Did that configuration & getting the same log message, -------------------------------------------------------------------------------------------------- 2012-09-12 01:05:16 [8841] [6] DEBUG: AT2[gsm]: detecting modem speed. 2012-09-12 01:05:16 [8841] [6] INFO: AT2[gsm]: opening device 2012-09-12 01:05:16 [8841] [6] DEBUG: AT2[gsm]: device opened. Telnet mode = 0 2012-09-12 01:05:17 [8841] [6] DEBUG: AT2[gsm]: device opened 2012-09-12 01:05:17 [8841] [6] INFO: AT2[gsm]: speed set to 115200 2012-09-12 01:05:17 [8841] [6] DEBUG: AT2[gsm]: --> ^M 2012-09-12 01:05:19 [8841] [6] DEBUG: AT2[gsm]: --> AT^M 2012-09-12 01:05:25 [8841] [6] DEBUG: AT2[gsm]: --> AT^M 2012-09-12 01:05:31 [8841] [6] DEBUG: AT2[gsm]: --> AT^M --------------------------------------------------------------------------------
Alvaro Cornejo wrote: > > Hi > > You need to add it on your smsc-at definition. You can set a separate > log for each smsc. > > group = smsc > smsc = at > smsc-id = modem1 > log-level = 0 > log-file = "/var/log/kannel/modem1.log" > ... > > > Regards > > Alvaro > > On 9/12/12, sudhakar_yg <[email protected]> wrote: >> >> How do i set the log for modem? I tried adding log field in group modems >> section, but kannel wouldn't start with it. >> >> >> Alvaro Cornejo wrote: >>> >>> Just for sake of better troubleshoot add a separate logfile for the >>> modem. This way it will be easyer to debug just modem. >>> >>> >>> >>> On 9/12/12, sudhakar_yg <[email protected]> wrote: >>>> >>>> Also I have followed the "Modem initialization" section in the 1.4.3 UG >>>> & >>>> have done the permissions settings accordingly. >>>> I have also tried run the kannel service as root user. But dont see any >>>> changes in the behavior. >>>> >>>> >>>> >>>> >>>> sudhakar_yg wrote: >>>>> >>>>> Thanks for reply Rene, >>>>> I had read about the permission issue on /dev/ttyUSB0. I have given >>>>> chmod >>>>> 777 permission to /dev/ttyUSB0. >>>>> I am able to access the modem over same port using minicom without any >>>>> issues. >>>>> If this permission is not proper, what else permissions i need to >>>>> give? >>>>> >>>>> Cheers, >>>>> Sudhakar >>>>> >>>>> >>>>> >>>>> Rene Kluwen wrote: >>>>>> >>>>>> Are you sure minicom responds when you enter /dev/ttyUSB0? >>>>>> If yes, maybe it's a permission issue. >>>>>> >>>>>> -----Original Message----- >>>>>> From: [email protected] >>>>>> [mailto:[email protected]] >>>>>> On >>>>>> Behalf Of sudhakar_yg >>>>>> Sent: Wednesday, 12 September, 2012 09:48 >>>>>> To: [email protected] >>>>>> Subject: Kannel With SIM300 GSM Modem >>>>>> >>>>>> >>>>>> Hi, >>>>>> I am setting up the kannel over simcom GSM modem. Attached is my >>>>>> configuration file. >>>>>> http://old.nabble.com/file/p34422189/simcom.conf simcom.conf When I >>>>>> try >>>>>> to >>>>>> bring up my bearerbox & monitor the SMPP log, Following are my SMPP & >>>>>> Kannel >>>>>> log, >>>>>> ---------------------------------------------------------------------------- >>>>>> ---------------------------------- >>>>>> SMPP LOG >>>>>> ---------------------------------------------------------------------------- >>>>>> ---------------------------------- >>>>>> 2012-09-12 01:05:16 [8841] [6] DEBUG: AT2[gsm]: detecting modem >>>>>> speed. >>>>>> 2012-09-12 01:05:16 [8841] [6] INFO: AT2[gsm]: opening device >>>>>> 2012-09-12 01:05:16 [8841] [6] DEBUG: AT2[gsm]: device opened. Telnet >>>>>> mode = >>>>>> 0 >>>>>> 2012-09-12 01:05:17 [8841] [6] DEBUG: AT2[gsm]: device opened >>>>>> 2012-09-12 01:05:17 [8841] [6] INFO: AT2[gsm]: speed set to 115200 >>>>>> 2012-09-12 01:05:17 [8841] [6] DEBUG: AT2[gsm]: --> ^M >>>>>> 2012-09-12 01:05:19 [8841] [6] DEBUG: AT2[gsm]: --> AT^M >>>>>> 2012-09-12 01:05:25 [8841] [6] DEBUG: AT2[gsm]: --> AT^M >>>>>> 2012-09-12 01:05:31 [8841] [6] DEBUG: AT2[gsm]: --> AT^M >>>>>> >>>>>> ---------------------------------------------------------------------------- >>>>>> ----------------------------------- >>>>>> Kannel Log >>>>>> ---------------------------------------------------------------------------- >>>>>> ---------------------------------- >>>>>> sudhakar@5DMark-II:~/kannel/sbin$ bearerbox ../config/simcom.conf >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Debug_lvl = -1, log_file = >>>>>> <none>, >>>>>> log_lvl = 0 >>>>>> 2012-09-12 12:55:42 [14593] [0] WARNING: DLR: using default >>>>>> 'internal' >>>>>> for >>>>>> storage type. >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: DLR using storage type: >>>>>> internal >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Kannel bearerbox version >>>>>> `svn-r4910M'. >>>>>> Build `Sep 6 2012 09:22:08', compiler `4.6.3'. >>>>>> System Linux, release 3.2.0-29-generic-pae, version #46-Ubuntu SMP >>>>>> Fri >>>>>> Jul >>>>>> 27 17:25:43 UTC 2012, machine i686. >>>>>> Hostname 5DMark-II, IP 127.0.1.1. >>>>>> Libxml version 2.7.8. >>>>>> Compiled with MySQL 5.5.24, using MySQL 5.5.24. >>>>>> Using native malloc. >>>>>> >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Added logfile >>>>>> `/home/sudhakar/kannel/logs/kannel.log' with level `0'. >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Started access logfile >>>>>> `/home/sudhakar/kannel/logs/access.log'. >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: SSL not supported, no SSL >>>>>> initialization done. >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: HTTP: Opening server at port >>>>>> 13000. >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 1 >>>>>> (gwlib/fdset.c:poller) >>>>>> 2012-09-12 12:55:42 [14593] [1] DEBUG: Thread 1 >>>>>> (gwlib/fdset.c:poller) >>>>>> maps >>>>>> to pid 14593. >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 2 >>>>>> (gwlib/http.c:server_thread) >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 3 >>>>>> (gw/bb_http.c:httpadmin_run) >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: starting smsbox connection >>>>>> module >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: BOXC: 'smsbox-max-pending' not >>>>>> set, >>>>>> using default (100). >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Adding smsbox routing to id >>>>>> <smsbox> >>>>>> for smsc id <gsm> >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 4 >>>>>> (gw/bb_boxc.c:sms_to_smsboxes) >>>>>> 2012-09-12 12:55:42 [14593] [4] DEBUG: Thread 4 >>>>>> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 14593. >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 5 >>>>>> (gw/bb_boxc.c:smsboxc_run) >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Set SMS resend frequency to 60 >>>>>> seconds. >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: SMS resend retry set to >>>>>> unlimited. >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: MO concatenated message >>>>>> handling >>>>>> enabled >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: DLR rerouting for smsc id <gsm> >>>>>> disabled. >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Added logfile >>>>>> `/home/sudhakar/kannel/logs/smpp.log' with level `0'. >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: AT2[gsm]: configuration doesn't >>>>>> show >>>>>> modemtype. will autodetect >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 6 >>>>>> (gw/smsc/smsc_at.c:at2_device_thread) >>>>>> 2012-09-12 12:55:42 [14593] [6] DEBUG: Thread 6 >>>>>> (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 14593. >>>>>> 2012-09-12 12:55:42 [14593] [6] INFO: Logging thread `6' to logfile >>>>>> `/home/sudhakar/kannel/logs/smpp.log' with level `0'. >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 7 >>>>>> (gw/bb_smscconn.c:sms_router) >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: >>>>>> ---------------------------------------- >>>>>> 2012-09-12 12:55:42 [14593] [5] DEBUG: Thread 5 >>>>>> (gw/bb_boxc.c:smsboxc_run) >>>>>> maps to pid 14593. >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Kannel bearerbox II version >>>>>> svn-r4910M >>>>>> starting >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Loading store file >>>>>> `/home/sudhakar/kannel/logs/kannel.store' >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Store-file size 0, starting to >>>>>> unpack >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Retrieved 0 messages, >>>>>> non-acknowledged >>>>>> messages: 0 >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 8 >>>>>> (gw/bb_store_file.c:store_dumper) >>>>>> 2012-09-12 12:55:42 [14593] [8] DEBUG: Thread 8 >>>>>> (gw/bb_store_file.c:store_dumper) maps to pid 14593. >>>>>> 2012-09-12 12:55:42 [14593] [7] DEBUG: Thread 7 >>>>>> (gw/bb_smscconn.c:sms_router) maps to pid 14593. >>>>>> 2012-09-12 12:55:42 [14593] [0] INFO: MAIN: Start-up done, entering >>>>>> mainloop >>>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: AT2[gsm]: start called >>>>>> 2012-09-12 12:55:42 [14593] [8] DEBUG: Dumping 0 messages to store >>>>>> 2012-09-12 12:55:42 [14593] [3] DEBUG: Thread 3 >>>>>> (gw/bb_http.c:httpadmin_run) >>>>>> maps to pid 14593. >>>>>> 2012-09-12 12:55:42 [14593] [2] DEBUG: Thread 2 >>>>>> (gwlib/http.c:server_thread) >>>>>> maps to pid 14593. >>>>>> 2012-09-12 12:55:42 [14593] [2] DEBUG: HTTP: Including port 13000, fd >>>>>> 11 >>>>>> for >>>>>> polling in server thread >>>>>> >>>>>> ---------------------------------------------------------------------------- >>>>>> ----------------------------------- >>>>>> >>>>>> After this kannel doesn't proceed further from there & I don't see >>>>>> the >>>>>> SMSC >>>>>> connectivity happening. >>>>>> I have used minicom & derived on the appropriate AT commands for init >>>>>> strings. Did a lot of googling & did not find solution for my >>>>>> problem. >>>>>> Please suggest a solution & let me know where am I going wrong with >>>>>> my >>>>>> setup. >>>>>> >>>>>> Thanks in advance, >>>>>> Sudhakar >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> View this message in context: >>>>>> http://old.nabble.com/Kannel-With-SIM300-GSM-Modem-tp34422189p34422189.html >>>>>> Sent from the Kannel - User mailing list archive at Nabble.com. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> -- >>>> View this message in context: >>>> http://old.nabble.com/Kannel-With-SIM300-GSM-Modem-tp34422189p34423838.html >>>> Sent from the Kannel - User mailing list archive at Nabble.com. >>>> >>>> >>>> >>> >>> >>> -- >>> |-----------------------------------------------------------------------------------------------------------------| >>> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier >>> celular y Nextel >>> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via >>> SMS y GPRS online >>> Visitenos en www.perusms.NET www.smsglobal.com.mx y >>> www.pravcom.com >>> >>> >>> >> >> -- >> View this message in context: >> http://old.nabble.com/Kannel-With-SIM300-GSM-Modem-tp34422189p34424704.html >> Sent from the Kannel - User mailing list archive at Nabble.com. >> >> >> > > > -- > |-----------------------------------------------------------------------------------------------------------------| > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel > en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > SMS y GPRS online > Visitenos en www.perusms.NET www.smsglobal.com.mx y > www.pravcom.com > > > -- View this message in context: http://old.nabble.com/Kannel-With-SIM300-GSM-Modem-tp34422189p34424972.html Sent from the Kannel - User mailing list archive at Nabble.com.
