You can use parameter *init-string *to initiate AT command. Please refer to the manual for detail.
group = modems id = wavecom name = Wavecom detect-string = "WAVECOM" init-string = "AT+CNMI=2,1,0,0,0;+CMEE=1" On Thu, Nov 29, 2012 at 1:42 PM, <[email protected]> wrote: > ** > Hunt, > > I don't think it is registered to telco network when inserted. I know AT > command to do manual registration. Is there a way to put this AT command in > a conf, so bearerbox can init it? > > > Chen Yee > Sent by DiGi from my BlackBerry® Smartphone > ------------------------------ > *From: * Hunt <[email protected]> > *Date: *Thu, 29 Nov 2012 13:39:39 +0800 > *To: *<[email protected]> > *Cc: *[email protected]<[email protected]> > *Subject: *Re: How to configure kannel to select a telco network for > wavecom modem ? > > The sim won't auto register itself to network when insert? > Do the modem indicate that the sim register to the network? > > > On Thu, Nov 29, 2012 at 1:31 PM, <[email protected]> wrote: > >> ** >> Hunt, >> >> I think all are correct, bec I just replaced it with popular sim, and >> worked. What else you want to know ? I can paste configure here. >> >> >> Chen Yee >> Sent by DiGi from my BlackBerry® Smartphone >> ------------------------------ >> *From: * Hunt <[email protected]> >> *Date: *Thu, 29 Nov 2012 13:26:05 +0800 >> *To: *<[email protected]> >> *Cc: *[email protected]<[email protected]> >> *Subject: *Re: How to configure kannel to select a telco network for >> wavecom modem ? >> >> If so, can you confirm you have correct configuration SMSC, MSISDN etc. >> It's very hard to nail it with common generic error. >> >> >> On Thu, Nov 29, 2012 at 1:19 PM, <[email protected]> wrote: >> >>> ** >>> Hunt, >>> >>> The sim working fine. No password. I did select telco network manually >>> in hyperterminal and can send out sms. >>> >>> Chen Yee >>> Sent by DiGi from my BlackBerry® Smartphone >>> ------------------------------ >>> *From: * Hunt <[email protected]> >>> *Date: *Thu, 29 Nov 2012 13:11:27 +0800 >>> *To: *chen yee tan<[email protected]> >>> *Cc: *[email protected]<[email protected]> >>> *Subject: *Re: How to configure kannel to select a telco network for >>> wavecom modem ? >>> >>> It should be work similar way. Perhaps your SIM need password to use or >>> out of coverage? >>> >>> >>> On Thu, Nov 29, 2012 at 1:02 PM, chen yee tan <[email protected]> wrote: >>> >>>> I have 2 telco sim cards. One is popular telco, working just fine. I >>>> can use http to send sms out. One is new telco, and kannel not able to send >>>> out sms. To fix, I think I need to configure kannel to select telco network >>>> manually. How to do that ? Any advice ? Below is my log from running >>>> bearerbox for failure case: >>>> >>>> 2012-11-29 12:55:36 [3345] [6] INFO: AT2[/dev/ttyS0]: init device >>>> 2012-11-29 12:55:36 [3345] [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 >>>> 2012-11-29 12:55:36 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> ATZ^M >>>> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >>>> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M >>>> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- AT >>>> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >>>> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M >>>> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- AT&F >>>> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >>>> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> ATE0^M >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- ATE0 >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+IFC=2,2^M >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CPIN?^M >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CPIN: READY >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGF=0^M >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CSMS=?^M >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CSMS: (0,1) >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >>>> 2012-11-29 12:55:39 [3345] [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is >>>> supported >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CSMS=1^M >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CSMS: 1,1,1 >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> >>>> AT+CNMI=1,2,0,1,0^M >>>> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >>>> 2012-11-29 12:55:39 [3345] [6] INFO: AT2[/dev/ttyS0]: AT SMSC >>>> successfully opened. >>>> 2012-11-29 12:55:50 [3345] [5] INFO: Client connected from <127.0.0.1> >>>> 2012-11-29 12:55:50 [3345] [5] DEBUG: Started thread 11 >>>> (gw/bb_boxc.c:function) >>>> 2012-11-29 12:55:50 [3345] [11] DEBUG: Thread 11 >>>> (gw/bb_boxc.c:function) maps to pid 3345. >>>> 2012-11-29 12:55:50 [3345] [11] DEBUG: Started thread 12 >>>> (gw/bb_boxc.c:boxc_sender) >>>> 2012-11-29 12:55:50 [3345] [12] DEBUG: Thread 12 >>>> (gw/bb_boxc.c:boxc_sender) maps to pid 3345. >>>> 2012-11-29 12:56:48 [3345] [11] DEBUG: boxc_receiver: sms received >>>> 2012-11-29 12:56:48 [3345] [11] DEBUG: send_msg: sending msg to box: >>>> <127.0.0.1> >>>> 2012-11-29 12:56:49 [3345] [6] DEBUG: AT2[/dev/ttyS0]: >>>> TP-Validity-Period: 24.0 hours >>>> 2012-11-29 12:56:49 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGS=23^M >>>> 2012-11-29 12:56:49 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- > >>>> 2012-11-29 12:56:49 [3345] [6] DEBUG: AT2[/dev/ttyS0]: send command >>>> status: 1 >>>> 2012-11-29 12:56:49 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> >>>> 0011000A8110325877350000A70BC8329BFD06DDDF723619 >>>> 2012-11-29 12:56:50 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> ^Z >>>> 2012-11-29 12:56:50 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- > >>>> 2012-11-29 12:56:50 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR >>>> 2012-11-29 12:56:50 [3345] [6] ERROR: AT2[/dev/ttyS0]: Generic error: >>>> ERROR >>>> 2012-11-29 12:56:50 [3345] [6] DEBUG: AT2[/dev/ttyS0]: send command >>>> status: -1 >>>> >>>> Chen Yee >>>> >>> >>> >> >
