your logs in debug mode, you will see a
>> "ring" entry on it. You might also need to set your modem to verbose
>> messages (AT+CMEE). Also, if you want to 'see' the caller number along
>> the 'ring' entry, you need to enable that in modem configuration. I
>> think command AT+CLI is the one does that. You need to add it to modem
>> init config. Check AT command set info for details.
>>
>> As for receiving a sms with the caller information, kannel does not do
>> it. You can patch it in order to do that or you can parse kannel log
>> in order to get that information and send the sms.
>>
>> Regards
>>
>> Alvaro
>>
>>
>>
>> |-----------------------------------------------------------------------------------------------------------------|
>> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
>> celular y Nextel
>> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
>> SMS y GPRS online
>> Visitenos en www.perusms.com
>>
>>
>> On Tue, Jun 3, 2014 at 4:22 AM, Alok Srivastava <[email protected]> wrote:
>> > Actually not getting any ring when try to calling on numbers of modem.
>> >
>> > Regards
>> >
>> >
>> > On Tue, Jun 3, 2014 at 2:47 PM, Alok Srivastava <[email protected]>
>> > wrote:
>> >>
>> >> Dear list
>> >>
>> >> Plz help
>> >> i am using wavecom 16 port modem for incoming messages, using sqlbox
>> >> getting messages properly, but there is a requirement if somebody
>> >> calling on
>> >> numbers of modem i want a sms message on my mobile that "incoming call
>> >> from
>> >> this number 91XXXXXXXXXX".
>> >> Is it Possible.
>> >> Please Help
>> >>
>> >> Regards
>> >> Abhi
>> >
>> >
>
>
