Thanks Murgor, The user has already connected to me and I can receive messages from him. The issue is how I can now send a message to him as an SMPP client to my opensmppbox.
On Fri, May 23, 2014 at 11:53 AM, Murgor Bendon <bendonmur...@gmail.com>wrote: > Once you have a user binding to your OpenSMPP, the normal way, he will > create the send service. > This will enable sending of texts. > Make sure the user can bind to your box. > > > > > Best Regards, > *Bendon Murgor *: Systems Engineer/IT Systems Auditor. > *Phone*: Kenya: +254-720529868 > Twitter: @bendonmurgor <http://twitter.com/bendonmurgor> > > > On Fri, May 23, 2014 at 11:44 AM, MOSES KARIUKI <kariuk...@gmail.com>wrote: > >> Hey Murgor, >> >> I have read this user guide over and over again and it does not say how >> one can send a message to an SMPP client connected to my BB through >> OpenSMPP box proxy. It seems incomplete unless you have a more complete one. >> Here is what it says: >> Everything you need to install and use OpenSMPPBox is in User’s Guide. >> The guide is still incomplete in this respect. The README is not supposed >> to be very important .... >> >> >> Thanks, >> Moses >> >> >> On Fri, May 23, 2014 at 11:33 AM, Murgor Bendon >> <bendonmur...@gmail.com>wrote: >> >>> Hey Kariuki, >>> >>> Refer to this Guide >>> http://sourceforge.net/p/kannelappliance/wiki/Configuration/attachment/opensmppbox-userguide.pdf >>> >>> >>> >>> >>> Best Regards, >>> *Bendon Murgor *: Systems Engineer/IT Systems Auditor. >>> *Phone*: Kenya: +254-720529868 >>> Twitter: @bendonmurgor <http://twitter.com/bendonmurgor> >>> >>> >>> On Fri, May 23, 2014 at 11:22 AM, MOSES KARIUKI <kariuk...@gmail.com>wrote: >>> >>>> Hi all, >>>> >>>> It might be a noob question. I just wanted to know how I can send an >>>> sms to an SMPP client connect to my Bearer Box via OpenSMPPBox in Kannel. >>>> >>>> Any pointers will be highly appreciated. >>>> >>>> PS. I have tried googling but haven't found any useful links. >>>> Please assist. >>>> >>>> Moses >>>> >>> >>> >> >
