Ok Willy, will do that and respond Merci
________________________________ From: "users-requ...@kannel.org" <users-requ...@kannel.org> To: users@kannel.org Sent: Wednesday, January 25, 2012 2:16 PM Subject: users Digest, Vol 65, Issue 38 Send users mailing list submissions to users@kannel.org To subscribe or unsubscribe via the World Wide Web, visit http://www.kannel.org/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-requ...@kannel.org You can reach the person managing the list at users-ow...@kannel.org When replying, please edit your Subject line so it is more specific than "Re: Contents of users digest..." Today's Topics: 1. Re: kannel not recieving sms (Willy Mularto) ---------------------------------------------------------------------- Message: 1 Date: Wed, 25 Jan 2012 18:15:43 +0700 From: Willy Mularto <sangpr...@gmail.com> To: "Juan Pablo Fernandez" <jpfernan...@ipcomsa.com> Cc: users@kannel.org Subject: Re: kannel not recieving sms Message-ID: <cb9cc91a-a8e7-46df-b119-dcf970020...@gmail.com> Content-Type: text/plain; charset="iso-8859-1" check your bearerbox-access log, and sent_sms table, all traffics should be stored there. On Jan 25, 2012, at 6:10 PM, Juan Pablo Fernandez wrote: > Hi, > 1) did you try post-url instead of get-url? > 2) You should send the piece of log from _bearbox.log, _smsbox.log and > kannel-sqlbox.log to see what kannel logs when a sms arrives. > > I hope it helps > ----- Original Message ----- > From: Merci Maya > To: users@kannel.org > Sent: Tuesday, January 24, 2012 5:25 PM > Subject: kannel not recieving sms > > Hi all. I am new to Kannel, and have been trying to get sms being sent to my > application. I am able to send sms to a mobile phone from my application but > cannot receive from a mobile phone. I have had sleepless nights on this. Any > one can see my fault? I am using a Huawei Dongle. Fakesmsc was ok, even when > I use get-url in the addressbar, it passes %p, %P, %q, %Q and %r to my > database. > > I have run ./bearerbox then ./sqlbox qnd then ./smsbox > > Below are my configurations. Any assistance will be appreciated. > > ============== > smskannel.config > ============== > #Sample configuration file for Kannel bearerbox on Debian. > # See the documentation for explanations of fields. > # > > # HTTP administration is disabled by default. Make sure you set the > # password if you enable it. > > group = core > admin-port = 13015 > admin-password = foobar > #admin-deny-ip = "*.*.*.*" > admin-allow-ip = "127.0.0.1" > dlr-storage = mysql > smsbox-port = 13016 > #wdp-interface-name = "*" > log-file = "/tmp/_bearerbox.log" > access-log = "/tmp/_access.log" > #box-deny-ip = "*.*.*.*" > box-allow-ip = "127.0.0.1" > log-level = 0 > > group = smsc > smsc = at > modemtype = auto > device= /dev/ttyUSB0 > my-number = xxxxxxxxxxxx > connect-allow-ip = 127.0.0.1 > sim-buffering = true > log-level = 0 > > # DLR with MySQL support configuration > group = mysql-connection > id = mydlr > host = localhost > username = mysqluser > password = musqlpwd > database = mysqldatabase > > group = dlr-db > id = mydlr > table = playsms_kannel_dlr > field-smsc = smsc > field-timestamp = ts > field-source=source > field-destination = destination > field-service = service > field-url = url > field-mask = mask > field-status = status > field-boxc-id = boxc > > group = modems > id = huawei > name = "Huawei" > detect-string = "huawei" > init-string = "ATZ" > init-string = "AT+CMEE=1" > init-string = "AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > init-string = "AT+CNMI=1,2,0,0,0;+CMEE=1" > #init-string = "AT+CNMI=0,1" > message-storage = SM > message-start = 0 > > group = smsbox > smsbox-id = mysmsc > bearerbox-host = "127.0.0.1" > bearerbox-port = 13017 > sendsms-port = 13018 > access-log = "/tmp/_smsbox-access.log" > log-file = "/tmp/_smsbox.log" > log-level = 0 > mo-recode = true > > group = smsbox-route > smsbox-id = mysmsc > > group = sendsms-user > username = tester > password = foobar > concatenation= true > max-messages = 10000 > > group = sms-service > keyword-regex = .* > catch-all = yes > accepted-smsc = huawei_e220 > max-messages = 3 > get-url = > "http://localhost/playsms/plugin/gateway/kannel/geturl.php?t=%t&q=%p&a=%r&Q=%P&d=%d"; > > > ========= > bearerbox log > ==================================================== > 2012-01-24 23:20:29 [13347] [0] INFO: Added logfile `/tmp/_bearerbox.log' > with level `0'. > 2012-01-24 23:20:29 [13347] [0] INFO: Started access logfile > `/tmp/_access.log'. > 2012-01-24 23:20:29 [13347] [0] INFO: HTTP: Opening server at port 13015. > 2012-01-24 23:20:29 [13347] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller) > 2012-01-24 23:20:29 [13347] [0] DEBUG: Started thread 2 > (gwlib/http.c:server_thread) > 2012-01-24 23:20:29 [13347] [0] DEBUG: Started thread 3 > (gw/bb_http.c:httpadmin_run) > 2012-01-24 23:20:29 [13347] [0] DEBUG: starting smsbox connection module > 2012-01-24 23:20:29 [13347] [0] INFO: BOXC: 'smsbox-max-pending' not set, > using default (100). > 2012-01-24 23:20:29 [13347] [0] DEBUG: Started thread 4 > (gw/bb_boxc.c:sms_to_smsboxes) > 2012-01-24 23:20:29 [13347] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) > maps to pid 13347. > 2012-01-24 23:20:29 [13347] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps > to pid 13347. > 2012-01-24 23:20:29 [13347] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) > maps to pid 13347. > 2012-01-24 23:20:29 [13347] [2] DEBUG: HTTP: Including port 13015, fd 9 for > polling in server thread > 2012-01-24 23:20:29 [13347] [4] DEBUG: Thread 4 > (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 13347. > 2012-01-24 23:20:29 [13347] [0] DEBUG: Started thread 5 > (gw/bb_boxc.c:smsboxc_run) > 2012-01-24 23:20:29 [13347] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) > maps to pid 13347. > 2012-01-24 23:20:29 [13347] [0] INFO: Set SMS resend frequency to 60 seconds. > 2012-01-24 23:20:29 [13347] [0] INFO: SMS resend retry set to unlimited. > 2012-01-24 23:20:29 [13347] [0] DEBUG: MO concatenated message handling > enabled > 2012-01-24 23:20:29 [13347] [0] INFO: DLR rerouting for smsc id <huawei_e220> > disabled. > 2012-01-24 23:20:29 [13347] [0] INFO: AT2[huawei_e220]: configuration shows > modemtype <huawei> > 2012-01-24 23:20:29 [13347] [0] DEBUG: AT2[huawei_e220]: Reading modem > definitions from <smskannels.conf> > 2012-01-24 23:20:29 [13347] [0] DEBUG: AT2[huawei_e220]: Found <1> modems in > config > 2012-01-24 23:20:29 [13347] [0] INFO: AT2[huawei_e220]: modemtype not found, > revert to autodetect > 2012-01-24 23:20:29 [13347] [0] DEBUG: Started thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) > 2012-01-24 23:20:29 [13347] [6] DEBUG: Thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 13347. > 2012-01-24 23:20:29 [13347] [6] DEBUG: AT2[huawei_e220]: detecting modem > speed. > 2012-01-24 23:20:29 [13347] [6] INFO: AT2[huawei_e220]: opening device > 2012-01-24 23:20:29 [13347] [0] DEBUG: Started thread 7 > (gw/bb_smscconn.c:sms_router) > 2012-01-24 23:20:29 [13347] [6] DEBUG: AT2[huawei_e220]: device opened. > Telnet mode = 0 > 2012-01-24 23:20:29 [13347] [0] INFO: ---------------------------------------- > 2012-01-24 23:20:29 [13347] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) > maps to pid 13347. > 2012-01-24 23:20:29 [13347] [0] INFO: Kannel bearerbox II version 1.5.0 > starting > 2012-01-24 23:20:29 [13347] [0] INFO: MAIN: Start-up done, entering mainloop > 2012-01-24 23:20:29 [13347] [0] DEBUG: AT2[huawei_e220]: start called > 2012-01-24 23:20:30 [13347] [6] DEBUG: AT2[huawei_e220]: device opened > 2012-01-24 23:20:30 [13347] [6] INFO: AT2[huawei_e220]: speed set to 115200 > 2012-01-24 23:20:30 [13347] [6] DEBUG: AT2[huawei_e220]: --> ^M > 2012-01-24 23:20:32 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT^M > 2012-01-24 23:20:32 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:32 [13347] [6] INFO: AT2[huawei_e220]: Closing device > 2012-01-24 23:20:32 [13347] [6] INFO: AT2[huawei_e220]: detect speed is 115200 > 2012-01-24 23:20:32 [13347] [6] DEBUG: AT2[huawei_e220]: detecting modem type > 2012-01-24 23:20:32 [13347] [6] INFO: AT2[huawei_e220]: opening device > 2012-01-24 23:20:32 [13347] [6] DEBUG: AT2[huawei_e220]: device opened. > Telnet mode = 0 > 2012-01-24 23:20:33 [13347] [6] DEBUG: AT2[huawei_e220]: device opened > 2012-01-24 23:20:33 [13347] [6] INFO: AT2[huawei_e220]: speed set to 115200 > 2012-01-24 23:20:33 [13347] [6] DEBUG: AT2[huawei_e220]: --> ATZ^M > 2012-01-24 23:20:33 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:33 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT^M > 2012-01-24 23:20:33 [13347] [6] DEBUG: AT2[huawei_e220]: <-- AT > 2012-01-24 23:20:33 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:33 [13347] [6] DEBUG: AT2[huawei_e220]: --> ^M > 2012-01-24 23:20:35 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT^M > 2012-01-24 23:20:35 [13347] [6] DEBUG: AT2[huawei_e220]: <-- AT > 2012-01-24 23:20:35 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:35 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT&F^M > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: <-- AT&F > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: --> ATE0^M > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: <-- ATE0 > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: --> ATI^M > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: <-- Manufacturer: > huawei > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: <-- Model: E1752 > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: <-- Revision: > 11.126.13.00.00 > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: <-- IMEI: > 354639045388268 > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: <-- +GCAP: > +CGSM,+DS,+ES > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: found string > <huawei>, using modem definition <Huawei> > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT+CSMS=?^M > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: <-- +CSMS: (0-1) > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:36 [13347] [6] INFO: AT2[huawei_e220]: Closing device > 2012-01-24 23:20:36 [13347] [6] INFO: AT2[huawei_e220]: opening device > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: device opened. > Telnet mode = 0 > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: device opened > 2012-01-24 23:20:36 [13347] [6] INFO: AT2[huawei_e220]: Logging in > 2012-01-24 23:20:36 [13347] [6] INFO: AT2[huawei_e220]: init device > 2012-01-24 23:20:36 [13347] [6] INFO: AT2[huawei_e220]: speed set to 115200 > 2012-01-24 23:20:36 [13347] [6] DEBUG: AT2[huawei_e220]: --> ATZ^M > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT^M > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- AT > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT&F^M > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- AT&F > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: --> ATE0^M > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- ATE0 > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT+IFC=2,2^M > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT+CPIN?^M > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- +CPIN: READY > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT+CMGF=0^M > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT+CSMS=?^M > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: --> > AT+CNMI=1,2,0,0,0;+CMEE=1^M > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- +CSMS: (0-1) > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT+CPMS="SM"^M > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:37 [13347] [6] INFO: AT2[huawei_e220]: AT SMSC successfully > opened. > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- +CPMS: > 0,50,0,50,0,50 > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > 2012-01-24 23:20:37 [13347] [6] DEBUG: AT2[huawei_e220]: --> AT+CPMS?^M > 2012-01-24 23:20:38 [13347] [6] DEBUG: AT2[huawei_e220]: <-- +CPMS: > "SM",0,50,"SM",0,50,"SM",0,50 > 2012-01-24 23:20:38 [13347] [6] DEBUG: AT2[huawei_e220]: <-- OK > > ==================================================== > > > =========== > sqlbox.config > =========== > ##--------------------------------------------- > ## SQLBOX > ## Pulls MO and MTs from a database > group = sqlbox > id = dlr2 > smsbox-id = mysmsbox > global-sender = "xxxxxxxxxxxx" > bearerbox-host = localhost > bearerbox-port = 13001 > smsbox-port = 13003 > smsbox-port-ssl = false > sql-log-table = sent_sms > sql-insert-table = send_sms > log-file = "/tmp/kannel-sqlbox.log" > log-level = 0 > #ssl-client-certkey-file = "" > #ssl-server-cert-file = "" > #ssl-server-key-file = "" > #ssl-trusted-ca-file = "" > > ## Database connection examples. Please uncomment as needed > # > # Example MYSQL Connection > group = mysql-connection > id = dlr2 > host = localhost > username = mysqluser > password = mysqlpwd > database = playsms > max-connections = 10 > > ### DLR table structure > group = dlr-db > id = dlr2 > table = playsms_kannel_dlr > field-timestamp = server_date > field-smsc = smsc > field-destination = destination > field-source = source > field-service = user_service > field-url = url > field-mask = mask > field-status = status > field-boxc-id = boxc > > > ========= > smsbox log > ==================================================== > 2012-01-24 23:23:42 [13445] [0] INFO: Starting to log to file > /tmp/_smsbox.log level 0 > 2012-01-24 23:23:42 [13445] [0] INFO: Added logfile `/tmp/_smsbox.log' with > level `0'. > 2012-01-24 23:23:42 [13445] [0] INFO: Service global sender set as '+91' > 2012-01-24 23:23:42 [13445] [0] INFO: Logging accesses to > '/tmp/_smsbox-access.log'. > 2012-01-24 23:23:42 [13445] [0] INFO: Started access logfile > `/tmp/_smsbox-access.log'. > 2012-01-24 23:23:42 [13445] [0] INFO: HTTP: Opening server at port 13018. > 2012-01-24 23:23:42 [13445] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller) > 2012-01-24 23:23:42 [13445] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps > to pid 13445. > 2012-01-24 23:23:42 [13445] [0] DEBUG: Started thread 2 > (gwlib/http.c:server_thread) > 2012-01-24 23:23:42 [13445] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) > maps to pid 13445. > 2012-01-24 23:23:42 [13445] [0] INFO: Set up send sms service at port 13018 > 2012-01-24 23:23:42 [13445] [0] DEBUG: Started thread 3 > (gw/smsbox.c:sendsms_thread) > 2012-01-24 23:23:42 [13445] [3] DEBUG: Thread 3 (gw/smsbox.c:sendsms_thread) > maps to pid 13445. > 2012-01-24 23:23:42 [13445] [0] DEBUG: > ---------------------------------------------- > 2012-01-24 23:23:42 [13445] [0] DEBUG: Kannel smsbox version 1.5.0 starting > 2012-01-24 23:23:42 [13445] [0] DEBUG: dumping group (sendsms-user): > 2012-01-24 23:23:42 [13445] [0] DEBUG: <group> = <sendsms-user> > 2012-01-24 23:23:42 [13445] [0] DEBUG: <max-messages> = <10000> > 2012-01-24 23:23:42 [13445] [0] DEBUG: <username> = <tester> > 2012-01-24 23:23:42 [13445] [0] DEBUG: <concatenation> = <true> > 2012-01-24 23:23:42 [13445] [0] DEBUG: <password> = <foobar> > 2012-01-24 23:23:42 [13445] [0] DEBUG: Started thread 4 > (gw/smsbox.c:obey_request_thread) > 2012-01-24 23:23:42 [13445] [4] DEBUG: Thread 4 > (gw/smsbox.c:obey_request_thread) maps to pid 13445. > 2012-01-24 23:23:42 [13445] [2] DEBUG: HTTP: Including port 13018, fd 8 for > polling in server thread > 2012-01-24 23:23:42 [13445] [0] DEBUG: Started thread 5 > (gw/smsbox.c:url_result_thread) > 2012-01-24 23:23:42 [13445] [0] DEBUG: Started thread 6 > (gw/smsbox.c:http_queue_thread) > 2012-01-24 23:23:42 [13445] [0] DEBUG: Connecting to <127.0.0.1> > 2012-01-24 23:23:42 [13445] [6] DEBUG: Thread 6 > (gw/smsbox.c:http_queue_thread) maps to pid 13445. > 2012-01-24 23:23:42 [13445] [5] DEBUG: Thread 5 > (gw/smsbox.c:url_result_thread) maps to pid 13445. > 2012-01-24 23:23:42 [13445] [0] INFO: Connected to bearerbox at 127.0.0.1 > port 13017. > 2012-01-24 23:23:42 [13445] [0] DEBUG: Started thread 7 > (gw/heartbeat.c:heartbeat_thread) > 2012-01-24 23:23:42 [13445] [7] DEBUG: Thread 7 > (gw/heartbeat.c:heartbeat_thread) maps to pid 13445. > > > ========= > sqlbox log > ==================================================== > 2012-01-24 23:23:04 [13420] [0] INFO: Starting to log to file > /tmp/_kannel-sqlbox.log level 0 > 2012-01-24 23:23:04 [13420] [0] INFO: Added logfile `/tmp/_kannel-sqlbox.log' > with level `0'. > 2012-01-24 23:23:04 [13420] [0] INFO: MYSQL: Connected to server at localhost. > 2012-01-24 23:23:04 [13420] [0] INFO: MYSQL: server version 5.5.16-log, > client version 5.5.16. > 2012-01-24 23:23:04 [13420] [0] DEBUG: Started thread 1 > (sqlbox.c:sql_to_bearerbox) > 2012-01-24 23:23:04 [13420] [1] DEBUG: Thread 1 (sqlbox.c:sql_to_bearerbox) > maps to pid 13420. > 2012-01-24 23:23:04 [13420] [1] DEBUG: Connecting to <127.0.0.1> > 2012-01-24 23:23:04 [13420] [1] INFO: Connected to bearerbox at 127.0.0.1 > port 13016. > 2012-01-24 23:23:04 [13420] [1] DEBUG: Started thread 2 > (sqlbox.c:bearerbox_to_sql) > 2012-01-24 23:23:04 [13420] [2] DEBUG: Thread 2 (sqlbox.c:bearerbox_to_sql) > maps to pid 13420. > > > > > Willy Mularto F300HD+MR18DE (NLC1725) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.kannel.org/pipermail/users/attachments/20120125/a45978e5/attachment.html> ------------------------------ _______________________________________________ users mailing list users@kannel.org http://www.kannel.org/mailman/listinfo/users End of users Digest, Vol 65, Issue 38 *************************************
