On Sat, 2012-02-11 at 14:38, Ahmed Shabana wrote: > Sorry for interrupt , I think It was a delimiter problem and > solved now when I replaced spaces with tabs
In my config it works with spaces as delimiters. > Best Regards, > > Ahmed Shabana| System Engineer | Creative Communication Solutions > Egypt Cell +20 (10) 3325373 | KSA Cell +966 (50) 0259791 > Skype_id : AhmedShabana2000 > > From: Ahmed Shabana > Sent: Saturday, February 11, 2012 4:33 PM > To: 'Rene Kluwen'; 'Otandeka Simon Peter'; 'Kannel Users' > Subject: RE: bind to Opensmppbox fail !! > > The same error !! > > Find the below dump > > SMPP[smppbox1]: Got PDU: > SMPP PDU 0x7f0ebc000d60 dump: > type_name: bind_transmitter > command_id: 2 = 0x00000002 > command_status: 0 = 0x00000000 > sequence_number: 1 = 0x00000001 > system_id: "shabana" > password: "shabana" > system_type: "mainbox1" > interface_version: 52 = 0x00000034 > addr_ton: 0 = 0x00000000 > addr_npi: 0 = 0x00000000 > address_range: NULL > SMPP PDU dump ends. > SMPP[smppbox1]: Sending PDU: > SMPP PDU 0x7f0ebc000ff0 dump: > type_name: bind_transmitter_resp > command_id: 2147483650 = 0x80000002 > command_status: 13 = 0x0000000d > sequence_number: 1 = 0x00000001 > system_id: NULL > SMPP PDU dump ends. > > Best Regards, > > Ahmed Shabana| System Engineer | Creative Communication Solutions > Egypt Cell +20 (10) 3325373 | KSA Cell +966 (50) 0259791 > Skype_id : AhmedShabana2000 > > From: Rene Kluwen [mailto:[email protected]] > Sent: Saturday, February 11, 2012 3:04 PM > To: Ahmed Shabana; 'Otandeka Simon Peter'; 'Kannel Users' > Subject: RE: bind to Opensmppbox fail !! > > The system-id, password, system-type should be: shabana shabana mainbox1. > > == Rene > > From: Ahmed Shabana [mailto:[email protected]] > Sent: Saturday, 11 February, 2012 13:19 > To: Rene Kluwen; 'Otandeka Simon Peter'; 'Kannel Users' > Subject: RE: bind to Opensmppbox fail !! > > This is the bind_transceiver PDU > > Got PDU: > SMPP PDU 0x7fcfdc000d50 dump: > type_name: bind_transceiver > command_id: 9 = 0x00000009 > command_status: 0 = 0x00000000 > sequence_number: 773 = 0x00000305 > system_id: "client" > password: "passw" > system_type: "client" > interface_version: 81 = 0x00000051 > addr_ton: 0 = 0x00000000 > addr_npi: 0 = 0x00000000 > address_range: NULL > SMPP PDU dump ends. > SMPP[smppbox1]: Sending PDU: > SMPP PDU 0x7fcfdc000fe0 dump: > type_name: bind_transceiver_resp > command_id: 2147483657 = 0x80000009 > command_status: 13 = 0x0000000d > sequence_number: 773 = 0x00000305 > system_id: NULL > > > Best Regards, > > Ahmed Shabana| System Engineer | Creative Communication Solutions > Skype_id : AhmedShabana2000 > > From: Rene Kluwen [mailto:[email protected]] > Sent: Thursday, February 09, 2012 10:25 PM > To: Ahmed Shabana; 'Otandeka Simon Peter'; 'Kannel Users' > Subject: RE: bind to Opensmppbox fail !! > > Please post the bind_transceiver pdu as well. > > == Rene > > > From: Ahmed Shabana [mailto:[email protected]] > Sent: Thursday, 09 February, 2012 15:27 > To: Rene Kluwen; 'Otandeka Simon Peter'; 'Kannel Users' > Subject: bind to Opensmppbox fail !! > > I am just installed the smppbox > And cannot bind to it , it gives me this error in bind > > type_name: bind_transceiver_resp > command_id: 2147483657 = 0x80000009 > command_status: 13 = 0x0000000d > > I installed the last version of gateway and opensmppbox from (svn.kannel.org) > and this is the conf file that I use > > include = "kannel.conf.2" > # Proxy configuration > group = opensmppbox > bearerbox-host = 127.0.0.1 > bearerbox-port = 53001 > opensmppbox-id = smppbox1 > opensmppbox-port = 13001 > #log-file = /var/log/kannel/opensmppbox.log > log-level = 0 > our-system-id = opensmppid > #Inaccess > # New accounts > smpp-logins="SMPPClients.txt" > > and > > vim SMPPClients.txt > shabana shabana mainbox1 *.*.*.* > > have anyone face this issue ? > > > Best Regards, > > Ahmed Shabana| System Engineer | Creative Communication Solutions > Skype_id : AhmedShabana2000 > > From: [email protected] [mailto:[email protected]] On Behalf Of > Rene Kluwen > Sent: Friday, December 09, 2011 2:13 PM > To: 'Otandeka Simon Peter' > Cc: 'Kannel Users' > Subject: RE: Opensmppbox throughput > > Onfurtunately, this isn't possible. > > From: Otandeka Simon Peter [mailto:[email protected]] > Sent: Thursday, 08 December, 2011 14:56 > To: Rene Kluwen > Cc: Kannel Users > Subject: Opensmppbox throughput > > > Hi Rene, > > Is it possible to configure a throughput for each smppbox login created? > Or can there be a limit on each login created? > > Thanks, > Peter. -- Kind regards, Milan -------------------------------------------------- Arvanta, IT Security http://www.arvanta.net Please do not send me e-mail containing HTML code or documents in proprietary format (word, excel, pps and so on)
